Special repair to bldg No T-30 at A Grn and P-11 at B Grn at Khanbal of AGE P under GE 861 EWS

Amount

Taking down cement plaster on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for prepration of new plastered or unplastered surfaces of wall to receive 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M&L for preparation of new plaster surface surface of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer , complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed

M&L for 40mm thick Plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Supply only, glass diving strips 38mm wide 3mm thick laid as in desired design, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

M&L for 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.

M&L for 3mm thick figured glass,pin head type and glazing with oil putty in squares not exceeding 0.5sq.m in each pane complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each, complete as specified and directed

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed

Taking down shutters of any description not exceeding 1.00 Sqm each, and removing from site, complete all as specified and directed

M&L for 2nd class soft wood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for preparing surfaces of chowkhats new or old of any description treating ends of posts,backs of chowkats,etc.,area tarred exceeding 0.1sq.m but not exceeding 0.5sq.m each complete all as specified and directed.

S&F 35 mm thick factory made Plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated 2nd class HW rail and style all as specified and directed by Engr-in-Charge.

S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinet together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.

S&F 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed

S&F Mild steel sliding door bolts, plate type, stove enamelled black withbright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed .Length of bolt 150mm.

S&F 100 mm long, mild steel cold rolled Butt hinges, medium weight, complete all as specified and directed.

S&F 75 mm long, mild steel cold rolled Butt hinges, medium weight, complete all as specified and directed.

125mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed.

S&F 35mm thick second class hard wood, glazed and skeleton shutters, factory made divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed

S&F 30mm thick second class hard wood, glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of sash bars and framing moulded, and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b); supplied and fitted to chowkhats, complete all as specified and as directed

S&F 150mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed.

Supply and fix stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples,complete all as specified and directed

Supply and fix in repair stainless steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples,complete all as specified and directed

Dismantling plain or corrugated sheeting any gauge thickness including Nanital or similar pattern roof covering.

S&F 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

All as per Serial Item No Serial Item No 38 above but except sheeting, all as specified. Note:- Serviceable sheets retrieved from Serial Item No 37 above shall be used.

S&F 0.80mm thick plain galvanized mild steel sheeting in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and directed.

Preparing New zinc (or galvanized surface to receive painting by coating with mordant solution including washing and cleaning and applying two coats of synthetic enameled paint over one coat of red oxide primer as in roofs/walls complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor hearth or wall tiling, chequered cement concrete tiles incl cement mortar bedding (but not backing) all as specified.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed.

M&L for glazed ceramic coloured tiles 350mm x 250mm x 7mm/ 450mm x 350mm x 7mmthick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

Dismantling of unframed timber scantlings 40 Sqcm and over in section in any position complete all as specified and directed

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 13 but not exc 25 sqcm complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull nosed,splayed,chamfered or rounded on one edge or face complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. complete all as specified

M&L 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

S&F in repair vitreous china, wash hand basin, coloured, round shape, of size 550mmx400mm including bracket and pinning ends of brackets or errecting stand, including brass, chromium plated, waste coupling 32mm,PVC waste pipe 32m da and 15mm bore dia brass stop valve and one PVC connection 15mmsize with PTMT nuts of length 450mm long screwed down for iron pipe and fixed, complete all as specified and directed.

Taking up or down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

S&F Mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Fixing only GI tubing in any grade to walls or floors 15 mm, including all fittings all as specified and directed.

Taking up or down 20 mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.

S&F Mild steel galvanised iron water tubing 20 mm bore with screwed & socket joints, medium grade with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Fixing only GI tubing in any grade to walls or floors 20 mm including all fittings all as specified and directed.

S&F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed

S&F in repairs 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,complete all as specified and directed

S&F in repairs 15mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets, complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including flush pipe to squat pattern closet including all joint making good to the floor complete all as specified and directed

S&F in repair for Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high prressure of PTMT with epoxy coated alu rod & high density plastic ball including taking down existing tank complete all as specified

S&F in repairs tubular towel rail, chromium plated , 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm with or without swivel joints any size including fixing to steel pipe or union complete to walls & floors etc

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide with chromium plated bracket guard and railing 60cm long all as specified.

S&F in repair dropery curtain rod, anodised aluminium alloy, 20mm dia with brackets, stops, rollers etc complete all as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified .

M & L for precast cement concrete block masonry , type B-1 (1:2:4) 20mm graded aggregate,with hollow blocks exc 10cm in width set in CM 1:4, complete all as specified as directed by Engr-in- Charge

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor, complete all as specified and directed.

M& L for forming construction joints 30mm deep x10mm wide with sealing compound grade A complete all as specified and directed.

Demolition of reinforced cement concrete of any description ( reinforcement cut as reqd to facilitate demolition ) complete all as specified and directed

M&L for RCC M-25 design mix using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works n. exc. 200 mm thick (Horizontal or sloping), finishing rough the concrete surfaces, complete all as specified and directed.

M&L for MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, including hacking out old glass panes, complete all as specified and directed.

S&F in repair stainless steel grating doom 125mm dia, complete all as specified and directed

S&F 15mm bore pillar tap,fancy type, cast copper alloy, with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repair), complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

Point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl necessary fittings & fixture and to be turminated in sunk cast iron/pressed steel/PVC terminal boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-86 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per srl item No-86 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per serial item No 86 here-in-before but for 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead, complete all as specified and directed.

M & L Sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4.0 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv, complete all as specified and directed.

S&F Switch piano flush button types 5/6 Amp, single pole, one way complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5/6 pin, 5 and 15 Amp, flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1, outlet 5 pin, 5 Amp flush type, universal, complete all as specified and directed.

S&F Bell push , AC 230 Volt, single pole, complete all as specfied and directed.

S&F Bell multi music type , AC 230 Volt, single pole, complete all as specfied and directed.

S&F Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/Polycarbonate, isolated body, complete all as specified and directed.

S&F decorative ultra slim linear LED in replacement of 18 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack including LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed. Make : Havells Cat Part No LHEXBLP5PN1W018 or Equivalent/C&S/Bajaj.

Supply and fixing in repair LED bulk head fitting 13.5 W environmental friendly ,ultra modern ,energy saving ,surface mounted ,decorative bulk edge lit LED lamp and all accessories for fixing on wall all as specified and directed by Engr-in-Charge.

S&F Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular, suitable for batten fittings including LED lamp 10watt complete all as specified and directed.

M & L for Sheet metal enclosures distribution board, single pole and neutral 4 way with 200 Amps rated bus bar 240 V, double door IP-42 protection, fixed on wall duly groted in solid block wall or n wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed.

M & L for Sheet metal enclosures distribution board, single pole and neutral 8 way with 200 Amps rated bus bar 240 V, double door IP-42 protection, fixed on wall duly groted in solid block wall or n wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed.

S&F in replacement MCB SPN, 40-63 Amp, 240 volts, 10kA, 50Hz, 'B' series and making connections, complete all as specified and directed.

S&F in replacement MCB SP, 6 to 32 Amps, 240 Volts 10 KA, 'B' series and making connections, complete all as specified and directed.

S&F in replacement Isolator 4 pole, 'B' series, 100 Amp, 415 volts, 10kA, 50Hz and making connections, complete all as specified and directed.

Material & labour for repair of earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply and fixing in repair LED bulk head fitting 9 W in engineering plastic housing with clear prismatic diffuser, including LED lamp and all accessories for fixing on wall all as specified and directed by Engr-in-Charge.

M & L for Sheet metal enclosures distribution board, single pole and neutral 12 way with 200 Amps rated bus bar 240 V, double door IP-42 protection, fixed on wall duly groted in solid block wall or n wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed.

Supply and fixing exhaust fan 300mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/ply board 1 inch thichness , including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply and fixing exhaust fan 450mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/ply board 1 inch thichness , including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply, laying commissioning, testing of XLPE in replacement of under ground LT cable 1100 volts grade of size 10 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches/fixing on wall/under road crossing etc in PVC conduit pipe with the help of clamp/shadels, under road crossing through protection pipe etc after taking out existing under ground cable complete all as specified and directed.

M/S Sheikh and Co

JANDOO AND CO.

BHAT CONSTRUCTIONS AND BUILFERS

M/S RASHID CONSTRUCTION

M/S GH MOHAMMAD DAR