Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹67.6 LAccepted-AOC | ₹67.6 L | L1 | Accepted-AOC As Per Financial Evaluation |
| 2 | L2₹68.0 LRejected-AOC | ₹68.0 L | L2 | Rejected-AOC As Per Financial Evaluation |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not Complied in Prahri |
Tender Value
₹68 L
EMD Value
₹5.4 L
Closing Date
29 Dec 2025, 12:00 pmClosed
Superintending Engineer
Office of the Superintending Engineer, A.C., PWD, Aligarh
As Per BOQ
2025_CEALG_1100466_1
7015/Cashier(CDK)-A.C./2025-26 Dt-10-12-2025
Open Tender
Civil Works - Bridges
180 days
Kasganj
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,714
₹5.4 L
Yes
21 Feb 2026
20 Dec 2025
29 Dec 2025
20 Dec 2025
29 Dec 2025
20 Dec 2025
20 Dec 2025 - 29 Dec 2025
Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per MoRTH Technical Specification Clause 202. (Including All Taxes but Excluding GST)
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shouring and bracing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material. (Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORTH Clause 304(3.13)
Sand Filling in Foundation Trenches as per Drawing & Technical Specification (Including All Taxes but Excluding GST. MoRTH Clause 304(12.3)
PCC M-15 Grade leveling course below approach slab complete as per drawing and technical specifications. (Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 2700(14.10)
Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (PCC Grade M-15). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8)
Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (PCC Grade M-20) Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8)
Plain / Reinforced cement concrete in open foundation complete as per drawing and technical specifications (RCC Grade M-25). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2100 (12.8)
Plain / Reinforced cement concrete in Sub structure complete as per drawing and technical specifications (RCC Grade M-25) height up to 5m. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1700, 2200 (13.5)
Furnishing and placing Reinforced / prestressed cement concrete in super structure as per drawing and technical specifications (RCC Grade M-25). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1600, 1700 (14.1)
Reinforced cement concrete approach slab including reinforcement and form work complete as per drawing and technical specifications. RCC Grade M-30 (Approach slab). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1500, 1600, 1700, 2704 (14.11)
Providing and laying Cement concrete wearing coat M-30 Grade including reinforcement complete as per drawing and technical specifications (RCC Grade M-30). Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 2702 (14.4)
Supplying fitting and placing Un-Coated HYSD bar Reinforcement in foundation complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600 (12.40)
Supplying fitting and placing HYSD bar Reinforcement in sub structure complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600, 2200 (13.6)
Supplying fitting and placing HYSD bar Reinforcement in super structure complete as per drawing and technical specifications. Including Cost of Material, labour, T&P and all taxes But Excluding GST. MORT&H Clause 1600 (14.2)
SUPPLY OF 1200mm Pipe RCC HUME PIPE NP-4 (SOCKET HUMEPIPE) (Including All Taxes but Excluding GST)
Construction of embankment with approved material obtained from borrow pits with all lift and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.2. and Cartage not less then 02 km. lead. As per clause 305 (Including All Taxes but Excluding GST)
Brick soling with straight overburnt bricks laid on edge including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labours, T&P etc. required for proper completion of work. SI No. 762B Ch 23 (Including All Taxes but Excluding GST)
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads up to 1 .00 km, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Including All Taxes but Excluding GST)
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 40 (Including All Taxes but Excluding GST) MoRTH Clause 401(4.1)
Providing, laying, spreading and compacting stone aggregates of specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 2 as per MoRTH Clause 405(4.8.3) (Including All Taxes but Excluding GST)
Providing, laying, spreading and compacting stone aggregates of specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 3 as per Technical Clause 405(4.8.3) (Including All Taxes but Excluding GST. Ch-20 SI-4(765))
Brick edging on both side of the road of M-150 bricks 8cm. (3") wide and 12cm (4½") deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth as directed by the Engineer-In-Charge. (Including All Taxes but Excluding GST) MoRTH Clause 502(5.1)
Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 to 1.00 kg/sqm using mechanical means (Including All Taxes but Excluding GST) MoRTH Clause 503-1(5.02)
Providing and applying tack coat with bitumen ,Using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including All Taxes but Excluding GST)
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. (Including All Taxes but Excluding GST) MoRTH Clause 508(5.9)
Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. (Including All Taxes but Excluding GST) MoRTH Clause 510(5.12)
Supply & Fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be concealed so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 as per direction of the Engineer-in-Charge. (Including All Taxes but Excluding GST)
providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm×75 mm×6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm×45 cm×60 cm. 60 cm below ground level as per approved drawing as per MORTH specification No-801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender (Including All Taxes but Excluding GST)
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.32 MB
BOQ_2027796.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid