REPAIR MAINT OF FLAME PROOF WIRING INCLUDING REPAIR MAINT REPLACEMENT OF LIGHT FITTING AND FIXTURES AND CONNECTED ITEMS IN TECH AREA AT AFS KANPUR

Amount

Taking down unserviceable MS conduit point wiring from existing place ( light fan, socket or power points) complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants holders etc and making good to disturbed surface to wall, floor etc to match with existing surface either by using same colour distemper, putti or white / colour wash all as required complete all as specified and directed.

Taking down main switch/changeover/AC box of any capacity including fixing accessories complete all as specified and directed.

M&L for flame proof concealed point wiring on wall and surface wiring on ceiling / roof /hanger with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces for one light, fan point controlled by one switch complete all as specified and directed. Note : Junction boxes sahll be measured separately

S&F in repair flame proof - weather proof switch socket & plug combined 16 A, 250 V (2P+Earth) with cable termination in LM 6 aluminium alloy housing complete all as specified and directed.

S&F in repair flame proof weather proof threaded type junction box LM 6 aluminium alloy 2 way complete including taking down old unserviceable complete all as specified and directed.

All as per item No 5.00 above but 3 way complete all as specified and directed.

All as per item No 5.00 above but 4 way complete all as specified and directed.

S&F in repair flame proof weather proof metallic hose conduit 3/4 " dia 300 mm long including taking down old unserviceable metallic hose conduit complete all as specified and directed.

All as per item No 8.00 above but 500 mm complete all as specified and directed.

S&F in repair flame proof double compression brass cable gland 3/4" dia complete with nipples including taking down old unserviceable fittings complete all as specified and directed.

S&F in repair flame proof weather proof main switch 32A TPN complete with fixing arrangement including taking down old unserviceable flame proof main switch complete all as specified and directed.

S&F in repair flame proof weather proof switch with cable termination in LM 6 aluminium alloy housing 16 Amp, 250 volts complete including taking down old unserviceable fittings complete all as specified and directed. Note for Srl item No 4 to 12:- Make : Bajaj/Sudhir/CG/Shyam switch gear Pvt Ltd.

S&F in repair double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with IP 54 Protection with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. Make : Legrand/L&T/C&S/ Havells

All as per item No 13.00 above but SPN 4 way complete all as specified and directed.

All as per item No 13.00 above but TPNL 4 way, 415 volts complete all as specified and directed.

S&F in repair sheet metal enclosure double door type for DB when MCBs & MCCB 100 (as incomer) to be used, TPNL, 4 ways, 415 V, IP 54 Protection with bus bar fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed.

S&F in repair testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

All as per item No 17.00 above but SP 40-63 Amps complete all as specified and directed.

All as per item No 17.00 above but SPN 16-32 Amps complete all as specified and directed.

All as per item No 17.00 above but SPN 40-63 Amps complete all as specified and directed.

All as per item No 17.00 above but TP 40-63 Amps complete all as specified and directed.

All as per item No 17.00 above but TPN 40-63 Amps complete all as specified and directed.

S&F in repair MCCB 125 Amps, 4 Pole, 415V, 25KA complete all as specified and directed. Note for Srl item No 13.00 to 23.00:- MCBs, MCCB & DBs shall be used of same make only

S&F in repair MCCB 160 Amps, 4 Pole, 415V, 25KA complete all as specified and directed. Note :- MCBs, MCCB & DBs shall be used of same make only

S&F in repair flame proof weather proof LED luminaire 2 X16/20W, epoxy finish with LM 6 aluminium housing , heat resistant borosilicate tubular glass held in two alluminium cups with inbuilt DRIVER accessories & LED tubelight including taking down old unserviceable light fittings complete all as specified and directed. Make: CROMPTON Cat Part No EXTN2LT8-16/20 or equivalent in Sudhir

S&F in repair Die cast aluminium alloy LM-6 Flame proof weather proof flood light fitting LED 120 watt, powder coated epoxy based light grey shade 631 as per IS : 5, 'O' ring endless Neoprene Rubber Gasket, heat resistant type clear toughened glass with two number cable entriy complete all as sepcified and directed. (Make Sudhir Cat Part No SAI/WG/3007 or equivalent in other make given in Appedix 'D' as approved by GE )

S&F in repair LED flood light fitting 40 watt LED Flame proof - weather proof well glass luminaire with LM 6 aluminium alloy lamp housing , heat resistant and tuffend glass, hings cover with neroprene gasket, painted MS bar guard, epoxy finish provided with internal flameproof control gear & fixing accesories with suitable driver including taking down old unserviceable light fittings complete all as specified and directed. Make: Crompton Cat No. FWL1315-40-CDL/CG or sudhir-cat part No-0151

S&F in repair control gear box (flame proof) epoxty finish LM6 aluminium alloy housing with accessories and three cable entries suitable fcr HPMV light fitting 1x250 watt including taking down old unserviceable gear box flame proof complete all as specified and directed. Make: Sudhir--CGB/A/13-bajaj BJFC-125MV CA

S&F in repair flamefroof well glass light fitting 125 W HPMV lamp with complete control gear assembly for fitting at any location & at any height complete all as specified and directed. Make - sudhir/shyam or equivalent as approved by GE.

S&F in repair LED aviation obstruction light fitting, red painted die-cast aluminium alloy housing , red coloured polycarbonate dome and accessores complete comprising of LED 300 TWIN including old unserviceable light fititings complete all as specified and directed. Make :BAJAJ/Shyam/Sudhir/CG

S&F in repair LED aviation obstruction light fitting, red painted die-cast aluminium alloy housing , red coloured polycarbonate dome and accessores complete comprising of LED 300 SINGLE including taking down old unserviceable light fittings complete all as specified and directed. Make : BAJAJ -Cat Part No BGAV 302 or Shyam/Sudhir/CG

S&F in repair LED Flame proof batten 1x16/20 Watt suitable for safe working in gas/vapour envirment with IP65 protection linked alongwith driver and all other accessories for installation including taking down old unserviceable light fittings complete all as specified and directed. Make - Sudhir/Shyam/CG

M&L for sub main wiring with two single core PVC-FRLS insulated unsheathed multistranded copper conductor cable of size 4 sqmm drawn in conduit with one single core 4 Sqmm PVC-FRLS insulated unsheathed multistranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note : (i) Two run of copper condutor cable and one run of earth copper conductor will be measured and paid as one unit length (ii) Conduit pipe and fitting will be measured and paid separately

All as per item No 33.00 above but with four single core 6 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and one single core 6 Sqmm PVC insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. Note : (i) Four single core cable and one run of earth copper conductor will be measured and paid as one unit length (ii) Conduit pipe and fitting will be measured and paid separately

S&F PVC insulated, 6 sqmm alluminium multistranded conductor sheathed, twin core flat cable in & incl PVC conduit medium grade 20mm dia complete burried in ground as per site requiremment including earth work & connection to existing system complete all as specified and directed. Note :Cost of Conduit pipe and cable are deemed to be included in the quoted rate

S&F in repair rigid stove enameled steel conduit ISI marked of size not less than 20 mm dia position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc including taking down old rusted MS conduit complete all as specified and directed.

All as per item No 36.00 above but 32mm dia stove enameled steel conduit ISI marked incl taking down old rusted MS conduit complete all as specified and directed.

Disconnecting & Taking down FLP ceiling fan,,Axial flow fan any type any size any sweep any make from any position at site transporating to MES store Yard & dismantling blades opening the stator and rotor of ceiling fan and providing new lubricating, grease in bearing/bushes, re-assembling, commissioning and testing complete & rehanging fan to site incl providing nuts, bolts, locking bolts, blades screws, split pin, rubber real, PVC connector, washers etc whereas required and refixing in position complete all as specified and directed. Note:- (i) All major rerpair such as replacement of Bush, bearing , condensor, shaft, connection wire , winding & painting will be measured & paid separately under S&F /M&L items here-in-after. (ii) Checking of burnt of winding shall be deemed including in this quoted rate.

S&F in replacement of ball bearing (No 6201, 6202 & 6203) suitable for ceiling fan 1200mm/1400mm suitable complete all as specified and directed.

S&F condenser with PVC clamp of 2.5 mfd complete all as specified and directed. Make:- Tibcon/GEC/EPCOS

S&F condenser with PVC clamp of 4 mfd complete all as specified and directed. Make:- Tibcon/GEC/EPCOS

M&L for removing of burnt winding from FLP ceiling fan stator of size 1200mm/1000mm sweep and rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to contractor's work shop and bringing back to store and testing complete all as specified and directed.

Disconnecting & taking down FLP exhaust fan any make any size from any position at site transporating to MES store Yard & dismantling blades opening the stator and rotor of fan and providing new lubricating, grease in bearing/bushes, reassembling, commissioning and testing complete & refixing fan to site incl providing nuts, bolts, locking bolts, blades screws, split pin, rubber reel, PVC connector, rubber pad, washers whereas required and refixing in position complete all as specified and directed. Note:- (i) All major rerpair such as replacement of Bush, bearing , condensor, shaft, connection wire, winding & painting will be measured & paid separately under M&L only items here-in-after. (ii) Checking of burnt winding of exhaust fan shall be deemed including in this quoted rate.

M&L for removing of burnt winding from exhaust fan450/600 MM fans rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete including transportation to work shop and bringing back to store and testing complete all as specified and directed.

M&L for making circular holes suitable for fixing of 18”/24" sweep Exhaust fans by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete all as specified and directed.

S&F in repair exhaust fan MS blade 12” to 15” as per existing complete all as specified and directed.

S&F in repair exhaust fan MS blade 18” to 24” as per existing complete all as specified and directed.

M&L in replacement for MS front frame suitable for mounting of stays of suitable for 18" exhaust fan made out of MS Sheet not less than 1.6mm thick painted with two coat of synthetic enamelled over a coat of red oxide primer complete with neccesarry fixing accessories such as nut, bolts washers etc & fixing to wall all as per existing complete all as specified and directed.

All as item No 48.00 above but suitable for 24" exhaust fan complete all as specified and directed.

M&L in replacement for circular / rectangular framed shutters suitable for FLP 18" exhaust fan made out of as per existing size and strength for shutter painted with two coat of synthetic enamelled over a coat of red oxide primer complete with neccesarry fixing accessories all as per existing complete all as specified and directed.

All as item No 50.00 above but suitable for 24" exhaust fan complete all as specified and directed.

Taking down flameproof HPSV / HPMV /HPMH/LED fittings,/ Flameproof tube light fittings/ bulkhead flameprrof fittings any location any capacity from any height any situation, repairs to the extent by removing connections from the system checking of unserviceable spare parts and serviceable parts ,replacement of unserviceable parts with new spares and testing complete, tightening the loose connection and made item functional, reassembling the fitting and re-fixing/ re-hanging the same after repair in existing location or other location (as directed) including replacement of three core proof copper cable of size 1 Sqmm and painting of MS Bracket and clamps with painting after cleaning with grey colour and tesing complete all as specified and directed. Note : Spares required for repair (except connection cable) shall be measured and paid separately as supply only items here-in-after and the cost of connection cable shall be deemed to be included in the quoted rates.

Supply only Copper ballast Metal Halide/HPSV 250 Watt complete all as specified and directed. Make: Philips/Wipro/Havells

Supply only Copper ballast Metal Halide/HPSV 400 Watt complete all as specified and directed. Make: Philips/Wipro/Havells

Supply only Copper ballast HPMV 400 Watt complete all as specified and directed. Make: Philips/Wipro/Havells

Supply only Copper ballast HPMV 250 Watt complete all as specified and directed. Make: Philips/Wipro/Havells

Supply only Lamp Metal Halide 250 Watt complete all as specified and directed. Make-Philips/Wipro/Havells

Supply only Lamp Metal Halide 400 Watt complete all as specified and directed. Make-Philips/Wipro/Havells

Supply only Lamp HPMV 400W complete all as specified and directed. Make-Philips/Wipro/Havells

Supply only Lamp HPMV 250W complete all as specified and directed. Make-Philips/Wipro/Havells

S&F in repair LED Building Security Light 110 watt of alumenium PDC housing glass coverwith IP 66 protection complete all as specified and directed. Make: Philips cat No BRP 410 LED 110 CW HE MR FG S2 PSU Gror equivalent in Havells/C&S

S&F in repair 60 watt LED flameproof wall glass in die cost alluminium with heat resistant to tonhened glass IP 65 protection for safe working in Gas/Vapour envirment CIMFR certificate desirable) alongwith driver and all other accessories complete all as specified and directed. Make: - Crompton FWL 135-60-CDL or equivalent in shayam/sudhir

Supply and laying or fixing or passing through pipe in replacement, commissioning and testing LT XLPE cable 1100 volts insulated , screened , PVC bedded galvanised steel strip or wire armoured heavy duty Power cable with aluminum conductor of cross sectional area 25 sqmm 3.5 core using stranded conductor complete all as specified and directed. Make - Havells/POLYCAB/GRANDLAY

All as per item No. 63.00 above but size 16 sqmm 4 core complete all as specified and directed.

M/s Sohanil Construction

A.B.Enterprises