Special repair to 06 x toilet blocks of OTM Accn Bldg No P-459 and P-460 under GE West Jalandhar Cantt

Amount

Demolition of cement concrete at any position and removing surplus spoil/debris out of Defence Land complete all as specified and directed

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

M&L for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring complete all as specified and directed

M&L for appliying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing coating on the entire surface of sunken portion all as specified

M&L for 15mm thick cement screed in CM 1:3 admixed with integral waterproofing compound FOSROC's complast X 421 IC @ 130ml per bagFOSROC's Nito bond AR cement slurry/STP No 1 liquid @ 200ml per bag of complete all as specified.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified.

M&L for non skid joint free ceramic coloured tiles of size exc 0.11 Sqm and not exc 0.18 Sqm, 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and removing serviceable tiles to store and rubbish off the premises all as specified

M&L for coloured glazed tiles of size not less than 300mm x 200mm and 6-7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10 mm thick rendering in CM 1:4, all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Land complete all as specified and directed

M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified

M&L for 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface with and including water proofing compound finished even and smooth in any condition and at any position and at any height complete all as specified. Note : WPC @ 3 % by weight of cement shall be used as per manufacturer's instructions and rate is included in above item.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified

S&F squatting pan WC orrisa pattern size 580 x 440 mm white with and including integral foor rest with P or S trap incl provn of lime concrete bedding incl breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specifed.

S&F vitreous china urinal bowl type complete incl providing and fixing plugs bedding urinal against wall in CM(1:2) securing urinal to plugs with and incl 60cm long brass screws, pointing aroung urinal back in cement incl and fixing flush pipe, grating with coupling and union for discharge complete all as specified.

Dismantling of CI pipe 100 mm dia including fitting/fixtures/jointing materials, jointed in cement mortar/ lead joint etc and taking off from floor/wall/ceiling etc complete all as specified.

Dismantling of CI pipe 75 mm dia pipe, including fitting/fixtures/jointing materials, jointed in cement mortar/lead joint etc and taking off from wall/floor/ceiling etc complete all as specified.

S&F 100 mm dia cast iron pipes in any length with or with out ears, with cement joints/ lead joints, laid in floor/wall/ceiling etc complete all as specified.

S&F 75mm dia cast iron pipes in any length with or with out ears, with cement joints/ lead joints, laid in floor/wall/ceiling etc complete all as specified.

S&F bends of 100mm dimnishing pieces or tapers ( larger bore measured) complete all as specified.

S&F bends of 75mm dimnishing pieces or tapers ( larger bore measured) complete all as specified.

M&L cast iron "P" trap 100mm dia with grating including jointing to waste pipe fixed in cement contrete type B-1 (1:2:4) complete all as specified.

M&L Cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement contrete type B-1 (1:2:4) complete all as specified.

Extra over 100 mm bore cast iron pipes and fitted if lead joint is provided in lieu of cement joint complete all as specified.

Extra over 75 mm bore cast iron pipes and fitted if lead joint is provided in lieu of cement joint complete all as specified.

S&F cast Iron Tee 75 mm Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

S&F cast Iron Tee 100 mm Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

S&F 150mm dia SGSW gully traps setting and jointing with cement mortar all as specified and directed

S&F stack clamps out of 50mmx 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall and roof for 75/100mm pipe all as specified

S&F CP grating 125mm dia all as specified and directed by Engr-in-Charge

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified.

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F medium grade steel water tubing, 25 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push type with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified.

S&F in repair CP waste coupling suitable for existing WHB all as specified

S&F in repairs waste pipe suitable for existing WHB complete all as specified.

S&F in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified.

S&F 15mm angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe or for unions and fixed in repairs complete all as specified.

S&F in repair bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified.

All as per item no 40 above but in short body fancy type complete fixed in repairs.

S&F Stop valve 15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed in repair complete all as specified.

S&F in repair brass chromium plated shower rose of 75 mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified.

S&F in repair brass chromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified.

S&F in repair soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified .

S&F in repair acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed

S & F 2000 ltr rotational moulded polyethylene water storage tank double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified fixed in repairs complete all as specified.

S&F in repair 20mm bore ball brass valve, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified.

S&F 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both endsfor both iron pipe or for unions complete all as specified.

Taking down chowkats or frame area not exc. 1.5 sq m each with shutters (without taking off shutters from the fames)

Taking down chowkats or frame area exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames)

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and as per manufacturer's instructions.

S&F factory made solid panel PVC door 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 10 mm thick PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & as per manufacturer's instructions.

S&F butt hinges medium weight, stainless steel , bright polished 100 mm size for fixing PVC door shutter complete all as specified.

S&F PTMT handles 150 mm size fixed with PVC door shutters screws complete all as specified

S&F PTMT tower bolts, 200mm long fixed with PVC door shutters screwed complete all as specified and directed

S&F peg set of six hooks made of stainless steel all as direcred and specified

S&F steel ventilator, fixed type with glazing bars complete all as specified

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work or water tanks and similar work conforming to Fe-290 gde E-165 all as specified and directed.

M&L for 3 mm thick plain figured glass, pin headed type and glazing with in oil putty in square n exc .5 sqm in each pane complete all as specified

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified

M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed in repair complete all as specified

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) removing surplus spoil out of defence land complete all as specified.

M&L cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) complete all as specified

M & L for cleaning top surface of cement concrete by wire brushing and applying 15 mm thick cement plaster in CM1:3 with waterproofing compound on roof finished the surface fair and even all as specified .

Supply only integral water proofing compound conforming to IS- 2645 complete all as specified and directed.

M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/sqm over a coat of primer @ 0.3 litre per Sqm all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non woven fabric ( wt. Not less than 150 gms/sqm) laid on bitumen coated surface by forced application complete all as specified.

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on mud phuskha all as specified.

All as per Item No 73 above but except brick tiles (cleaning of old reused brick tiles shall be included) complete all as specified

M&L flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etc complete all as specified.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.

All as per Item No 78 above but except bricks(cleaning of old reused bricks shall be included)

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed by Engr -in-charge.

M&L for prepration of old surfaces of ceiling and applying two coat of white (lime) wash on ceiling complete all as specified and directed by Engr -in-charge.

M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying three coats of white wash complete all as specified and directed by Engr -in-charge.

M&L for prepration of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coats of white wash complete all as specified and directed by Engr -in-charge.

M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat complete all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applied two coat of cement base paint over one coat of primer complete all as specified and directed by Engr -in-charge.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engr -in-charge.

M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down old unserviceable sub main wiring 6/4.00 Sqmm 1100 volts grade two runs of single core PVC insulated, unsheathed copper conductor, including taking down casing/capping/PVC conduit complete all as specified and directed

Taking down main switch/DB complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including sunken type pressed steel terminal boxes and plastic laminated white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per item No. 93 above but one 3 pin socket outlet 5 amps on independent board with other switches, complete all as specified and directed. .

All as per item No. 93 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Supply and fix switch piano flush button type, 5 Amps, 230V AC, single pole, one way complete all as specified and directed

Supply and fix socket out let multi purpose 5 pin 5 Amp flush type 230/250 volts complete all as specified.

Supply and fix socket combination multi purpose 6 pin 15 Amp flush type 230/250 volts complete all as specified.

Supply and fix batton holder insulated body with 5 watt LED bulb complete all as specified.

Material & labour for submain wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated multistranded copper conductor cable (FRLS) drawn through and including 20 mm dia. PVC rigid concealed conduit and conduit accessories and 4 sqmm PVC insulated copper wire for continuous earth continuity conductor all as specified and directed by Engr-in-charge. Note : Two run of 4 sqmm cable and one run of 4 sqmm along with 20mm dia PVC conduit will be measured as one unit.

Supply & fix in replacement LED light fitting 22W retrofit including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 22 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMLINEPLUSBS22WLED865SPCSS or equivalent as mentioned in appendix 'B'

Supply and fix ceiling rose surface bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Supply and fix DB, double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar complete all as specified and directed.

Supply & fix MCB SP, 6 to 32 amp, 240 Volts complete all as specified and directed.

Supply & fix isolator SPN, 40 amps, 240 Volts complete all as specified and directed.

Supply & fix in replacement LED street light fitting 20W including LED lamp pressure die cast aluminium IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed incl bracket and fixing clamps. Make :Havells cat part No.ENDURAPEARLSL20WLED757SASYTOPC or equivalent as mentioned in appendix 'B'

Supply and fixing exhaust fans heavy duty AC single phase 230/240 volts, 1450 RPM of size 300mm sweep with louvre and flexible cord from ceiling rose to exhaust fan complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

AAY KAY ENGINEERS

HYLAND CONSTRUCTION COMPANY

M/S RAJESH CONSTRUCTION COMPANY

M/s Nirmal Singh and Co.

BHARAT ENTERPRISES

Motorway Constructions