CERTAIN BR REPAIRS WORKS AS JOINERY FLOORING PLUMBING CONNECTED BR WORKS FOR OFFRS AND JCOS OR MD ACCN IN THE AREA OF AGE BR I UNDER GE NORTH DELHI CANTT 10

Amount

Dismantling of brick tiles or terracing tiles,single layer on roof complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof)

M&L for 40mm thick brick tiles laid on mud mortar and joints,grouted flush in cement mortar (1:3) mixed with 5%of crued oil by wt of cement on mud phuska roof complete all as specified and directed.

All as per item no 3 here-in-before above but except tiles.

M&L for 80mm thick average consolidated thickness mud phuska of flat roof incl 25mm thick mud plaster & 3mm thick leeping plaster. Complete all All as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing.

Dismantling of plain or corrugated steel sheeting, any gauge, thicness, including nainital or similar pattern roof covering.

Dismantling of Battens for tiles, shingles etc of any size including tiltling fillets spaced n.exc 15 cm.

Demolition of existing textile coverings including frames ( if any ) and cover fillets ( measured flat and not girthed )

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each.

Refixing of shutters of any description exc 1 sqm but n.exc 2 sqm each in the same opening.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys, scrubbing down with water etc.

Dismantling and taking down of water storage tank capacity exc 250 Ltrs and n.exc 500 Ltrs of PVC , steel or RCC.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs,cleaning, etc and hoistng if requried reconnecting and refixing in position.(cleaning reparing,etc measured separately) capacity exc 500 & n. exc 1000ltrs.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20mm bore pipe.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15 mm bore pipe.

M&L for Indian type WC including demolittion of cement concrete (unreinforced) in sunken portion of WC, area n.exc 1.20 sqm including removing of unserviceable materials and Providing half brick surrounding walls , rendering 10 mm thick plaster in cement mortar ( 1:4 ) with WPC and laying lean concrete in bottom portion of WC and then applying 3mm thick APP membrane over bitumen primer surface of walls and bottom portion of WC with torch method , provide 32 mm dia GI tubing as spout of sunken portion 0.60 m long of approved quality , By filling Khanger / cinder and lean concrete, supply and fix vitreous china Squatting pan "Orissa pattern" size 580x440mm white, with integral foot rest & ' P' traps & jointing new 100 mm dia CI pipe with lead joints to WC ( excluding flushing cistern & flush pipe ) . Testing of sunken portion will be carried out by filling water for 24 Hrs in sunken area complete in all respect as specified and directed . Note : - ( i ) WPC, floor and dado tiles will be measured and paid separately. (ii) Guarantee for water proofing for 10 years shall be given by contractor and Rs. 1000/- for each job shall be kept from final bill and shall be released after satisfactory completion from the certified date of completion.

Demolition of cement concrete( unreinforced ) in ground floors and pavings n.exc 15 cm thicness ( below of above ground level )

M&L for Roof tiles Mangalore pattern, interlocing at side joints, laid dry. Complete all as specified and directed.

All as per item No-22 here-in-before but except tiles.

S&F for 0.63 mm thick, Galvanised, corrugated mild steel sheeting with two corrugations side laps fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

All as per item No-24 here-in-before but except sheeting.

M&L for 2 nd class hardwood in clean sawn battens at 15 cm centre to centre sectional area exc 5 & n.exc 15 sq.cm .

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light and taking down old false ceiling complete all as specified and directed.

M&L for brick work in CM (1:6) straight or curved on plan exc 6.0m mean radius and sub class 'B' bricks complete all as specified and directed.

All as per item No-28 here-in-before but except bricks

M&L for Brick work with sub-class "B' Bricks straight or curved on plan to any radius in half brick thick wall built in CM ( 14) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.

S/F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified and directed.

S & F butt hinges 100mm size Medium weight cold rolled, mild steel, fixed complete all as specified.

S & F butt hinges 75 mm size Medium weight cold rolled, mild steel, fixed complete all as specified.

M&L for 40 mm thick, flush shutters solid core construction, with block board core and plywood face panel , commercial type on both sides, complete all as specified and directed.

S&F for 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) complete of shutters all as specified and directed.

S&F for 35mm thick 2nd class HW, plain framed, panelled shutter factory made (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on other side and as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per product Drg given on Sl. Page No. 176 to 186 (as applicable) of SSR Part-II 2020

S&F for 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs, aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F aluminium alloy handles anodised, fabricated type of size 150 mm.

S&F for Mild Steel 1.60 mm thick plain black sheet in steel gates and similar works , cut to size , holes punched; including round headed screws, clout nails or rivets and fixed to steel framing and welding seams , including bending or turning up,, mitred angles etc as required complete all as specified and directed.

S&F in repairs steel windows in ahmedabad section with double shutter on single frame side hung including projecting type hinges with steel handle, peg stay complete with glazing bars ( one side glazed shutter and other side fly proof shutter with and including 15x3 mm flat iron frame for fly proof shutter ).

S&F in repairs steel ventilators with top hung shutters including hinges, steel peg stay complete , all as specified and directed by Engr-in-charge.

S & F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40mm Fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. complete all as specified and directed.

S&F for sheet glass ordinary quality, 3mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane.

S & F for 3 mm thick figured glass pin head type and glazing with oil putty n exc 0.5 Sqm in each pane.

M&L for PCC (1:2:4 ) type B-1 ( using 20 mm graded stone aggregate ) as in bed blocks for fixing hold fasts of doos and windows frame complete all as specified and directed by engr-in-charge.

M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. Complete all as specifed and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.Complete all as specifed and directed.

M/L for PCC 1:4:8, type D2, (using 40 mm graded aggregate) 75 mm thick as in sub floor, Sub base, floor complete all as specified & directed.

M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on dust cushioning, laid dry complete all as specified & directed.

Supply only Sand dust for interlocking tiles. Complete all as specified.

M&L for Chequered cement concrete tiles25x25cmx 22 mm thick, set and jointed in neat cement slurry in floor and pointed with grey cement and pigment including 20mm thick screed bed in CM 1:6 complete all as specified & directed.

M/L for PCC 1:3:6, type C1 (using 20mm gradeed aggregate), 75mm thick fair finished surfaces .as in plinth protection/ foot path complete all as specified & directed..

M/L for PCC 1:2:4, type B1, 40mm thick, fair finished surfaces .as in flooring (using 20 mm graded stone aggregate) complete all as specified and directed.

M/L for PCC 1:2:4, type B1, 25 mm thick as bencing,roof kerb, bends and coping levelling course/padding to maintaing the slop of tiles (using 20 mm graded stone aggregate) complete all as specified and directed.

M&L for glass dividing strips , 3mm thick and width of strip 38mm, inserted in position to confirm design

M&L for rendering 15 mm thick in CM 1:4 on fair faces of bricks work or concrete surfaces finished even and smooth using extra cement mixed with WPC (WPC is to be measured and paid separartely).

M&L for rendering 15 mm thick in CM 1:6 on unfair faces of bricks work or concrete surfaces finished even and smooth without using extra cement .

Supply only integral water proofing compound.

Dismantling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding & provision guniting pressure 2.2 to 2.5 Kg/Sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40mm including stripping floating withj wooden strippers for proper dimension control necessary form work & scaffolding up to four storey complete surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3S as per manufacture instruction cleaning & removing of waste material etc as directed at site ( Welded mesh & addl reinforcement if required measured and paid separetly) Note: Only steel scaffolding is allowed and rate included in above item)

M&L for preparation of newly plastered surface on walls and applying 2 coat of OBD over a one coat of primer complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified.

M&L for preparation of new plastered surfaces of ceilling and applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified .

Supply and fixing for rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity hoisted and fixed in position and connecting up pipes securing access covers etc all as specified and directed

S&F for ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm each) for 20 mm bore of pipe.

M&L for 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

M&L for 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

Refixing of old steel tubing and connections in new or old position (to walls/floors/ceiling etc) of size 15 mm bore

Refixing of old steel tubing and connections in new or old position (to walls/floors/ceiling etc) of size 20 mm bore

S&F for 75 mm bore PVC (SWR) Pipes single socked in length, or with rubber ring joints, fixed to walls or in any position including taking down old damaged pipes complete all as specified and directed.

S&F for PVC(SWR) bends plain 75mm bore complete all as specifed and directed.

M&L for Non skid, coloured ceramic joint free tiles 7 to 8 mm thick 400 x 400mm size of approved colour, set, jointed neat in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

S&F for non skid ceramic tiles 300X300X 7 mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 for bed layer complete all as specifed and directed.

M & L for Non skid coloured ceramic tiles 7 to 8mm thick 400 x 400mm size of approved colour as in skirting/dado,etc including 10mm thick bacing coat in CM (1:4) to receive tiles ,set and jointed in neat cement slurry and pointed in coloured cement to match including triangular filleting in CM 1:4 on top complete all as specified & directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-Charge.

M&L for 10 mm thick rendering as backing coat on brick /concrete surfaces in cement mortar 1:4 rough finished on vertical surfaces to receive tiles etc. complete all as specified.

M&L for Vitrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repairs, 19 mm thick particle boards, medium density, flat pressed, single layer type or three layer type, BWR type adhesive, fixed with beading/screws to timer frame/metal frame as in shutters, shelving to cup boards etc complete all as specified and directed.

S&F in repairs 15mm bore dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs, vitreous china Squatting pan "Orissa pattern" size 580x440xmm white, with integral foot rest. Complete all as specified and directed.

Supply only, PVC valvelen, syphonic acbon type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connection complete all as specified and directed.

M&L for cast iron Nahani trap 75mm out let dia meter with grating incluiding jointing to waste pipe fixed in repair in cement concrete type B-1 (1:2:4) .

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm including CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by Engineer in charge.

M&L for mild steel clamps, bands straps, supports or stays for soil waste pipe & rain water pipes including fixing clamps with coach screws etc complete all as spd and directed.

Dismantling for cast iron pipe , jointed in cement mortar of any dia upto 100mm. all as specified.

S&F for cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches on infloors complete all as specified and directed.

All as per srl item No-91 here-in-before but 75mm bore pipes ditto.

S&F for cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F for Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door. Complete all as specified and directed.

S&F for Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door. Complete all as specified and directed.

S/F in repairs, for 15mm bore stop cock fancy type, chromium plated with long shank and cup (concealed type) Complete all as specified and directed.

S&F in repair bib tap, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. Complete all as specified and directed.

M&L for marble makrana white work 18-20 mm thick (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. with screed bed or bedding layer of mortar 20mm thick in cement mortar 1:6 laying floor finishes . Complete all as specified and directed.

Moulding of kota /marble stone full round complete all as specified.

S&F in repairs, 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified.

S&F in repair stainless steel plate rack of size 75 cm X 60 cm X 25 cm made of 1 mm thick sheets and as approved by GE.

S&F in repairs, sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs,washers and wastes coupling including bedding in cement mortar to dwarf wall, neccessary masonary work or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm . complete all as specified and directed.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia including brackets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 square metre each complete , all as specified and directed by Engineer-in Charge.

S&F for rolled section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates incluidng welding 3 Nos MS butt hinges 100mm & 01 No 50mm complete (Butt hinges shall be measured and paid for separately). complete all as specified and directed.

S&F for 19mm thick ISI Marked, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand & cup boards etc complete all as specified and directed .

S&F for extra over rates of block board or veneered partical board for external 6mm thick teak wood beading all around complete all as specified and directed .

S&Fin repairs steel windows with side hung shutter with openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long and steel peg stay all as applicable, complete with glazing bars, glass/gauge, dovetailed or welded complete all as specified and directed. (Glass/Gauge shall be measured and paid separately).

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F for continuous M S CP (piano type) hinges 30mm flap (when opened ), bright finish or electrogalvanised complete all as specified.

S&F for mild steel, pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified.

M&L for 2nd class hard wood, small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.

S&F in repairs 150mm ordinary rat tail rod pattern spring including roller and roller plate (mild steel). complete all as specified and directed..

S&F for mild steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. complete all as specified and directed.

M&L for two coats of distemper oil emulsion on walls including preparation on old surfaces ,complete all as specified and directed. .

M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in fixing of hold fast complete all as specified.

M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for Rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

All as per Srl item No 82 here-in-before but on vertical surface as in skirting ,including 10 mm thick rendering in CM 1:3 even on fair faces of brick work complete all as specified and directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

S&F in repair galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

M&L for Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length.

S&F for rubber gasket for fixing glass pane all as specified.

S&F glass panes of plain sheet glass 5.50 mm thick of ordinary quality in square exc 0.50 sqm each pane all as specified.

S&F in repair 100 mm size butt hinges , extruded aluminum alloy complete all as specified and directed.

S&F in repair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg.

S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm X 44.45mmX2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.

S&F Anodised aluminumalloy powder coated stantard hollow section for door including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles(150mm) in each door etc and other accessories complete incl taking down old door etc complete all as specified and directed .

S&F Anodised aluminum alloy powder coated standerd hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels,5mm thick tinted glass, glazing clips joint cleats,rubber gassket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mmX44.50mmX1.60 mm thickness. (b) sliding window section (channel):-40mmX18mm of 1.20mm thickness with locking arrangemeny. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50 micron. (3) make for PVC sheet :- sintex,Rajshree,Tata.

Supply and fix in repairs vitreous china water closet Squatt Pattern ) " Orissa pattern " size 580 x 440 mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet including lime concrete bedding complete all as specified and directed ( Make HINDWARE / PARRYWARE / NEYCER/ CERA)

S&F in reapir hand shower (Helath faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (back flow preventor) (Make Jaquar, Cat No ALD 577). Complete all as specified.

S&F in reapir angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified..

M&L stainless steel plate rack made of 0.80 mm thick sheet of size 900X600X250 mm fixed to wall with suitable rawl plug all as directed.

S&F as in repairs bib tap 15mm bore, fancy type chromium plated complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm, complete all as specified and directed..

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity. complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified .

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern),white (including fixing bolts, flushing cistern & flush pipe) including black seat cover with necessary fittings all as specified and directed.

S&F in repair, 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 201355.00

P.H. construction

RASTOGI BUILDERS

AAYUSHI ENTERPRISES

Simran construction Company

SHYAM ENTERPRISES

The new hut furnitures