RAJA TODARMAL SARVECHADH AVAM BHULEKH PRASIKCHAN SANSTHAN UTTAR PRADESH HARDOI UTTAR PRADESH HARDOI ME AWASIY BHAWNO KA ANURAKCHAN KARYA

Brick work with common burnt clay (non modular) bricks of class -150 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). DSR-6.1.1

12 mm thick plaster with cement and Coarse sand 1:4 Mortar D.S.R. 13.4.1

Providing and fixing Stainless steel kitchen sink as per IS 13983 with C.I Brackets and stainless steel plug 40 mm including painting and fitting brackets Size 510x1040mm bowl depth 250 mm DSR 17.10.1.1

Providing and fixing water closet squatting pan (Indian type W.C. pan) of size 580 x 440 mmwith 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete,including cutting andmaking good the walls and floors wherever required: as per DSR 17.1.1

Providing and fixing white vitreous china flat back of wall corner type lipped front urinal basin of 430x260x350 and one urinal basin with 5 liter white P.V.C. automatic flushing cistern D.S.R. 17.4.1

Providing and fixing 15mm nominal outer dia C.P.V.C. pipe having thermal stability for hot and cold water i/c all comp. of works as per D.A.R18.8.1

Providing and fixing 25mm nominal outer dia C.P.V.C. pipe having thermal stability for hot and cold water i/c all comp. of works as per D.A.R18.8.3.

Providing and fixing of 15 mm dia nominal bore brass stop cock of approved quality as per DSR 18.16.1

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm. as per SI no. -22.7.1

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre as per Sl no. -13.41.1 Two Coats

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per Sl no. -13.46.1 Two Coats

Provsion for SS Mosquito Proof Jali

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per Sl no. -13.62.1