REPAIR TO FIRING RANGE, OBSTACLE COURSE, TRAINING SHED CLOTH LINE POST AND OTHER CONNECTED WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Taking down cement plaster from brick work or stone masonary wall and on concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick rendering on brick work or concrete surface in cement mortar 1:4,surface finished even and fair complete all as specified and as directed.

M&L for 10mm thick rendering on brick work or concrete surfaces in cement mortar 1:6,surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade first quality(100% acrylic) of silver steak shade of asian paint over a coat of primer including preperation of surfaces of walls or column or pillars or RCC chajja and facia complete all as specified and as directed.

M&L for applying three coats of white wash on wall including preparation of plastered surface complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick work with old size fly ash bricks, straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble masonry, uncoursed , well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded , bedded and solidly hearted , built in cement mortar 1:6 except stone complete all as specified Note : Serviceable RR stones obtained from demolition shall be reused.

M&L for 15mm thick rendering in cement mortar 1:4 on stone masonry surface, surface finished even and fair complete all as specified and as directed.

M&L for flush pointing to random rubble masonry uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete not exceeding 15cm thick below or above ground level and removing the debris to a distance not exceeding 50m from site complete all as specified and as directed.

M&L for 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of hard standing/pathway complete all as specified and as directed

M&L for 40 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring over sub base including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed

S&F in repair 4 mm dia of wire plain mild steel wire galvanised class 3 in fencing/cloth lining duly PVC coated (as per sample) including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc complete all as specified and as directed. Note:- Each line of wire to be measured.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection, surface finished even and fair in alternate panel including filling of joints with admixture of bitumen and sand in proportion 1:3 complete all as specified and as directed.

Demolition stone slabs or tiles of any description and any thickness in floors including cement mortar bedding but not backing complete all as specified and as directed

M&L for Chequered colour cement concrete tiles 30cmx30cmx25mm thick , set jointed and pointed in neat cement slurry in floors/steps with grey cement and pigment including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 6.8 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface of size 300mm x 200mm x 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in colour cement to match over including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed.

Dismantling structural steel work including doors, gates , roof truss etc complete all as specified and as directed.

S&F for mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde-E-250 quality-B complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces of any description over 10 cm width or girth , not otherwise described complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preperation of old painted steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in ridges,roof covering/clading to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exceeding 50m from site complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab, set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and as directed.

S&F mild steel TMT bars 10 mm dia and over ,cut to length , bent to shape required, including cranking , bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Cutting and removing wild bushes/ vegetation including surface dressing around the firing range and depositing surplus soil/ rubbish exceeding 100m but not exceeding 500m distance complete all as specified and as directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and as directed.

Screening of excavated material so obtained from item No 33 above as per direction of Engineer-in-charge and deposting the shell to SO works in presence of Engineer-in-Charge as obtained during screening complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Supply only Sand filling under floors or in foundation including watering & consolidation complete all as specified and as directed.

Supply only approved saw dust (as per sample) complete all as specified and as directed.

Labour only for mixing of sand and saw dust in equal prortions and laying the same over the sloped portion of shooting range complete all as specified and as directed

SANJAYA KUMAR PALAI

SUBAL CHARAN PRADHAN

M/S JAGANNATH SASMAL

KAILASH SWAIN AND CONSTRUCTION

SAHADEV PALAI

BAIKUNTHA PARIDA