Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹4.5 L
Closing Date
18 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Deposit Work
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
HYB Divn: Augmentation & Re-location of Bio-Tank Maintenance Shed at low lying area in CWS/LGD
113_DRM_W_HYB_26~SCR
113_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹4.5 L
25 Aug 2026
25 Aug 2026
4 Sept 2026
56 items across 6 schedules · ₹2,51,16,497.87 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 150 | 326.68 | 49,002 |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 864.54 | 494.1 | 4,27,169.21 |
| 3 | All kinds of soil | Sqm | 325.8 | 129.85 | 42,305.13 |
| 4 | All kinds of soil | cum | 622 | 177.5 | 1,10,405 |
| 5 | All kinds of soil. | cum | 104 | 260.3 | 27,071.2 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 630 | 196 | 1,23,480 |
| 7 | All kinds of soil | cum | 381.15 | 126.8 | 48,329.82 |
| 8 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 27 | 392.15 | 10,588.05 |
| 9 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 216 | 842.5 | 1,81,980 |
| 10 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 23.4 | 927.25 | 21,697.65 |
| 11 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 75 | 8,752.55 | 6,56,441.25 |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 765.6 | 738.65 | 5,65,510.44 |
| 13 | Ridges plain (500 - 600mm) | Metre | 50 | 532.35 | 26,617.5 |
| 14 | Crimp curve | Sqm | 86 | 496.75 | 42,720.5 |
| 15 | 1:4 (1 cement: 4 fine sand) | Sqm | 462 | 399.45 | 1,84,545.9 |
| 16 | 1:6 (1 cement: 6 fine sand) | Sqm | 678 | 383 | 2,59,674 |
| 17 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 575.6 | 160.6 | 92,441.36 |
| 18 | Two or more coats on new work | Sqm | 1300 | 146.8 | 1,90,840 |
| 19 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge. | cum | 135 | 2,914.3 | 3,93,430.5 |
| 20 | 25 mm dia nominal bore | Metre | 100 | 467.75 | 46,775 |
| 21 | 50 mm dia nominal bore | Metre | 50 | 762.15 | 38,107.5 |
| 22 | 25 mm nominal bore | Each | 10 | 622.4 | 6,224 |
| 23 | 50 mm nominal bore | Each | 5 | 1,026.65 | 5,133.25 |
| 24 | 300 mm dia. R.C.C. pipe | Metre | 50 | 994.3 | 49,715 |
| 25 | For vertical surface two coats @ 0.70 kg per sqm per coat | Sqm | 70 | 472.9 | 33,103 |
| 26 | For horizontal surface one coat @1.10 kg per sqm. | Sqm | 70 | 362.8 | 25,396 |
| Schedule total | ₹36,58,703.26 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
GCCServices2018_compressed1.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
SFMS.pdf
ATTACHMENT
SpecialConditionsofcontract.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .