REPAIR RECANNING AND PAINTING TO STEEL FURNITURE AT GE DANAPUR CANTT AND REPAIR RECANNING AND POLISHING TO WOODEN FURNITURE REPAIR RECANNING AND PAINTING OF STEEL FURNITURE AND REPAIR MAINT TO GI CHARPOI AND OTHER MISC FURNITURE AT SDO MUZAFFARP

Amount

Almirah Steel med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one complete all as specified and directed. (a) Lock 6 levers with duplicate keys Qty: Danapur 300, Muzaffarpur 15

Handle 100 mm size chromium plated complete all as specified and directed. Qty: Danapur 240, Muzaffarpur 15

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 25, Muzaffarpur 5

Supply and fix leg made of 20 guage thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 120, Muzaffarpur 5

Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clamps complete all as specified and directed. Qty: Danapur 400, Muzaffarpur 20

Supply and fix door shutters made of 20 guage thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surfacecomplete all as specified and directed and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting) Qty: Danapur 18, Muzaffarpur 2

Supply and fix shelves made of 20 guage thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 100, Muzaffarpur 5

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends complete all as specified and as directed. Qty: Danapur 400, Muzaffarpur 25

Almirah steel large (FD-67/1031) S & F following components of Almirah steel med including dismantling unservicable one complete all as specified and directed. (a) Lock 6 levers with duplicate keys Qty: Danapur 100, Muzaffarpur 10

Handle 100 mm size chromium plated complete all as specified and directed. Qty: Danapur 100, Muzaffarpur 10

3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 20, Muzaffarpur 3

Adjustment/welding of exsisting shelves by providing new clamps after removing unserviceable clampscomplete all as specified and directed. Qty: Danapur 200, Muzaffarpur 20

Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 30, Muzaffarpur 5

Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and directed. Qty: Danapur 10, Muzaffarpur 2

Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer complete all as specified and directed. Qty: Danapur 50, Muzaffarpur 5

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. Qty: Danapur 200, Muzaffarpur 15

Couch Examination(i) Removing old u/s top of Couch and supply and fix new top of size 1800 mm x 900 mm made out of 100 mm thick cushion, 40 density pasted on 18 mm ply and covered with heavy duty latherite cloth of approved shade complete all as specified and directed.

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and directed.

Table 900x 600 mm steel with /W/O drawer (FD-1009) S & F following components of Table dinning 900x600 mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly upto 300 mm welded to the frame including minor repairs to the table and painting the replaced portion complete all as specified and directed.

Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around complete all as specified and directed.

Removing old U/S Drawer and S/F new drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing and providing new lock 6 lever to top drawer complete all as specified and directed.

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

PVC shoe complete all as specified and directed

Teapoy verandah -Taking down old unserviceable top and providing new top made up 18 mm thick BWR plywood pasted with .8mm thick white laminated sheet including 4 mm thick teak wood beading all round all as per drawing complete all as specified and directed.

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of white shade of approved quality.

Chair Verandah(FD-256)-Taking down old existing unserviceable cane from chair verandah and M&L for reweaving the same with new 4mm wide white plastic cane oval type best quality, in seat and back half round including removing of old paint after scrapping and applying two coats of sybnthetic ename paint white color including fixing 4 Nos PVC Shoes to the legscomplete all as specified and directed shown on drawing and as directed. Qty: Danapur 800, Muzaffarpur 25

M/L for point welding of Chair verandah(One point means welding to broken point alaround the pipe). Qty: Danapur 400, Muzaffarpur 10

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated Qty: Danapur 300, Muzaffarpur 15

Hasp & staple 100mm chromium plated Qty: Danapur 200, Muzaffarpur 5

Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. Qty: Danapur 120, Muzaffarpur 6

S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed. Qty: Danapur 10, Muzaffarpur 2

S & F new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel complete all as specified and directed. Qty: Danapur 200, Muzaffarpur 10

Preparation of old painted steel sufaces of locker steel by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of synthetic enamel paint of olive green shade/Smoke Grey of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. Qty: Danapur 350, Muzaffarpur 20

Table 1520 mm x 860 mm x 760mm S & F following components of Table dinning 1520 x 860 mm steel including dismantling unservicable complete all as specified and directed. (a) Leg/stiffener 32 x 32 x1.6mm thick MS squire pipe upto 300 mm duly welded to the frame including minor repairs to the table and painting the replaced portion.

Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade of size 1720 x 750 mm) including provision of 4mm thick teakwood beading all around complete all as specified and directed..

Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality.

PVC shoe complete all as specified and directed.

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe upto 300 mm duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

Lock 6 levers with duplicate keys (Make of Lock- LICO/Tulsi/VRL

Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty ofTable office Officer/Clerk Steel.

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel

Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel

PVC shoe

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel.

Chair tubler steel w/Arms/w/o arms- Removing of old unserviceable seats and S/F new seats of chair tubular steel with arm duly canned with heavy duty screw/nut .

Removing of old unserviceable back and S/F new back of chair tubular steel with arm duly canned .with heavy duty screw/nut

Removing of old unserviceable handle and S/F new handle of chair tubular steel with arm with heavy duty screw.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality complete all as specified and as directed.

Table Bed side Steel (Hospital)-Removing old U/s top and S/F new top of size 600mm x 380 mm of 18 mm comm ply covered with .5 mm thick Stainless steel duly welded and grinded at corner.

Removing old u/s Shutters and S/F new shutters as per exixting size of 1mm thick MS sheet hanged on two nos hinges as per drg duly complete all as specified and directed.

Removing olds u/s bottom/Middle shelves and s/f new bottom/Midlle shelves of 1mm thich complete all as specified and directed.

Removing old u/s legs and S/F new legs as per exixting size of 1mm thick MS sheet of 25 mm sqr tube of height 130 mm high duly fixed with welding as per drg duly and complete all as specified and directed.

M & L for removing of old rusted iron surfaces of Table bed side steel, applying with emery paper and painted with two coats of synthetic enamel paint of approved shades including 04 Nos heavy duty PVC shoes fixed with iron legs complete all as specified and as directed.

Charpoy folding plytop - Removing old u/s plywood and S/F new plywood top BWR 12mm thick with Nuts and bolts complete all as specified and directed.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of OG shade of approved quality incl 04 nos rubber shoes complete all as specified and as directed.

Chair School with Hand board - Removing seat and back in one piece and S/F new PVC seat & Back (in one piece of make Blowplast/Ballowa/supremel with four nos screw as per drg complete all as specified and directed.

Chair School with Hand board - Removing old U/STop ( Handrest ) and S/F new top (Handrest) with pvc edging made out of 18 mm thick MDF board of approved shade as per drg with four nos screw as per drg complete all as specified and directed.

Chair School with Hand board - Removing old U/S bottom basket and S/F new basket made out of MS bar as per drg with four nos screw as per drg complete all as specified and directed.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of black shade of approved quality complete all as specified and directed.

Double bunk bed - Removing old u/s plywood and S/F new plywood top BWR 12mm thick with Nuts and bolts as per drg.

Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of approved shade of approved quality incl 04 nos rubber shoes complete all as specified and directed.

PAINTING :-Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade as directed by GE for the following.

Book shelf open large steel

Rack adjustable steel 6 tier

Side Rack Steel with Tray

Shoe rack steel

Schedul of Muzaffarpur only

CHAIR DINING : FD-279, 228 Taking down carefully unserviceable parts of various items of furniture listed here-in-under and supply and fixing new parts made out of second class hard wood as per existing shape and size complete all as specified and as shown on drawing and as directed by Engr-in-Charge. Including two coats of french polish complete all as directed. Taking down carefully unserviceable back rail and S&F back rail rail made of 2nd class hard wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front legs made of 2nd class hard wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear legs made of 2nd class hard wood as per drg.

Taking down carefully unserviceable stiffeners and S&F stiffners made of 2nd class hard wood as per drg.

Taking down carefully unserviceable back rest and S&F back rest made of 2nd class hard wood as per drg.

Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg.

M&L for recaning the chair dining same with new 2mm wide oval type white plastic cane and bordering with 4mm wide white plastic cane complete along with fixing 04 Nos PVC toes in each chair after removing old pvc toes as directed by Engr in Charge.

Removing old stains and polish from old chair dining by using electric motor grinder and Emrik paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE.

TABLE DINING 6/8 PERSONS:FD-273,30(M) Taking down carefully unserviceable top and S&F new top for table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated MDF board exterior grade ISI marked with teak wood beading all round 4 mm thick all as shown on drg.

The same as per item No 78 above but for table dining 6 persons of size 1500 x 900 x 18/19 mm complete.

Taking down carefully unserviceable legs and S&F new legs of size 75 x 40 x 742 mm made out of 2nd Class hard wood all as specified and shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1800 mm made out of 2nd class hard wood complete all as shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1500 mm made out of 2nd class hard wood complete all as shown on drg.

Taking down carefully unserviceable short rails and S&F new short rail of size 25 x 100 x 900 mm made out of 2nd class hard wood complete all as shown on drg.

Taking down carefully unserviceable stiffener and S&F new stiffener made out of 2nd class hard wood 25 mm thick and 100 mm wide complete all as shown on drg.

Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe complete all specified and directed

Removing old stains and polish from old table Dining six/Eight person by using electric motor grinder and Emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shadecomplete all specified and directed

BED PLYTOP : FD-246 Taking down carefully unservicable long rails of bed plywood top and S& F of new long rails made of 2nd Class hard wood all as spefied and shown on drawing.

Taking down carefully unserviceable ply wood teak face and S&F 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest all as per drg.

The same as per item No 89 above but size 780 x180 mm for foot boards.

Taking down carefully unserviceable plywood top and S&F new commercial plywood 12 mm thick 7'x3' BWR confirming to IS: 303 as shown on drg.

Taking down carefully unserviceable bottom rails of bed ply wood top and S & F of new bottom rails of 2nd Class hard wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable head board and S & F of new head board made of 2nd Class hard wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable foot board and S & F new foot board made of 2nd Class hard wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable corner and S&F corner made of 2nd class hard wood to strengthen long rails and legs all as specified

Removing old stains and polish from old table by using electric motor grinder and Emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade complete all specified and directed.

Chair dining cushioned FD/E6/MAP/10 (R) S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and directed. (a) Rear leg

Front leg

Side/back/front rails

Stiffener

Providing new 75mm Cushion with tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office Make- Sleepwell/Featherfoam. Cost of tapestry cloth shall not be less than Rs 400/-per meter

Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and directed.

Sofa Set Five/four seater FD-281/ FD-373/ FD-258 Removing old unserviceable cushion with cover complete and S&F new cushions of 100 mm thick 32 Density (21`x 22`) with tapestry cloth cover (rates of cloth not less than 350 Rs per Mtr).cover shall be of overlapping type for easy open /close.

Removing old unserviceable cover and S&F new tapestry cloth cover (rates of cloth not less than 350 Rs per Mtr).Cover shall be made on overlapping type on one side to easy remove for cleaning/washing.(Sofa set 5/4 seater)

Removing old U/S arms of sofa set five/four seater and S&f new arms made out of sheesham wood all as specified and directed.

Removing old U/S Legs of sofa set five/four seater and S&f new legs made out of sheesham wood as specified and directed

Removing old u/S batten of sofa set five/four seater and S&f new batten made out of sheesham wood all as specified and directed.

Removing old stains and polish from old sofa set five/four seater by using electric motor grinder and Emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shadecomplete all as specified and directed.

Charpoy GI pipe (FD-220) S & F following components of Charpoy GI pipe including dismantling unservicable one all as specified and as directed. (a) Long rail made of 32 mm dia GI Tubing medium grade ISI mark 1.88 mtr long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow of charpoy.

3 way 32 mm dia GI elbow ISI mark

Check nuts of 32 mm dia

Conversion of 32 mm dia long rail obtained from item No 109 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

Conversion of 112 mm dia short rail obtained from item No 43 above into two numbers leg including fixing to 3 way 32 mm dia after one end threaded.

Removing old unserviceable/rusted /welded MS Plate and S/F new MS Plate of size 900mmx40mm x 5mm duly painted with black colour after applying red oxide after making two Nos hole with 75mmx6mm nut & bolts each.

M & L for removing old U/S plywood and S/F New 12 mm BWR phenol bonded commercial plywood of size 2020 mm x 900 mm including fixing of plywood with new 12 Nos Nut and bolts (75mmx6).Necessary reassembling the components as where required to fixing components and tighten the charpoy frame to make original shape of charpoy as per drg before fixing the ply top complete all as specified and directed.

The same as per item No 33 above but item Charpoy IP

The same as per item No 33 above but item Book shelf

The same as per item No 33 above but item chair writing steel

The same as per item No 33 above but item chair Easy steel

The same as per item No 33 above but item Rack stationary steel

M/S SAROJ KUMAR SINGH (BID ID -3377999)