59/W/EDC II/SRE/2025-26

Detail of Work

Safely cartage of ST Pole 11 Mtr. Long & PCC poles 8.5 Mtr. Long from ESC, SRE/JE store to site of work including loading & unloading at both ends.

Safe cartage of ST Pole 13 Mtr. Long & PCC poles 11 Mtr. Long from ESC, SRE/JE store to site of work including loading & unloading at both ends.

Safely cartage of other complete line material (Except PCC /ST Poles/11KV & 33 KV XLPE Cable/ LT AB Cable) from ESC, SRE/ JE store to site of work including loading, unloading at both ends.

Safe cartage of 10/25/63/100 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends.

Safely Carriage of 33 KV/11 KV XLPE Cable of size 3X35/3x70/ 3X120/3x185/3x300 sq mm. sq. mm from ESC, SRE/ JE store to site of work including loading & unloading at both end

Safely Carriage of LT AB Cable of size 3x50+1x35+1x16/ 3x95+1x70+1x16/ 3x120+1x95+1x16 sq.mm. from ESC, SRE/ JE store to site of work including loading & unloading at both end

Safe cartage of 11KV/33 KV CT/PT Unit from ESC,SRE, to the site of work including loading & unloading at both ends.

Safe cartage of 11KV/33 KV Metering cubical from ESC,SRE, to the site of work including loading & unloading at both ends.

Safe cartage of 250 KVA T/F from ESC,SRE, to the site of work including loading & unloading at both ends.

Construction of plinth for installation of 250 KVA T/F of size 1.5x1.5x1.5 Mtr. made of 9" thick wall in all the four sides with 6" thick RCC top duly filled with sand & plastered 12 mm. thick in ratio 1:4 with cement & sand on outer surface of brick wall.

Safely installation of 250 KVA T/F on the Plinth with complete fittings including making HT connections and commissioning.

Wire mesh fencing of 250 KVA T/F size 2.5x2.5x2.5 mt. grouting making frame of MS angal 35x35x4 mm and fixing four no. MS strip size 25x5 mm at equal distance in between the frame and fixing square mesh 50 mm square in each frame the fencing should cover all side of T/F with providing 1 No. door size 6’x3’ with sitakni & Dandala.

Earthing of 250 KVA T/F (01 No. body & 01 No. neutral earthing) by boring of 60 ft. deep & fixing of 60 ft.G.I. Pipe 11/2” Dia ( Jindal class B ) and connecting with G.I. Strip of size 40X5 mm and G.I. wire. at bottom of G.I. pipe to the T/F providing of required charcoal & salt in the pipe.

Erection of single support on ST Pole 11 Mtr. Long & PCC poles 8.5 Mtr. Long with complete fitting of all accessories of 33 KV/11 KV/LT line properly

Erection of single support on ST Pole 13 Mtr. Long & PCC poles 11 Mtr. Long with complete fitting of all accessories of 33 KV/11 KV/LT line. Properly

Erection of double Pole on ST Pole 11 Mtr. Long & PCC poles 8.5 Mtr. Long with complete fitting with all accessories of 33 KV/11 KV line. Properly

Erection of double Pole on ST Pole 13 Mtr. Long & PCC poles 11 Mtr. Long with complete fitting with all accessories of 33 KV/11 KV line. properly

Fixing of 11 KV DO Fuse Set on D/P complete properly

Fixing of 11 KV TPMO on D/P complete properly

Providing of HDPE Pipe 160mm dia

Drilling of earth under Road crossing 1.5 mtr. Deep and laying of 2 No. Parreral HDPE pipe 160 mm dia on 0.5 meter distance by drill machine/JCB machine/ labour Properly.

Laying of 11KV/33 KV XLPE cable size up to 3X300 sq mm in the 2 No. Parreral HDPE pipe 160 mm dia on 0.5 meter distance.

Providing and fixing of Number plate with clamp on the each pole.

Providing and Fixing 11KV/33 KV Danger board with clamp nuts & bolts. for ST Poles made of 3mm thick foam sheet (8" X 6") with

Providing and fixing of GI barbed wire on the each pole.

Providing of Red oxide Paints (British/Asian/enamel paint)

Providing of Aluminum Paint (British/Asian/enamel paint)

Painting of ST poles 11 Mtr, SP-55 with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing/cleaning of surface as required for proper completion of work. and remaining by Aluminum paint including all channels/clamps etc.

Fixing of 11KV/33 KV stay rods by digging of pits in block of 600X600X300 mm. & with nozzling of stay wire 7/10 / 7/8 SWG and fitting the same on the pole.

Concreting of stay rod in ratio 1:4:8 with Ist class brick ballast with cement, sand.

Providing and Fixing of Stone Ped 300x300x75

Earthing of poles by earthing rod

Providing of All type MS Clamp for ST Pole/ PCC poles with nuts bolts made of new MS flat iron 50x5 mm.

Providing and Fixing LT shekel insulator of size 100x115mm

Providing and Fixing nuts & bolts of various sizes.

Providing and Fixing Suspention clamp with I- Hook

Providing and Fixing Dead end clamp with I- Hook

Providing and Fixing Piercing connector Diff. size.

Providing and Fixing PG Clamp Diff. size.

Providing of 1X16 sqmm Cable for connection of Distibution box.

Providing of 11 KV cable terminations kit out door & indoor of size 3X35/3x70/ 3X120/3x185/3x300 sq mm.

Providing of 33 KV cable terminations kit outdoor of size 3X120/3x185/3x300 sq mm.

Providing of G.I. Pipe 100mm 4'' dia Class B

Providing of G.I. Pipe 150mm 6'' dia Class B

Removal of old ACSR weasel/Rabbit/Dog conductor from the Existing 33 KV/11KV/ LT lines with making roll of conductor and shifting the same to ESC, SRE/J.E store including loading and unloading at both ends.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Weasel Conductor for 11KV/LT Line complete properly.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Rabbit Conductor for 11KV/LT Line complete properly.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Dog Conductor for 33KV/11KV/LT Line complete properly.

Removal of 10/25/63/100 KVA T/F from the existing D/P after opening HT & LT connection and shifting the T/F from the site to ESC, SRE/JE store with loading & unloading at both ends.

Safe installation of 10/25/63/100 KVA T/F on the double pole with complete fittings including making connections and commissioning.

Safely installation of 11KV/33 KV CT/PT Unit on the double pole with complete fittings including making connections and commissioning.

Safe installation of 11KV/33 KV Metering cubical in the room with complete fittings including making connections and commissioning.

Chemical Earthing of Metering cubical/ CT/PT Unit/ 63/100 KVA T/F and connecting with G.I. Strip of size 25X4 mm to the Metering cubical/ CT/PT Unit/63/100 KVA T/F Complete Properly.

Laying, lifting, Stringing, proper sagging 11 KV/33 KV AB cable of size 3x95+1x70/ 3x120+1x95 sq.mm. including fixing of all accessories.

Laying, lifting, Stringing, proper sagging LT AB cable of size 3x50+1x35+1x16/ 3x95+1x70+1x16/ 3x120+1x95+1x16 sq.mm. including fixing of all accessories.

Laying, lifting, stringing proper sagging of 11/33 KV XLPE cable 3X35/3x70/ 3X120/3x185/3x300 sq mm of including complete etc

Fixing, Making of 11 KV cable terminations kit out door & indoor of size 3X35/3x70/ 3X120/3x185/3x300 sq mm.

Fixing, Making of 33 KV cable terminations kit out door of size 3X120/3x185/3x300 sq mm.

Laying and making connections of LT PVC/XLPE cable 2x6/4x16/4x25/4x35/3.5x50/ 3.5x70 / 3.5x150/ sq.mm. from T/F to double pole (approx to 20 Mtr).

Fabrication charges of Angle & Channal

Fixing of Distibution box with clamp. 01 & 03 Phese

Providing & Fixing of SMC Fuse Box for T/F

Fixing of G.I. pipe 100mm 4'' dia/150mm 6'' dia 3.5 mtr. long at the both side of double pole.

Hanging of cable on D/P after Fixing of outdoor terminations kits work as per site condition with jumpring complete.

Concreting of ST poles SP-55, 11 Mtr. & SP-72, 13 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Dismantling of existing PCC/ST pole after opening of complete accessories Safely carrige from site to ESC SRE including loading & unloading at both ends.

Please Enable Macros to View BoQ information