Provn of guard room with toilet and bathroom at R Zone Md Accn of 25 Mech Inf (R and S) (WH), provn of 01 x storeage shed for 507 ASC Bn and certain sanctioned works under GE (East) Fzr Cantt.

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed.

M&L Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified and directed.

M&L Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L Mild steel 8mm dia TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spaces and binders etc complete all as specified and directed.

M&L for Use & waste wooden form work (rough finished) to sides of footing, Beams, etc complete all as specified and directed

M&L for Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Square, rectangular or polygonal etc. complete all as specified and directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and directed

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded crushed stone aggregate as in columns pillars, piers, post structs Footings the like complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified and directed.

M&L Reinforced cement concrete (Design mixed M-25) using 20 mm graded crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed

M&L Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified and directed

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L cement concrete 1:2:4 Type B-1 using 20 mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L Rendering/plastering, 15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with Double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in section 8, clause 8.24 (a) of MES Schedule Part-I, complete all as specified and directed

M&L Cement concrete (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in bed block of hold fast, coping including necessary form work complete all as specified and directed.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded crushed stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

Mild steel framed work of E-165 (Fe-290) as in grills/guard bars shouldered with steel window/ ventilator frames including red oxide primer coat complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including rolled and roller plate complete all as specified and directed.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified and directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified and directed.

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm complete all as specified and directed.

S&F glavanised mild steel wire cloth 0.56 nominal dial of wire and average width of aperature 1.18mm and fixed with finned tack or galvanised staple. complete all as specified and directed

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 160 of MES Schedule Part-II (2010).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2010) complete all as specified and directed. Make: Rajshri or equivalent make as approved by GE.

S&F PTMT butt hinges 100 mm long complete all as specified and directed.

S&F PTMT Tower bolt 150 mm long complete all as specified & directed

S&F PTMT pressed handle 150 mm size oval type stove enamelled black complete all as specified & directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L Cement concrete type D-2, 75 mm thick 1:4:8 (40mm graded aggregate) as in sub floors, sub bases, floors etc. complete all as specified and directed

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) over 20mm thick PCC 1:2:4 type B0 complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in white cement with pigment to match the colour of tilesover and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L Glazed ceramic coloured (colour & shade as approved) tiles of size 300x200x7mm thick on vertical surface set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tile. complete all as specified and directed.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs complete all as specified and directed.

S&F20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed complete all as specified and directed.

S & F for vitreous china squatting pan of pattern “Orissa Pattern” size 580 mm x 440 mm white with ‘P’ or ‘S’ trap, front or back inlet any pattern including provision of lime concrete bedding etc complete all as specified and directed. Make:-HINDWARE / Parryware as approved by GE

M&L 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as specified and directed. Make:- Parryware (Slimline) / Hindware (Sleek) or other equivalant make as approved by GE

S&F in repair 10 ltr capacity PVC low level flushing cistern syphonic action type with inlet ball valve, float and handle and including bracket and flush pipe complete all as specified and directed. Make:- Parryware (Slimline) / Hindware (Sleek) or other equivalant make as approved by GE

S&F Vitrous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe complete all as specified and directed.

S&F 100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with connections are fitted/sealed with M-seal including joints fixed to wall complete all as specified and directed.

All as per item No 56 above but size 75mm. complete all as specified and directed.

S&F cast iron Nahani trap 100 mm dia with gratting including jointing to waste pipe fixed with concrete cement in (1:2:4) type B1 using 20 mm graded crushed stone aggregate etc complete all as specified and directed.

S&F Cast iron floor trap of 100 mm dia, with grating including jointing to waste pipe fixed in cement concrete typee B1 (1:2:4) using 20 mm graded crushed stone aggregate, complete all as specified and directed.

S&F High density polythelne pipe of 50 mm bore dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F waste coupling of bore dia 32 mm of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F waste coupling of bore dia 32 mm of PTMT but suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed.

S&F PVC waste pipe, 32 mm bore suitable to waste coupling pipe attach with rubber ring joints complete all as specified and directed.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Stop/Angle Valve 15mm bore fancy type CP, Screwed down high pressure, with high pressure crutch or butterfly handle, screwed both ends for iron pipeor union complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and directed.

S&F Decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed.

S&F Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat chalk white primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and directed.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

S&F 150m dia Salt glased stopware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for concrete bed to drain pipes in cement concrete 1:3:6 type C2 using 40mm graded stone aggregates including paving under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates in manhole cover including necessary form work excluding reinforcement and set in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregates in surface channels and drains complete all as specified and directed.

M&L for mild steel TMT bar 8 mm dia, cut to length, bent to shape required includidng cranking, bending for hooping complete all as specified and directed.

Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil.

M & L 50mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor, fair finished. complete all as specified and directed.

M & L chequered cement concrete tiles with grey cement and pigment 25cm x 25cm x 20mm thick set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer of mortor in CM (1:6) complete all as specified and directed.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified and directed.

S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges

Reinforcement cement concrete in foundations, including rafts, footings, foundation beams, Plinth beam, bases of columns etc with RCC M-25 design mix concrete using 20mm graded crushed stone aggregate, complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed or bedding in CM 1:6 laid and jointed with grey cement slurry mixed with pigment tonmatch the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed or 10mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15mm thick rendering/screed bedding in CM 1:4 on concrete surfaces of sunken floor and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over a coat of bitumen [email protected] Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/Sqm) by tourch application method with minimum overlap of 75mm on longitudinal direction and 100mm in the transverse direction over and including a applying evenly a tack coat of blown bitumen at the rate of 0.30Kg/Sqm complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr means built in CM 1:4 complete all as specified and directed.

S&F Wash down water closet (pedestal pattern) vitreous china white including sheet cover,jet, connection to drain or out going pipe and to flushing pipe anti-syphonage pipe incl. stainless steel jet pressure etc, fixed in repairs, complete all as specified and directed.

S&F Cast iron, floor trap, sand cast, 75mm bore, with brass chromium plated grating including jointing to waste pipe in run lead complete all as specified and directed.

S&F cast iron cowls,75mm bore,(large bore measure) jointed in cement mortat complete all as specified and directed.

S&F Cast iron bend (any radius), 100mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified and directed.

S&F stop valve of 20mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwd both ends for iron pipe and fixed, complete all as specified and directed.

S&F Steel work in tabular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240 complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F anodised aluminium snap grid frame 605 x 605 mm for false ceiling complete all as specified and directed.

M&L for Providing & fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L PCC 1:4:8 type D-2 as in concrete bed to drain pipe including packing under haunching against the side of pipe after laid and tested for 150mm bore pipe. complete all as specified and directed.

M&L Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc. complete all as specified and directed.

S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed.

S&F in repairs 20 ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe(Min wt. 210 gms) complete all as specified and directed

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed.

S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed

S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed

S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed

S&F for 300 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&Lfor Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed.

S&F in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc.

S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. .

S&F in Repair to Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified and directed.

S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing surface complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (fitting measured separately).

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead as in repairs complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittingscomplete all as specified and directed

S&F in repairs vitreous china wash basin,white flat back,size (550X400) mm including 15 mm brass CP Pillar taps,waste coupling PTMT 32 mm,, brass CP stove valve15 mm, low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, and bracket complete all as specified and directed

S&F in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, including fixint to steel pipe or union complete all as specified and directed

S&F in repair Fancy type stop valve chromium plated 15mm dia concealed type complete all as specified and directed.

S&F grating doom 125 mm dia of PTMT (Min weight 25 grams) all as specified and directed by engineer-in--Charge.

S&F in repair Toilet paper holder rof viterous china fixed to walls with chromium plated (CP) brass screws

S&F PVC pipe 32 mm dia as in waste pipe to wash hand basin all as specified.

S&F in repair Brass chromium plated soap dish performed type complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switch complete all as specified and directed. (a) One light point / fan point/ Exhaust point controlled by one single pole one way switch.

All as per item No 138 above but One 3 pin socket outlet 5 amps independent board with cable 1.5 Sqmm size

All as per item No 138 above but One 3 pin socket outlet 5 amps on the same board with other switches with cable 1.5 Sqmm size

All as per item No. 138 above but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable. complete all as specified and directed.

S&F Glint Switch piano modular flush type of single module, 6 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make- INDOASIAN Cat Part No-800000. or other equivalant make as approved by GE

S&F Glint Switch piano modular flush type of single module, 16 amps, single pole one way made up of Polycarbonate FR material, duly ISI marked complete all as specified and directed. Make- INDOASIAN Cat Part No-800002 or other equivalant make as approved by GE.

S&F Glint modular Socket, 6 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed.. Make- INDOASIAN Cat Part no-800020 or other equivalant make as approved by GE

S&F Glint modular Socket, 6 /16 Amps 2/3 pin combined universal type of 2 module, pencil free operation with child safety shutter made up of Polycarbonate FR material, duly ISI marked, complete all as specified and directed. Make- INDOASIAN Cat Part no-800022 or other equivalant make as approved by GE.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent in Plaza/ INDOASIAN or other equivalant make as approved by GE.

S&F Glint fan regulator, electronic step type 100W capacity, of single module, single pole made up of Polycarbonate FR material, duly ISI marked. Make-INDOASIAN Cap Part no-800041 or other equivalant make as approved by GE.

S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39527 or equivalent in Plaza/ INDOASIAN or other equivalant make as approved by GE.

S&F LED bulb of 9 W, 220-240V, 50Hz, Cool day Light all as specified and directed. Make-Crompton, Model No-9W, LED Bulb PRO CDL or equivalent makes in Havells/ Surya/ Wipro as approved by GE.

S&F LED 20 W LED 6000 K, indoor E-Lite LED PRIDE PLUS NEO with wide angle profile. High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete. Make-Havells, Model-E-Lite LED PRIDE PLUS NEO (LHEXACP7IN1W020) or Crompton/ Syska LED as approved by GE

S&F bldg LED Security light fittings 25 watts including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and directed. Make- Crompton, Model-ASTRA NEO, Cat Part No-LSTS-25-CDL-M or Equivalent of Havells/ Bajaj as approved by GE

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed. Make:-Crompton, Model- EXHD300-6-1 or equivalent in Khaitan/ CG/ Bajaj as approved by GE

S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, at Bldgs upto 5 mtrs height, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint complete all as specified and as directed. Make-Crompton Greaves, Model- STAR220 1200MM WHITE-WOR or equivalant makes in Orient/ Havells/ Usha/ Bajaj/ Khaitan as approved by GE Note :- (i) PVC cable three core flexible of size 23/0.0076 more than 1.5 mtrs will be measured and paid separately. (ii) T&P reqd to be mannaged/ accepted by firms/ contractor. (iii) Transport/ conveyence upto working spot to be provided by firms/ contractor.

S&F three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed.

S&F Sheet metal enclosures with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 240V, 20 amps complete all as specified and as directed

S&F Desert cooler electric driven (single phase) made of 20 SWG black MS sheet of ISI marked, size not less than 90x70x70 cm surface area from top and bottom, 68x54 cm from front grill size including Tullu pump with 4 nos piano type 5 Amp switch on front side including, painting with powder coated paint over a coat of anti-corrosive paint steel body cosisiting of 450mm sweep cooler fan three speed (H.M.L) Make- of fan bajaj/Khaitan/Crompton/GEC input cap 220W approx 1400 RPM 230V 50Hz air delivery 4000 cum/hr incl water pump, wool pad of proper thickness will be provided in each panel, 3 core flexible cable PVC Shedthed insulated cable as per requirement with three pin 15 amp top ISI marked shall be provided complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed. Make- INDOASIAN, Cat Part No- 811807 or Make- Havells, Cat Part No- DHDNSHODAW08, as approved by GE

S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed. Make- HPL, Cat Part No- NTSPNB40 or equivalent makes in INDOASIAN/ Havells as approved by GE

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed. Make- HPL, Cat Part No- NTSPB6-32 or equivalent in INDOASIAN/ Havells as approved by GE

M&L for Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).

Supply, fixing connecting and testing energy efficient (BEE 5 Star rated) electric water heater vertical storage type of 25 Ltrs capacity with stainless steel inner tank, brass assembly, pressure release valve, heating element 1500W/2000W 9as per OEM) including all other accessories with high quality external finishes single phase with working voltage 240 volts, 50 Hz, ISI marked complete all as specified and directed. Note : The cost of fixing of geysers including non return valve/fasters, bolts, washers and making good the disturbed surface to match with the existing surface is deemed to be included in the unit rate quoted. Make- Bajaj/Crompton/ Recold as approved by GE

M&L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces including excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) .complete all as specified and directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed

Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sqmm 2 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed.

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X25mm dia including excavation, returning filling complete and all as specified and directed.

Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ ceiling including all fittings and short pieces complete all as specified and directed

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified and directed.

S&F Lamp holder, pendant/ batten syrface type, made up of Polycarbonate FR material with cord grip cap suitable for pendant fittings, complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partially immersed in wall, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs duly concealed in wall, factory made, including thermal based release adjustable type 4 pole 63 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and directed. Make- HPL/ INDOASIAN/ C&S/ Legrand/ Havells as approved by GE

M&L for Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in PVC rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).

Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 35 sqmm 4 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified. Make- Gloster/ Finolex/ Universal Cable/ Havells/ Kalinga/ Polycab as approved by GE

M/s Harkesh Kumar Bansal

Harmesh Kumar Sharma and Sons

RAKESH KUMAR SATISH KUMAR

Marwaha Builders

M/s Surjit Singh and bros

M/S M H Builders