Providing and Fixing of Contractor Block and other Electric components at various T Wells in Sector 5 Panchkula

24.5.1.6:- MISCELLANEOUS ITEMS 1.6. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 16 sqmm [Through Rate]

20.114.9:- Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in all respect. 9. 50 HP Motor [Through Rate]

20.10.3 :- Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 3. 150 mm i/d [Through Rate]

20.11.3 :- Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-incharge 3. 150 mm i/d [Through Rate]

20.84:- Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge [Through Rate]

NS Item:- Providing and Fixing of Contractor Block MNX 80 LandT Make as Per Satisfaction of Engineer-in-Charge and attesting on load

NS Item:- Hiring of Electronic Borewell Camera for videography 350’ deep borewell urgently required for internal photography complete in all respect to the entire satisfaction of Engineer-in-charge

NS Item:- Measurement of Discharge at Tubewell of 1 Hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plant complete in all respect (Note any damage to site and material is responsibility of the contractor)