GE/CHM-15/2022-2023 REPAIR AND MAINT OF BLDGS OF WCLU 42 MVH KOI SPORTS COMPLEX STN HQ CHM 867 AT COY STN WKSP DDGSI PNR COY UNDER AGE B/R I AT CHANDIMANDIR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for, including truss, all as directed.

Demolition of lime concrete unreinforced in sunken portion of tiolet not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish complete all as specified & directed .

Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed.

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, all as specified & directed by Engineer-in-charge.

Taking up or down 15mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc., including removal from site to store/for re-use or for credit, complete all as specified and directed.

All as per item No.12 hereinbefore but for 20mm bore

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material n.exc 1.5 km complete all as specified and directed.

Dismantling any type (corrugated, semicorrugated, etc) AC sheets in roof coverings including ridges. complete all as directed .

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Taking down steel rolling shutters, push and pull type, any area, complete all as specified and directed.

Hard core of broken bricks of gauge of guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius, in half brick thick walls built in cement mortar 1:4, complete all as specified & directed.

15mm thick rendering in cement mortar 1:6 on other than fair faces of brick walls and finished even and smooth without using extra cement ,all as specified & directed.

15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished fair and even without using extra cement ,all as specified & directed.

10mm thick rendering in Cement and Sand mortar 1:3 over brick work or concrete surfaces finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position , all as specified & directed.

15mm thick plaster in cement mortar 1:3 mixed with WPC on fair faces of brick wall or on concrete surfaces in sunken portion of toilet and finishing the surface even and smooth without using extra cement, all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only.

Rendering 15mm thick plaster in cement mortar 1:4 mixed on brick wall or on concrete surfaces including dubbing coat if required on internal and external faces of parapet on roof top, RCC facia, RCC parapet wall, cornices, ceiling and finishing the surface even and smooth without using extra cement at height exceeding 6 metre but not exceeding 12 metre and applying 2 Coats cement base paint over a coat of white wash including taking down old plaster and removal of debris upto a distance of 1.50KM and providing necessary form work and scaffolding as per site requirement and carriage of all material all as specified and directed by Engineer-in-charge.

Supply only Integral waterproofing compound, all as specified.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified & directed by Engineer-in-charge.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer, preparatory to distempering complete, all as specified.

Three coats of white wash on wall surfaces including preparation of new surfaces complete all as specified and directed

Three coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed

Two coats of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed

Preparation of old decorated plastered or unplastered surfaces of walls including cornices , pilasters etc , applying two coats of oil bound distemper complete all as specified and directed.

Preparing previously decorated wall surfaces and applying a coat of cement base paint complete all as specified & directed by Engineer-in-charge.

Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Applying one coat of synthetic enameled paint on old steel and iron surfaces over 10 cm width or girth including preparation of surfaces complete all as specified & directed.

Preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Reinforced cement concrete (1:1.5:3), nominal mix, type A-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately

High strength deformed bar TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Form work to, chullah hoods, chajjas, troughs and similar items including edges and similar items including edges for fair finished surface of concrete flat complete all as specified and directed.

Precast cement concrete (reinforced) 1:1.5:3 nominal mix, type A-1 using 20mm graded crushed stone aggregate in shelves, lintel band and similar works including setting in cement mortar 1:4 Complete all as specified and directed NOTE : Reinforcement will be measured and paid separately.

Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 ,complete all as specified and directed.

Non skid, first quality ceramic coloured tiles (joint free), 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 ,complete all as specified and directed.

Glazed coloured ceramic tiles in vertical surface 350mm x 250mm x7mm / 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 ,complete all as specified and directed.

Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed

Coloured vitrified ceramic tiles (dark shade / double charged/ ultracharged) 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.42 Sqm but n.exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 ,complete all as specified and directed

Mild steel framed work as in doors or gates etc of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O and fixed at site completeall as specified and directed.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.

Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

Flush shutters 25mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.

Flush shutters 30mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.

2nd class hardwood boarding 20mm thick, planed one side and butt joints, fixed with nails in shelves, Partitions and shelves of built-in cupboards, fixed as in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified & directed.

Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.

Glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.

Supply and fix, as in repair, steel window, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.

All as per serial item No 59 hereinbefore but without glazing bar.

Taking down and Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Refixing shutter in same opening of aluminium shuttter exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates (wall thickness of aluminium section not less than 2mm) including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.

Powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium partition/ door /window/ventilator shutters made of aluminium sections (wall thickness of aluminium section not less than 2mm) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and panels shall be measured & paid separately under respective items as "Supply only" . Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.

5mm thick tinted sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed.

100mm size 4 Levers, brass, mortice Lock, vertical type , fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Double action floor spring of size 10"x6.75"x2.5", hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty, fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg , fixed in repairs, complete all as specified and directed.

100mm size, butt hinges, medium weight, cold rolled mild steel fixed to PVC / wooden chowkhats fixed complete all as specified & directed.

150mm aluminum anodized barrel tower bolts (ISI Marked) of extruded section, complete all as specifie

150 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed.

Aluminum alloy, anodized, sliding door bolt (ISI Marked),250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.

150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.

10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts, fixed in repairs, complete all as specified & directed by Engineer-in-charge.

PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc , fixed as in repair complete all as specified & directed by Engineer-in-charge.

3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, complete all as specified and directed.

4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.

Cast iron traps 'P' or 'S' suitable for 100mm bore cast iron pipe, fixed as in repair, complete all as specified & directed by Engineer-in-charge.

15mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on cooking platform, counter slab etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:6 including cutting / rounding of edges where requried complete all as specified and directed.

All as per serial item No 81 hereinbefore but on vertical surfacs as on skirting complete over and including 15mm thick scree bed in cement mortar 1:4 .

18 to 20mm thick Baroda green marble stone slabs, width and length as per site requirement (single piece), best quality machine cut and granite polished to be fixed on window cill, cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old stone slab and removal of debris where requried complete all as specified and directed.

Machine cut Kota Stone Slab flooring, 15-18mm thick, best quality (minimum size 55cm x 55cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.

Machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified.

CI floor trap 75mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) , fixed as in repair complete all as specified and directed.

Fancy type bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms), fixed as in repairs complete all as specified and directed.

100mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

75mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

All as per item No. 90 hereinbefore but except GI pipe 15mm bore

Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

All as per item No. 92 hereinbefore but except GI pipe 20mm bore

Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gm) for 25mm bore pipe, fixed as in repairs complete all as specified and directed.

25mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs,complete all as specified and directed.

Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) for 15mm bore pipe fixed as in repairs complete all as specified and directed.

Grating doom 140mm dia of PTMT (Minimum weight 50gms) fixed as in repair complete all as specified & directed by Engineer-in-charge.

Stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions , fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Wash hand basin, vitreous china, flat back , white of size 550X400mm, fixed on and including MS angle bracket 450mm long of size 35x35x5mm ,embeded in wall with PCC 1:2:4 , fixed in repairs, complete all as specified and directed.

Viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t ,complete all as specified & directed by Engineer-in-Charge

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc, including taking down old sheets, complete all as specified & directed by Engineer-in-charge.

Gypsum Board 12mm thick in ceiling on and including standard GI snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in padding over roof, mixed with water proofing compound, finished fair and even without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)

Rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces and finishing the surface even and fair without using extra cement, all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions , complete all as specified & directed.

40mm thick brick tiles laid on 15mm thick bedding layer in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement ,complete all as specified and directed.

All as per serial item No 111 here-in-before but except tiles

15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.

500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm bore PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair ,complete all as specified and directed

110mm bore PVC (SWR) bend any radius with access door complete all as specified and directed

PVC cover suitable for water storage tank capacity exc 500 ltrs but n.exc 1000 ltrs, including necessary tightening with screw etc, fixed in repaoirs, complete all as specified and directed.

32mm/40mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc, fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Wash down water closet pan (one piece), Pedestal pattern, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set, fixed as in repair, complete all as specified and directed.

Vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover fixed in repair complete all as specified and directed.

Angular stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions, fixed in repairs, complete all as specified & directed by Engineer-in-charge.

Bib taps, 15mm bore,fancy type, short body with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified.

Fancy type tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws, fixed in repair complete all as specified & directed by Engineer-in-charge.

18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails after taking out/dismantling existing damaged board complete all as specified and directed .

12mm thick pre laminated particle board (ISI Marked), exterior grade, pre laminated both side with decorative choice lamination and other side balancing white lamination, fixed with beading to aluminium frame work as in panel of shutter / built in locker after taking out old board, complete all as specified and directed .

Steel rolling shutters (1mm thickness of lath), without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull type with ball bearing including a shop coat of red oxide primer, complete all as specified and directed

Factory made coloured non skid porcelain tiles, heavy duty, exterior grade of size 300mm x 300mm x 9-10mm thick (Endura from Johnson or equivalent as approved) , set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6, including taking out old tile, complete all as specified and directed.

Factory made coloured chequered cement concrete tiles 300mm x 300mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6, including taking out old tile, complete all as specified and directed.

Sand filling under floors or in foundation, including watering and consolidation, all as specifed.

Factory made pre polished coloured rubber moulded Interlocking paver block, with white cement and pigment to match the shade of block, design as approved, any shape and size, conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, including dismantling of old paver block and removal of debris ,complete all as specified and directed

Factory made pre polished rubber moulded Interlocking paver block, with grey cement and no pigment, design as approved, any shape and size, conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, including dismantling of old paver block and removal of debris ,complete all as specified and directed

Factory made pre polished rubber moulded Interlocking paver block, with grey cement and no pigment, design as approved, any shape and size, conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, including dismantling of old paver block and removal of debris ,complete all as specified and directed

M/s Krishan Aggarwal

aggarwal contractors and engineers

Satyadev Builders

Gunjan and Gunjan Associates

Sanjeev Sehgal Contractor

Standard Const. Co.

BANSAL BUILDERS