REPAIRS TO INTERNAL WATER SUPPLY, SANITARY FITTINGS, CLEANING /REPLACEMENT OF OVERHEAD TANKS AND ALLIED SERVICES IN TECHNICAL AREA AND DOMESTIC CAMPS INCLUDING PREVENTIVE MAINTENANCE OF E/M INSTALLATIONS UNDER GE AVADI.

Amount

BR PORTION

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

Dismantling of Stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, apron etc complete all as specified and directed.

M&L for Demolition Cement concrete concrete (unreinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed

M&L for Demolition Reinforced Cement concrete concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as directed.

Taking down plastering in cement or cement-lime mortar up to any height (one side only measured in cases where both sides are plastered) etc complete all as specified and directed.

Taking down chowkhats or frames with shutters and (without taking off shutters from frames) n.exc 1.5 sq. m each complete all as specified and directed.

Taking up or down steel tubing and connections, including removal to store etc all as directed for 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, including removal to store etc all as directed for 20mm bore complete all as specified and directed.

Taking down PVC pipes / (any pipe of any size) or pattern incl all fittings, head shoes, bends swan necks etc including cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Demolition of stones or brick masonry or block walling, built in cement mortar including all quoins, arches etc., but excluding ashlar facing, dressed stone work etc.complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.

M&L for Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6 (01 cement : 06 coarse sand) all as specified & directed.

M &L Rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) all as specified and directed.

M&L for Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for RCC M 25 Design mix using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed .

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed .

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

M&L for Non-skid ceramic coloured tiles (matt finish), 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 square metre but not exceeding 0.11 square metre, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B1 quality over cement screed 1:4, 15mm thick applied with cement slurry at the rate of 3 kg / square metre complete all as specified and as directed.

M&L for Non-skid ceramic coloured tiles (matt finish), coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and including 15mm thick bedding layer in cement mortar 1:6 (01 cement : 6 coarse sand) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non-skid ceramic coloured tiles (matt finish), coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dado etc . set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed.

M &L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in levelling course all as specified and directed.

PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base or foundation ,mass concrete etc.complete all as specified & directed .

S&F Coloured Glazed tiles 300x200x7mm thick, on walls/vertical etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface all as specified and directed.

M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

Providing PCC 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platescoping including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

M& L for 15 mm rendering in cm (1:3) with WPC as in sunken floor finished the surfaces even and smooth without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately

M&L for applying evenly a coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @0.30 lit/sq.m including cleaning surfaces etc complete all as specified and directed including water tightness testing.

M&L plain cement concrete Type E2 1:5:10( 40 mm graded aggregate) as in sunken floor filling etc complete all as specified and directed.

M & L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm thick MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR Pt II of 2010 incl pvc hinges 100 mm size – 3 Nos for each shutter complete all as specified and directed.

Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20738). (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:-Section No .

Supply, fabricate and fixing in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position all as specified and directed. Note for Serial Item Nos 35.00 & 36.00:- (i) Section No given above are of Make-Jindal and are for guide line. (ii) The measurements shall be taken actual at site, any wastage shall be included in the rates quoted.

S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Grade E-165 all as specified and directed.

Forming jambs, etc to openings including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete in cement mortar 1:4 all as specified and directed.

Making good under cills or over arches lintels and bressummers including all pinning when necessary complete in cement mortar 1:4 all as specified and directed.

S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F Unplasticised PVC pipes and fittings of 20mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F Unplasticised PVC pipes and fittings of 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

M&L for Cutting chases or making holes in brick walls for concealed water tubing, making good to facings where required, cutting not exc 10 cm girth all as specified and directed.

S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs 15mm dia stop valve/Angle valve, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for PVC/iron pipes or for unions and fixed of,complete all as specified and directed.

S&F brass CP two way bib tap of 15mm dia chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for PVC/ iron pipe or for brass ferrule and fixed complete all as specified amd directed .

S&F in repairs chromium plated shower roses 125mm dia with or without swivel joints any size, including fixing to steel pipe or union complete all as specified and directed

S & F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S & F in repairs Vitreous china, semi-pedestal pattern (Anglo-Indian Type) , white including fixing bolts, plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repairs, all as specified and directed.

S & F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle 10 litre capacity including brackets, flush pipe and all accessories all as specified and directed.

S & F in repairs of 2-in-1 faucet with 1.5m tube and hook all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete all as specified and directed

S&F in repair 15mm dia chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash Basin (countertype type) , including brackets, CP waste coupling 32mm and waste pipe, including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed

S&F in repair 15mm dia Swan neck type chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repair vitreous china urinal half stall urinal type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as directed.

S & F in repair vitreous china urinal bowl (back or corner wall type) type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, complete all as specified & directed.

S&F in repairs Stainless steel Soap dish fixed to wall all as specified and directed

S & F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S & F in repair 32mm bore PVC waste pipe for sink / wash basin 90cm long all as specified and directed.

S & F in repairs plastic water closet seat cover, black or white closed pattern with flat bottom and cover and mild steel chromium plated hinging device all as specified and directed.

S & F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity conforming to IS specification and incl dismantled water tanks removed to store all as specified and directed.

S&F in repair 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl taking down old all as specified and directed

S & F in repairs 25mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) all as specified and directed.

S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) all as specified and directed.

Disconnecting and cleaning of HDPE tank of capacity exc 250 liter and n. exc 500 liters cleaning and removing all scale and dirtfrom wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refxing same position to adistance not exceeding 50m and deposting complete all as specified and directed.

Disconnecting and cleaning of HDPE tank of capacity exc 500 liter and n. exc 1000 liters cleaning and removing all scale and dirtfrom wall and floors by rubbing with brushes, cleaning with caustic soda etc etc complete and finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc and refxing same position to adistance not exceeding 50m and deposting complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 600 mm,complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges of cupboard all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or floor, of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia of any radius with access door with rubber ring joints fixed to wall or floor all as specified and directed.

S&F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal with rubber ring joints fixed to wall or floor all as specified and directed.

S&F for 110mm dia PVC (SWR) vent cowl with rubber ring joints fixed to wall or floor all as specified and directed.

S&F 75 mm bore PVC ( SWR) pipes of single socketed in any length with rubber ring joints fixed to wall or floor all as specified and directed.

S&F 75 mm bore. PVC (SWR) bends with rubber ring joints fixed to wall or floor all as specified and directed.

S&F for 75mm dia PVC (SWR) junction double, (double T), equal or unequal with rubber ring joints fixed to wall or floor all as specified and directed.

S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

EM PORTION

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of CI/GI water tubing and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5M above the starting point completed all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Dismantling the old rusted sign board and supply and fixing in replacement of new weather proof sign board for water supply installation/ Electric supply installation at Avadi incl fabrication of rectangular MS pipe of size 50 mm X 25 MM framed 8 Ft X 4 Inches long and and 2 Ft X 4 inch width having provision with strips for fixing the sign board sheet duly painted with two coat of synthetic enamel white paint over a coat of red oxide primer and fixed with aluminium composit panel not less than 3 mm thick duly company painted with the MES blue colour one side and gray colour other side of size 8 ft X 2 ft printed with computerised printing white strikers as on blue side for marking the name of installations 9.0 inches in height and 6 inches in width, MILITARY ENGINEER SERVICES duly border with red colour tape as per site requirement in respect of different locations and installations under GE Avadi . Fixing the same on wall of installations with proper alignment using not less than 08 Nos fasterner with nuts, bolts and washers all as specified and directed .

Dismantling the old and painted equipment history sign board at installations in replacement and fabricated the new sign board not less than 2.25 feet in length and 4 feet in height printed with white stickers with complete detail of machinery ( ie name of Installstion, date of Installstion, SM No, MES No, capacity of the mechanary , date of manufacturer, initial Amount , Machinery supplied by the firm, Job No, CA No, other requirements as directed) made of aluminium composit panel not less than 3.0 mm thick duly company painted with the MES blue colour one side and grey colour other side computerised printing white strikers as on blue side for marking the name of installations, duly border with red colour tape as per site requirement and framed with aluminium binder in respect of different locations and installations under GE Avadi . Fixing the same on wall of installations with proper alignment using necessary fasterner with nuts, bolts and washers all as specified and directed by Engr-in-charge.

M&L in replacement of earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints.

S&F in replacement for GI strip of size 32x6 mm from test point to transformer or other places complete all as specified and directed.

Replacement of earth pit size of 300mm(L)x 300mm(W)x 200mm(H) incl required exacavation, earth work and PCC work to make good damaged/disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate, RCC cover complete all as specified & directed

Replacement of wire mesh funnel GI type for fixing in 20/32mm dia GI light grade pipe complete all as specified & directed

Material & labour, Supply of salt and mixing in water, and pouring into earth pit through watering pipe of chamber, in adequate quantity as to maintain earth resistance value within permissible limit, complete all as specified and directed.

Supply of Charcoal/coke powder, mixing in water and pouring into earth pit through water pipe of chamber, in adequate quantity to maintain earth resistant value within permissible limit, complete all as specified and directed.

Material and labour, Supply of magnesium sulphate (MgSO4), mixing in water and pouring into earth pit through water pipe of chamber, in adequate quantity to maintain earth resistant value within permissible limit, complete all as specified and directed.

Servicing and repair/maint of Starter Panel upto 2 HP capacity , Single phase including replacement of relay, start / stop push button, Neon Indicator lamps, Intrernal copper / brass , thimbles etc complete links and applying necessary grease to link of panel all as specified and as directed. Note spare part such as relay, push button , lamps brass links etc included in the quoted rate.

Servicing and repair/maint of Starter Panel upto 5 HP to 7.5 HP capacity , three phase including replacement of relay, start / stop push button, Neon Indicator lamps, Intrernal copper / brass , thimbles etc complete links and applying necessary grease to link of panel all as specified and as directed. Note spare part such as relay, push button , lamps brass links etc included in the quoted rate.

Supply and fix in replacement LED 10 -50 Watt Aviation obstruction light, from OH tank upto height 21 mtr, having aviation yellow painted die- cast aluminium alloy housing, 02 Nos red collured poly carbonate dome and accessoried , 220 volt , 50 hz, fixed on OHT including with GI Pipe and PCC Work complete fitting all as specified and as directed .

Supply and laying or fixing in replacement 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed in service connections , one twin core 10 Sqmm cable standard conductor cable flat or circular including PVC conduit of size 25mm dia fixed on wall of OH tank upto height 21 mtr for fixing of Aviation light and security lights on OH tank, Pump house/ STP or all as specified and directed .

Supply and laying synthetic rubber insulation mats 2.5 mm thick (including pasting on floor ) for voltage upto 11KV for electrical purpose as per IS 15652-2006 suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed

Excavating and relaying cables LT loops near the poles LT Panels, cutting the damages/burnt parts of cable and reconnecting its into positions complete with thimbles, nut bolts, sleaves all as specified and directed.

Material and labour in replacement of medium voltage fire resistant high quality PVC self adhesive electrical insulaion tape (Red, Yellow, Blue & Black) high quality size minimum 18mm width and 7 mtr long complete all as specified and directed.

supply and fix electrical shock treatment chart in Local Language and English on wooden framed board of size 50cm x 75 cm complate in all respect all as specified and as directed

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and removing rubbish off the premises etc complete all as specified and directed.

Material & labour for providing 20mm broken stone aggregate including spreading and levelling complete all as specified and directed.

S&F for replacement of 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality incl stainless steel studd (size of board , design of bd , type of print on sheet , size of studd not less than 35mm x 22mm dia, samples of letter, pictures, writing will be provided by the Engineer in Charge) and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm. (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818) complete all as specified and directed. Stainess steel shall be measured and paid separately.

M&L for replacement of glow sign board frame / standing sign board made out of stainless steel tubular / flat / angle as in any size ,dia and stainless steel of grade A-ISI 304(1818) complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate including demoliton of old as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2, using 20 mm graded stone aggregate including demoliton of old as in foundation, filling and mass concrete complete all as specified and directed.

Fixing only chain link fencing including line wires , any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

Supply only mild steel galvanised, chain link fencing of 50x50mm mesh size and 3mm dia wire including replacement of old complete all as specified and directed.

S&F in replacement of galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (Note: Each line wire shall be measured for payment)

S&F in replacement of mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F in repair framed work suchas grills, grating etc with end of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, wlk ways, raailing, framed ork of water tanks and similar work confirming to FE 290 Gde E-165 complete all as specified and directed.

Supply only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) including replacement of old complete all as specified and directed. Note:- 10mm dia MS rods 3 Nos shall be provided horizontally by interwewaving in the chain link and welded with MS flat iron.

S&F in replacement of mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and directed.

S&F in replacement of Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E-250) quality-complete all as specified and directed.

M&L replacement and for preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified

M&L for replacement and for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for fixing in replacement of Aluminum Bus Bar having current rating 800 Amp duly insulated with colour coding RYB and Black all as specified and as directed including making holes on the bus bar for making necessary connections all as specified and as directed.

Material and labour for demolition of old broken / usnv valve pit and construction masonary valve chamber size 120 X 120 X 120 cm (Internal dimension) in repair with 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) sub base of floor, 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floor finished even and smooth without using extra cement, one brick thick wall in cm 1:4 using old size sub class 'B' bricks and plastering internally and externally upto 150mm below GL 15 mm thick with cement mortar (1:4) and MS sheet cover not less than 6 mm thick with angle iron frame size 40x40x6mm, locking arrengement and painting with two coats synthewtic enamel painting over a coat of the red oxide primer including excavation and earth work in any type of soil complete all as specified and directed.

Material and labour for for demolition of old broken / usnv valve pit and construction masonary valve chamber size 90 X 90 X 90 cm (Internal dimension) in repair with 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) sub base of floor, 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in floor finished even and smooth without using extra cement, one brick thick wall in cm 1:4 using old size sub class 'B' bricks and plastering internally and externally upto 150mm below GL 15 mm thick with cement mortar (1:4) and MS sheet cover not less than 6 mm thick with angle iron frame size 40x40x6mm, locking arrengement and painting with two coats synthewtic enamel painting over a coat of the red oxide primer including excavation and earth work in any type of soil complete all as specified and directed.

M & L for fixing in replacement MCCB, 4P, suitable for 440 Volts, 400 Amps, 36KA, Ics=100% ICU with adjustable type, fixing to the existing panel board matching with the existing slots, including any alteration required and with extention links properly connected to the bus bar complete all as specified and as directed.

All as per item no 129.00 here in before but for 250 Amp , 4P , 36 KA , Ics=100% Icu

All as per item no 129.00 here in before but for 200 Amp , 4P , 36 KA , Ics=100% Icu

aAll as per item no 129.00 here in before but for 160 Amp , 4P , 36 KA , Ics=100% Icu

M&L for replacement of DOL starter , three phase, 415 Volt , 50 Hz relay rating upto 16 Amps suitable for pumpsets upto 7.5 HP capacity in sheet metal enclsoure of IP-54 Protection as in repairs complete all as specified and as directed.

Supply and fix in repair starter suitable for centrifugal pump of capacity 5.5 KW/7.5 HP , suitable for operating on 3 phase AC supply 415 Volts, comprising of inbuilt by-pass contractor, soft start/soft stop/adjustable current limit , essential motor protection against overload single phasing, phase sequence reversal, abnormality in supply, unbalanced current, thermostator protection through PTC, excess start time setting, PC interface and with necessary protection of start by means of contractor/relay etc. The starter shall have MCCB 63 Amp, 4 pole to control the incoming supply, transformer, under voltage protection device, over voltage protection device, semi conductor fuse, contactor, LED indicator for R/Y/B & ON/OFF indication, Amp Meter with CTs & voltmeter of suitable rating complete fixed in and including CRCA sheet 2.0 mm thick powder coated complete with fabrication work complete all as specified and directed.

Material & labour for cleaning away all grass vegetation, cutting of bushes and scapling shrubs bushes under growth roots and trees not exceeding 30 cm girth and removing rubbish inside the periphery of area of Pump houses/ Sewage tretment plant, around bore wells, around starter panel of borewells etc complete all as specified and directed. Note :- All types of tools and plant required for cleaning/ cutting will be arranged by the contractor without any extra cost.

Supply and spraying anti vegetation chemical liquid of 1ltrs bottle mixed with water as per direction of Engr in charge. Note:- Spray pump for spraying chemical will be arranged by the contractor without any extra cost.

M&L for replacement of sluice valve flanged & drilled holes type of size 300mm bore with high tensile S/S spindle duly ISI marked class PN 1.6 with jointing material and nut, bolt, washer complete incl dismandling of old u/s sluice valve all as directed.

M&L for replacement of sluice valve flanged & drilled holes type of size 150mm bore with high tensile S/S spindle duly ISI marked class PN 1.6 with jointing material and nut, bolt, washer complete incl dismandling of old u/s sluice valve all as directed.

M&L for replacement of sluice valve flanged & drilled holes type of size 100mm bore with high tensile S/S spindle duly ISI marked class PN 1.6 with jointing material and nut, bolt, washer complete incl dismandling of old u/s sluice valve all as directed.

M&L for replacement of sluice valve flanged & drilled holes type of size 80mm bore with high tensile S/S spindle duly ISI marked class PN 1.6 with jointing material and nut, bolt, washer complete incl dismandling of old u/s sluice valve all as directed.

M&L for replacement of gun metal gate valve, ISI marked of the 50mm bore of pipe complete all as specified and as directed.

M&L for replacement of gun metal gate valve, ISI marked of the 40mm bore of pipe complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamalled paint as per colour coding after scraping the old paint Painting to CI/MS/ borewell pipe line of any size 200 to 300mm dia including sluice valve complete all as specified and directed.

Material and labour for applying two coats of synthetic enamalled paint as per colour coding after scraping the old paint Painting to CI/MS/ borewell pipe line of any size 80 to 150 mm dia including sluice valve complete all as specified and directed.

Material and labour for applying two coats of synthetic enamalled paint as per colour coding after scraping the old paint Painting to Column Pipe vertical type connected to OHT/UG Sump , CI/MS type of any size 80 to 300 mm dia including sluice valve complete all as specified and directed. Note :- T&P like scuffolding , wire brush, painting brush , ladder, safety belt, safety rope etc for painting upto height of 21 mtr / depth upto 10 mtr of OHT/ UG Sump will be arranged by the contractor without any extra amount.

M & L in replacement old rusted angle iron , valve pit cover including locking arrangement, and construction of new pump & motor foundation , valve pit chamber , valve pit cover , locking arrange for valve pit etc by using angle iron and back plates fabricated from structural steel sections including nut bolts washers welding bending cold and hot drilling holes for bolts in any shape or size as indicate or directed and inclusive of one primer coat one under coat and one finishing coat of paint.

M&L for cleaning of internal and outer surface of valve chamber with wire brush to remove all the algae and prepare surface with complete white wash with two coat lime water inside/ outside valve pit chamber including two coat of black paint on top Cast Iron cover and black paint for sluice valve and CI/DI pipe inside chamber also marking arrow for direction of water flowing with writing name of area feeding in white paint complete all as specified and as directed.

M & L for Detecting leakage in Cast Iron Pressure Pipes of 200/250/300 mm bore in any location, any depth including necessary earthwork excavation and repairing and arresting leakage by providing S/S leak arrester and Jointing Material, Flanged Clamps, Nuts, Washers & Bolts etc. complete all as specified and as directed.

All as per item no 148.00 here in before but for 150 mm bore.

All as per item no 148.00 here in before but for 100 mm bore.

All as per item no 148.00 here in before but for 80 mm bore.

All as per item no 148.00 here in before but for50/40 mm bore. Note :- Repair material such as bend , tee, nipple, union of suitable size etc shall be included in the quoted rate. No extra amount paid to the contractor for the same.

M&L for replacement of Smart Water Level Controller with sensor integration via screw terminals with the on – field configuration for providing the option for Underground sump and overhead tank each. Indication for 5 sensor reading per tank each. Indication for 5 sensor reading per tank ( 0%, 25%, 50%, 75%, 100%).Display interface with 4.3”TFT LCD screen with 32bit microcontroller unit, fixed resolution 480 X 720 pixels. Operating Temperature for device - 20 to 70 Degree C. The controller must support I/O based controls over 8 Bit 8051 Base Microcontroller Unit with support for Buzzer/Alarm at 25% and 100% capacity to operate On/Off operations. Manual Override option to override the controls from Auto mode. The enclosure is made of ABS Material for IP protection. ( Dust and water resistance) complete all as specified and as directed.

Supply , installation and testing of Horizontal Magnetic Float switch with SS pipe for sensor mounting ( 5% Nos. Sensor )

supply and fixing of 7 core Copper Alloy Signal cable with weather proof rubber coating complete all as specified and as directed.

Supply and fixing in replacement LED type street light fitting pressure die cast aluminium housing(Heat sink)for effective thermal management, IP 66,Operating Voltage 140-270 Volts, PF (0.95), with Assemetric Lens Type-,Luminous Flux >5000Lm, Efficacy of LED > 130 Lm/W, inbuilt Surge Voltage Protection of luminaires 60 watt LED 5500 to 6500K complete fitting. Note :- Make of security light fitting and driver are of same company. Different make of both will not be accepted.

Supply and laying, in replacement, of LT underground cable XLPE insulated, inner PVC sheathed, galvanized steel strip armoured, PVC sheathed electric power cable with stranded compact aluminium conductor 1100 volts grade 25 Sq mm 4 core confirming to IS:7098 (Part-I) with latest amendements, suitable for earthed system laid in duct/trench/along pole etc . Note : 1. The cost of Aluminium thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, DWC protection pipe will be measured and paid separately under respective items.

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size75 mm outer dia and 61 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

Supply , installation and testing of Openwell Submersible Pump, 5 HP, Three Phase, 380-415 Volts, Size 65mm X 50mm,36 mtr head, 11.2 LPS discharge, fully copper winding complete including deposting old motor to MES stoe yard all as specified and as directed.

Boring of trench under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine for road crossing water supply tubing of any size complete all as specified and directed.

Material and labour for preparing old painted surface of panel board by cleaning removing of old paint by scratching with wire brush / sand paper etc and including denting of broken / rusted surface and applied two coat of synthetic surface enamel paint by spray painting outside surface of panel as existing colour of panel all as specified and directed.

M&L for galvanized iron light grade pipe 40 mm dia complete with all fittings fixed to wall or fixed on roof for lighting protection, jointed tested and commissioned complete all as specified and directed ISI marked.

S&F in replacement including taking out old unsv / burnt flat submersible copper conductor cable of size 6 Sqmm 3 core ,1100Volt , waterproof PVC insulated complete all as specified and as directed.

M&L in replacement of sub main wiring 2.5 Sqmm multi-strand (in Existing Conduit) PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 2.5 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

M&L in replacement of sub main wiring 6 Sqmm multi-strand PVC insulated copper conductor FRLS cable including PVC insulated copper conductor cable of size 6 Sqmm as cotinuous earth wire connecting to common earth including connections of cable with MCBs or bus bars complete all as specified and directed

Supply & Fix in replacement flood Light Luminaire 150 watt with .high power LED cool white, supply voltage 220/240/50 Hz, light engine driver base.pole adapter,pressure die cast polycarbonate,powder coated in IP 66 life of 50000 hrs.Incliding protection of O/C,S/C,O/V, over temperature and lightning protection inbuilt complete all as specified and directed.

Supply and fix ceiling fan complete with blades, down rods, and accessories, 230V , 1200 mm sweep min air delievry 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC ) complete including depositing old Ceiling fan to MES Store yard all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete including depositing old fan to MES store yard all as specified and as directed.

Supply and fix in replacement of recess / surface mounting LED ceiling light 2x2 environmental friently new generation aesthetically designed ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, LED luminaire suitable for armstrong / grid ceiling complete for low ceiling application 36W LED (2'x2') complete with electronic driver, suitable for operation on AC, single phase, 220V/230V,50Hz, including provision of three core flexible copper conductor PVC insulated 1100V grade cable connecting up ceiling rose to fitting terminal end and testing complete

Supply and fixing in replacement of LED tube light fitting with polycarbonate LED tube rod 20W 4 feet and 1 x 20 watt box type batten aluminum body with microwave motion technology and integrated electronic driver including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

pmv.enterprises (BID ID -3380211)

Sathyam engineering (BID ID -3379053)