01 (Sl.03) of 2026-27 of AE/PWD/APDSD

Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thick cement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm. high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paid separately) (a) For 20 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer)

Supplying fitting & fixing in position 16 mm thick Cement Bonded Particle Board confirming to IS:14276-1995 made out of 62% Cement, 28% Wood & 10% chemicals having density not less than 1250 Kg/cum, Bonding Strength 9 N/Sq.mm, Tolerance in thickness ±1 mm, Swelling in thickness ≤ 1% for 24 hrs immersion, with fire resistant & weather resistant properties including supplying 10 mm dia 75 mm long bolts with nuts & washer fitted after every 475 mm apart for holding the panels with supporting structure complete excluding cost of supporting structure as per direction of Engineer in charge.

Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig necessary bend, moulding fitted and fixed complete (for purpose of payment section will be measured in the square). (b) Ordinary teak

(A) Partition of commercial ply as per design fitted and fixed complete (excluding the supporting framework but including necessary teak wood battens of size 40mmx 25 mm): In Ground Floor (i) 4mm thick

(ii) 6mm thick

Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width (a) Ground Floor

Copal varnish of approved quality including preparing surface : (i) On new wood work : (b) Two coats

French polishing to wood work including preparing surface (ordinary gloss) (a) On new wood work

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor Two Coat

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. a) 3.90 metre height b) Extra for additional 3.6 height or part thereof (Total scaffolding required 35 numbers)