Stock storage under JS Division Jubbal in Tehsil Jubbal District shimla HP SH Providing and Fixing CGI sheet roofing Destempering Painting and repair work in store building at Paccapatter

Excavation in foundation, trenches etc.in earth work, lift upto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15cm layers, when required, into plinths, sides of foundations, etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres in pick jumper work.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand :6graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation & plimnth.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.

Vertical surface such as walls ( Any thickness) including attached pillasters, buttresses, plinth & string courses.

Providing and laying cement concrete 1:2:4 (1cement: 2 sand :4graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in In foundation and plinth.

15mm thick cement plaster in single coat on fair side of brick/concrate/stone walls for interior plastering up to floor two level including arises internal rounded angle chamters and/or rounded angle not exceeding 80mm in girth and finished even and smooth. In cement mortar 1:3.

Providing corrugated G.I. Sheet roofing fixed with gal vanised iron J. or L. hooks bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers filled with white lead complate excluding the cost of purlins refters and trusses 0.63mm thick sheet.

Applying primming coat over new steel & other matel surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foregin matter land scoured with wire brushes fine steel wool scrapers and paper complate. With readymixed priming paint brushing red oxide/zinc oxide chrome.)

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to give an even shade i/c cleaning the surface of all dirt and other foregin matter. ( Enamel white paint)

Supplying & Fixing glass panes with putty and nails including and the like including attached pillasters, buttress, plinth and string courses and the like.