Providing Street Light and Shifting of HT, LT Lines and DTC, Streetlights and allied electrical services work on road and over bridge from Ajni Railway Station Chowk to Medical Chowk Road, Nagpur

SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF ARCHITECTURAL 10M HEIGHT PALM TREE DESIGN POLE - Section : 10M Palm Tree Design Lighting Pole - Total height: 10 meters - Made from high-tensile GI sheet (Top Dia: 265mm, Bottom Dia: 558mm) - Central steel pipe: Dia 265mm - Possibly with FRP exterior with natural uneven trunk look. Palm Leaf Design - 6 Nos. decorative pipes (Dia: 60mm) welded around the 265mm pipe to form palm leaves - Lighting Fixture Support : - 2 nos. MS pipe bracket welded to pole for street lighting fixture mounting; 1 no. MS pipe bracket welded to pole for flexible linear light washer luminaire mounting; ZHAGA Book 18 receptacle-compatible; Fully compatible with CNODE Zhaga 18 w.r.t. electrical, thermal, optical and mechanical.- Base & Foundation : Provided with steel base plate of suitable size,To be anchored using appropriate foundation bolts in RCC foundation. Junction Box : Inbuilt at base with flush door Includes: 1 No. 32A Heavy Duty Stud-type connector & 3 No. 6A SP MCB. Surface Finish : Shot blasted before painting for better adhesion - 3-layer protective coating (Min. 100 microns): - 1st layer: Etch Primer - 2nd layer: Epoxy Primer - 3rd layer: PU Paint in custom Metallic Grey - General Requirements - All poles shall be manufactured in accordance with relevant BIS/IEC standards. - Detailed design drawings, structural calculations, and material test certificates must be submitted for approval prior to manufacturing.- Aesthetic appearance must match the approved architectural design provided by the project consultant/authority.

Supply, installation, testing and commissioning of High-Performance Flexible Linear Wallwash Luminaire (50W/M) comprising max. 24 cylindrical PDC aluminium LED modules/meter, each sealed with IK05-rated tempered glass. Optical & Electrical Performance: Max. 2W/module; ≥112.5 lm/module; ≥2000 lm/m; ≥40 lm/W - CRI ≥80, THD <10%, SDCM <5 - 24V DC constant voltage driver (non-integral) - Temp range: 0°C–50°C; L70 ≥50,000 hrs @ 35°C Construction & Optics: - Silicone-integrated moulding with aluminium shell - Module pitch: ≤45mm (±10%), Clear PMMA lens; 30° beam standard.- No exposed wiring; powder-coated housing (as per specified RAL) Control & Color: DMX512 compatible with integrated addressing (4 pixels/m), No external decoder. RGBW output with 16M color combinations. Surface mountable ; Custom L-brackets by contractor as per site ; 1 bracket min. per 4 modules, IP66, IK05 minimum, Supports optional antiglare hoods. Dimensions (Strictly Enforced): Length: 1000mm (±15mm) - Dia: 40mm (±10%) | Width: 48–50mm (±10%) | Height: 38–40mm (±10%) Mandatory Documents (to accompany Bid): Technical Datasheet with RoHS Declaration- LM79 (NABL), BIS Certificate. (NABL, exact model/wattage/CCT) Standards Compliance: - IEC 60598, IS 10322-5, IS 16103/05/06/07, IEC 61000-4-5 (Surge), EN 55015 (EMC)

Supply, installation, testing and commossioning of Driver. Specifications: Output: 75W, 24V DC Constant Voltage; Input: 170–270V AC (Indian conditions) - BIS Approved (IS 15885 Part 2/Sec 13 or equivalent). Electrical Protections: PF >0.9; Built-in: Short-circuit, Overload ; Integrated 6KV Surge Protection; External 20KV SPD (factory-installed); BIS Approved (IS 15885 Part 2/Sec 13 or equivalent) - Weatherproof IP66-rated metallic/plastic box ; UV-stabilized, corrosion-resistant, outdoor-ready; Dust-tight and protected against water jets; Cable glands for input/output termination. Designed for RGBW wallwash luminaires with DMX512 Maintenance-free operation; Operating Temp: -10°C to +50°C or better Weatherproof IP66-rated metallic/plastic box; UV-stabilized, corrosion-resistant, outdoor-ready; Dust-tight and protected against water jets; Designed for RGBW wallwash luminaires with DMX512; Operating Temp: -10°C to +50°C or better.

Supply, installation, testing and commissioning of 120 W LED Street Light; Luminaire to be powder-coated, pressure die-cast aluminium alloy (non-corrosive) with optimized heat sink fins. UV-stabilized, injection-moulded polycarbonate (PC) lens cum cover. Thermally isolated optical and driver compartments for effective heat management. IP66 rating for both compartments; certification from Govt./NABL-approved lab required. Windage area ≤ 0.06 m² Impact resistance: IK08 (housing), IK09 (optical). System efficacy ≥150 LPW at Luminaire Level. ZHAGA Book 18 receptacle-compatible.Side pole mounting for 50–60 mm OD poles. IP66-rated driver compartment with tool-free access. Driver should be field-replaceable. Driver: Universal input voltage: 90–300V AC, 50Hz ±3%. DALI D4i compatible, efficiency >90%. Protections: Over/under voltage, overload, thermal, short-circuit, reverse polarity. Internal surge protection: 4kV L-L, 6kV L-N (IEC 61000-4-5); external SPD: 20kV. Auto recovery; withstands 440V AC for 8 hrs. IP66 or higher rating. Power factor ≥0.95, THD <10%. Fully compatible with CNODE Zhaga 18 w.r.t. electrical, thermal, optical and mechanical. Light Engine: - Metal Core PCB (Al 5052), thermal conductivity >2 W/mK. - LED junction temperature <85°C; test report from NABL lab required. - Operating temp: -10°C to +55°C; RH: 10–95%.

Supply, Installation, Testing, and Commissioning (SITC) of a Smart Streetlight Control System using LMS-OLC Version 1.10, including communication infrastructure and software integration. The solution shall consist of a web-based Lighting Management System (LMS) and Zhaga-compliant Outdoor Lamp Controllers (OLCs) with integrated IoT connectivity, enabling remote monitoring, control, configuration, and analytics of streetlights, along with seamless integration with city-level command and control centres. Lighting Management System (LMS) • Platform: Web-based SaaS, multi-user, mobile/desktop accessible, multilingual UI. • Integration: Open RESTful APIs; TALQ 2.0 certified. • Asset Management: Hierarchical structure (Project > Organisation > Group); asset tagging and bulk profile control. • Map Integration: Google Maps + Street View; automatic address tagging. • Lighting Control: Unlimited static/dynamic profiles (AstroClock, ALS, time-based, motion-based). • Driver Support: 0-10V, 1-10V, DALI, DALI 2.0, D4i, SR-ready. For Detailed Wording of Item Please REfer Tender Booklet-----and Speciifcation

Supplying and erecting switch disconnector fuse (SDF) 415V, 40A, with enclosure, triple pole and neutral link AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC - DIN type fuse switch, insulation voltage 1000 V with rotary handle for ON / OFF operation (without HRC fuse)

Supplying & erecting HRC fuse cartridge 415V, 32A.

Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWGsheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.

Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982. (Reaffirmed in 2020).