Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L1 | Accepted-AOC ACCEPTED DUE TO LOWEST | |
| 2 | L2₹10.1 L+₹1,380 (0.14%)Rejected-Finance AT MAIN ROAD DANDAI PO PS DANDAI DIST GARHWA | LATEHAR | JHARKHAND | 822112 | L2 | Rejected-Finance REJECTED DUE TO NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹23,000
Closing Date
12 Mar 2021, 6:00 pmClosed
GE LEKHAPANI
GE LEKHAPANI, TINSUKIA, ASSAM
REPAIR AND DAY TO DAY MAINT OF SECURITY LIGHT, LIGHTNING CONDUCTOR ETC AT LEKHAPANI MIL STN UNDER GE LEKHAPANI
2021_MES_421746_1
8588/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
CLASS E CAT b(i)
4 documents required · 4 mandatory
₹500
Yes
GE Lekhapani
₹23,000
Yes
23 Mar 2021
12 Feb 2021
15 Mar 2021
12 Feb 2021
12 Mar 2021
26 Feb 2021
Amount
Dismantling & Taking down unserviceable street llight fittings of any type from poles/bldgs/structure diconnect cable connection or OH lines and dismantling from brackets for repair and replacement of burnt/worn out accessories where required, replacement of old unserviciable street light fitting with new fitting etc as required to make the light fitting functional (vehicle,ladder,tools & plants as required at site for repair/repalcement of light fitting functional shall be provided by the contractor at his own cost & arrangement all as directed by Engineer-in Charge including refixing in the same position. (Note: (i) Spares required will be paid and measured separately (ii) contractor will deposit new material to Engr -in-charge for accepetance & then material will issued by JE E/M based on assesement of complaints.
All as per item No 1 in above but without taking down the light fitting from its position & tightening the fitting rigidly in postion after necessary repair/replacement of spares parts all as specified & directed by Engineer-in Charge (Note: (i) Spares required will be paid and measured separately).
Taking down/Dismantling of post top lantern fitting of LED lamp fittilng of capacity retro CFL light fitting of any type from Gates/GI poles etc. for repair and replacemnt of burnt/worn out accessories for carrying out of repair or removing from site all as directed.
Supply and fix for post top lantern fittings of capacity 25W LED light fitting make Havells or equivalent of Crompton/Philips/Bajaj.
M&L for street lilght bracket made out of GI tubing medium grade upto 1.5 mtr long 32mm dia including bending welding as required and making holes lncluding provision of flat iron clamps of flat size 50x6mm (02 Nos) wilth nut bolts and washers suitable for fixing on steel tubular poles/PCC poles including removal of old unserviceable brackets all as directed
Supply and fixing thermo plastic cable terminal box of size 167x125x82mm including terminals with locking arrangments including necessary mounting arrangement of any steel tubular /RCC poles with suitable size of clamps nuts bolts washer etc. fixed with poles including one single pole MCB of capacity 6-32A and PVC connector for cable termination Make HENSAL including removal of old unserviceable plastic cable terminal box all as directed all as directed
Supply and fixing of 1.5 sqmm cable with aluminum conductor of whether proof flat twin core cable for street light including taking up old UNSV cable complete all as specified and directed by Engineer-in-Charge .
Supply and lay cable XLPE insulated heavy duty electric cable wilth aluminium conductor multistranded 1100 volt grade of size 6 sqmm 2 core including taking out old unserviceable cable.
All as per item No 8 above but 10 sqmm 2 core
Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 meter in depth for taking out/for laying underground cables/poles etc. and getting out any type soil all as directed
Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm
Removing excavated soil into distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point all as directed
Supply and spreading fine river sand in trenches for cushioning of underground cable all as directed by Engr in Charge at site Note : only punned thickness shall be measured for payment purpose all as directed
Supply and lay fly ash bricks for cable preotection old size bricks
Supply & fix GI pipe light grade 40mm bore laid in trench or fixed on pole/wall with fixing arrangement or cable protection or fixing post top lamp etc including taking up old UNSV GI pipe complete all as specified and directed by Engineer-in-Charge. all as directed .
Supply and fix LED street light in aluminium PDC housing toughned front glass cover with IP 66 protection of capacity 45 W of make: havells or its equivalent Make philips/Bajaj/Crompton/surya.
Supply and fix LED flood light with die cast aluminium housing toughned front glass cover with IP 66 protection of capacity 70 W of make: Havells or its equivalent Make philips/Bajaj/Crompton/Surya.
Supply and fix LED flood light with die cast aluminium housing toughned front glass cover with IP 65 protection of capacity 120 W of make: havells or its equivalent Make Crompton,/philips/Crompton/Surya.
M&L for preparation surface of old painted pole and painting with one coat of aluminium paint on MS swaged pole including pole numbering to be written with white paint on 5" dia black back ground complete all as specified and directed by Engr in Charge
Supply and fix astronomical/digital timer switch 110-240V C/O 2 mode including all necessary electrical connection in LT PANEL including taking down U/S timer switch all as specified and directed by Engr in charge Model cat No TDA43110 of make indoasian or equivalent
Cross arms bracing supports clamps and back plate fabricated from structural steel sections including nuts bolts washers welding bending cold or hot drilling holes for bolts in any shape and size as indicated or directed and inclusive of one primer coat as under coat and one finishing coat of paint including dismantling cross arms of MS channel or angle sections etc complete all as directed
Supply and fix driver of LED fitting of existing make including taking down U/S driver of capacity 45 W watt complete all as specified and directed by Engineer-in-Charge .
Supply and fix driver of LED fitting of existing make including taking down U/S driver of capacity 70 W watt complete all as specified and directed by Engineer-in-Charge .
Supply and fix driver of LED fitting of existing make including taking down U/S driver of capacity 100 W watt complete all as specified and directed by Engineer-in-Charge .
Supply and fix driver of LED fitting of existing make including taking down U/S driver of capacity 25 W watt complete all as specified and directed by Engineer-in-Charge .
Supply & fix timelite distribution board of capacity 32A, 3 pole with digital time switch with necessary mounting arrangement including taking down U/S panel complete all as specified and directed by Engineer-in-Charge of E790indoasian or equivalent of Havells,L&T etc
S & F 3 pole MCB of capacity 40 A with breaking capacity of 10KA including taking down U/S MCB complete all as specified and directed by Engineer-in-Charge of make: Indoasian,Havells & L&T.
S & F triple pole contactor of capacity 40A of coil voltage of 24V AC including taking down U/S contactor complete all as specified and directed by Engineer-in-Charge of make: Indoasian,Havells & L&T
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.
Boring of holes under road, pavement, hard standing by trenchless technology technique for 50-100 mm dia pipe .
Taking down old unserviceable Switch fuse unit and supply and fixing switch fuse unit 32 Amp single pole and neutral switch fuse unit with rewirable porcelein fuse unit with side handle and in sheet inclosure Make Havells or equivalent in Standard/L&T all as directed by Engr-in-Charge.
Supply & fixing rigid steel conduit of size 20 mm dia on poles for cable protection.
ms singh construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .