Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹73.3 L+₹13.7 L (23.0%)Rejected-AOC 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹83.6 L+₹24.0 L (40.3%)Rejected-AOC | L3 | Rejected-AOC Not being L1 |
| Sl No | Description | Qty | Unit | GEE EMM ASSOCIATES L1 | M/s MAHAJAN CONSTRUCTION CO. L3 | M/s Vijay Construction Co. L2 |
|---|---|---|---|---|---|---|
| 1.00 | Material and labour for complete removal of existing treatment from wall Old plastered/unplastered surface complete all as specified and directed. | 47,000 | SQM | 10 ₹4,70,000 | 22 ₹10,34,000 | 5 ₹2,35,000 Lowest |
| 2.00 | Material and labour for applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed. | 15,000 | SQM | 14 ₹2,10,000 Lowest | 20 ₹3,00,000 | 22 ₹3,30,000 |
| 3.00 | Material and labour for applying one coat of acrylic waterbased exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed. | 32,000 | SQM | 19 ₹6,08,000 Lowest | 30 ₹9,60,000 | 38 ₹12,16,000 |
| 4.00 | Material and labour for applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over priming coat with fully automatic airless spray machine of 3000 PSI +/- 20%. Complete all as specified and directed.
Note:- Minimum gap between subsequent coats shall be 6-8 hours. | 15,000 | SQM | 22 ₹3,30,000 Lowest | 30 ₹4,50,000 | 40 ₹6,00,000 |
| 5.00 | Material and labour for Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of 3000 PSI +/- 20%. Complete all as specified and directed.
Note:- Minimum gap between subsequent coats shall be 6-8 hours. | 32,000 | SQM | 69 ₹22,08,000 Lowest | 100 ₹32,00,000 | 80 ₹25,60,000 |
| 6.00 | Material and labour for Applying 2 mm thick exterior wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed.
Note- Entire spalashes in floor shall be cleaned immediately after completion of periodical services. | 15,000 | SQM | 42 ₹6,30,000 | 25 ₹3,75,000 Lowest | 25 ₹3,75,000 Lowest |
| 7.00 | Material and labour for Prepration of old surfaces of walls, pillars cornices surfaces includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed. | 500 | SQM | 10 ₹5,000 | 15 ₹7,500 | 8 ₹4,000 Lowest |
| 8.00 | Material and labour for Preparation of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed. | 500 | SQM | 10 ₹5,000 Lowest | 15 ₹7,500 | 10 ₹5,000 Lowest |
| 9.00 | Material and labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. | 300 | SQM | 15 ₹4,500 Lowest | 20 ₹6,000 | 20 ₹6,000 |
| 10.00 | Material and labour for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat applied under Srl item No 9 above complete all as specified and directed. | 300 | SQM | 14 ₹4,200 Lowest | 15 ₹4,500 | 20 ₹6,000 |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
16 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Amritsar
HQ CWE Amritsar
SMART PERIODICAL SERVICES TO CERTAIN OTM ACCN OF STN HQ INF BDE AREA MD ACCN OF PALERAM ENCLAVE AREA OF AGE BR I UNDER GE NAMS
2025_MES_741479_1
83058/E8
Open Tender
Civil Works
Item Rate
180 days
GE NAMS
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE NAMS
₹1.6 L
Yes
5 Feb 2026
25 Nov 2025
23 Dec 2025
25 Nov 2025
16 Dec 2025
9 Dec 2025
Amount
Material and labour for complete removal of existing treatment from wall Old plastered/unplastered surface complete all as specified and directed.
Material and labour for applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed.
Material and labour for applying one coat of acrylic waterbased exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. Complete all as specified and directed.
Material and labour for applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over priming coat with fully automatic airless spray machine of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for Finishing walls with water based anti-algal 100% acrylic smooth exterior emulsion having silicon additives in two coats @ 1.79 ltr / 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of 3000 PSI +/- 20%. Complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for Applying 2 mm thick exterior wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed. Note- Entire spalashes in floor shall be cleaned immediately after completion of periodical services.
Material and labour for Prepration of old surfaces of walls, pillars cornices surfaces includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and directed.
Material and labour for Preparation of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treating oil and greasy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed.
Material and labour for applying one coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.
Material and labour for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat applied under Srl item No 9 above complete all as specified and directed.
Material and labour for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.
Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : old plaster surface (one coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamel paint on wooden surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.
All as per Ser item No 13 but one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.
Material and labour for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete work, kerb stone and finishing the surface even and smooth (without using extra cement) incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, incl WPC @ 200ML per 50kg cement bag or as manufacture instruction complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items
Material and labour for 15mm thick cement plaster in cement mortar (1:6) on brick or concrete surfaces on other than fair surface and finishing the surface even and smooth (without using extra cement) etc. incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, complete all as specified and directed
Material and labour for 5 mm thick cement plaster in cement motar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc incl taking down plaster of walls scrubbing down with water and dispose off debries where directed, complete all as specified and directed
Supply only water proofing compound complete all as specified and directed
Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars over a coat of alkali resistant primer etc complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for applying three coat of white wash on ceiling surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for damproofing to wall with two component Acrylic polym,er cementitious water proof elastomeric coating and apply with paint brush as first coat then applying second layer mix by brush to entire surface of container covering 0.6- 0.75 Sqm/ Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note : Quoted rate shall be deemed to be inclusive of materials all labour, tools and plants, scaffolding and working upto height 6 meter etc. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, with chicken wire mesh and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of finished to match with existing surfaces complete all as specified and directed. Note:- Minimum gap between subsequent coats shall be 6-8 hours.
M/s Vijay Construction Co. (BID ID -3505615)
M/s MAHAJAN CONSTRUCTION CO. (BID ID -3505883)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
BOQ_830272.xls
BOQ • 0.31 MB
83058Tender.pdf
Tender Documents • 0.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .