Supply of Open Zym Equipments In Municipal Area

DIMENSIONS: - 1060mm (Length) x 810mm (Width) x 1600mm. (Height). SAFE AREA:- 2.0 Meter x 1.8 Meter Air Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G.I. Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bending at the radius of 250mm. The Sleeve frame is of 100 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame. The bottom support of M.S. round plate of 0250mm & 10mm thick. The leg movement frame is of 32NB made from “B” Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from “B” Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class welded with M.S. round plate of 0250mm & 10mm thickness and 20mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes. Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. Closing Caps are made up of high quality reinforced Plastic material. A24 circlips are used for assembly. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S. made of SS 304 used on nylon cap mounted on pins to protect and pins from rain and dust.

General Information: Product Area: - 1.5 X 0.8 meter Safe Play Area: - 2.5 X 1.8 meter Technical Specification: 25 NB Galvanized pipe bend to form ring and spokes consists of 20 NB G.I. pipes the connect to each other of form a pair of wheels of FOREARM TWIRT. These wheels are mounted on both ends of 40 NB G.I. pipe bend with specially designed bearing housings and shaft assemblies. This bend pipe is fixed to main frame of 80 NB G.I. pipes. Handle is fixed over the pipe ring for free movement of wheels. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe bend closed by GI/HDPE caps for user safety against entrapment. Handle for rotating the ring fixed.

DIMENSIONS: - 1150mm (Length) x 1150mm (Width) x 1580mm (Height). SAFE AREA: - 02.1Mtr. Triple Twister made from “B” Class G.I. Galvanized (G.I.) Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The Center Pipe is of 80NB made from “B” Class G.I. pipe. The bottom support welded is of M.S. round plate of 0250mm & 10mm thick. The standing frame is of 32NB made from “B” Class G.I. pipe. The handle frame of triple twister is of 25mm NB made from “B” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. The standing plate is fitted on the frame made up of 0 80 NB GI. Pipe. M.S. Round Plate of size 0300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 0 35 mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Area - 1.8 x 0.8 mtr. Safe Area – 2.8 x 1.8 mtr. Height – 1.10 mtr. Providing & fixing of Cycle having its required Area (6’0” x 2’6”) and height of 3’6” Feet. The wheel of cycle should be made by 2” x 2” square pipe with wheel support of 2 nos. half round plate of thickness. The Handle & Centre support should be made by 1’6” x 1’6” Square pipe & handle should be made by 25mm ‘B’ class pipe for balancing the cycle. The seating arrangement should be supported by 5mm thick plate & the FRP seat of size (13” x 13”) to seat properly on the cycle. The mechanism of the paddle consist of 2 nos. 6305 heavy duty bearing of reputed make with shaft, solid bar & bush for smooth operation of the cycle.

*DIMENSIONS: -1840mm (Length) x 360mm (Width) x 1560mm. (Height). *SAFE AREA: - 2.8Mtr x 1.4Mtr. *Leg press equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100mm NB made from “B” Class G.I. pipe. *The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. *The bottom support of M.S. round plate of 0250mm & 10mm thick. *The remaining outer frame is of 32NB made from “B” Class G.I. pipe. *The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” Class welded with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. *Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. *The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. *The frame of footrests made up of 25NB “B” Class G.I. pipe. * Closing Caps are made up of high quality Fiber reinforced Plastic material. *To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness. *The pins used are made up of 025mm SAE 8620 bright material. *The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand (SKF/FAG). *High tensile steel with galvanized nut bolts are used for assembly. *The circlips used for assembly are of A24mm. *The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.

:- *DIMENSION: - 750 mm (Length) x 600 mm (Width) x 600 mm. (seating Height). *SAFE AREA: - 1.2 Mtr x 1Mtr. *Knee chair equipment made from “B” Class G.I. pipe of Different IDGI. IDGI stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *The center Pipe is of 100mm IDGI made from “B” Class G.I. Round Pipe. *The M.S. round plate is of 0250mm & 10mm thickness is welded at bottom. *Handle and Bottom sleeve pipe of 25 mm id *The back frame of the Seating & back rest is of 50 IDGI. *The handle frame of seating rest & Foot movement must be 25 mm IDGI. *Bearing should be 6302 reputed make only. *Closing Caps are made up of high quality Fiber reinforced Plastic material/ MS round cape. *The Pins used are made up of 0 35 mm SAE 8620 bright material. Suitable rubbers griping for handle and foot stand. *High tensile steel with galvanized nuts & bolts are used for assembly. *The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height). SAFE AREA: - 1.7 x 1.2Mtr. Cross trainer equipment made from “B” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of GI Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frames Pipe are of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of 0250mm & 10mm thick. The Handle Frame used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate or 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. To build structure bushes are used which are made from Z.S. seamless pipe of 60mm OD. With 5mm thickness. The footrests are made from Aluminum casing material of size 130mm X 310mm X 5mm thickness and mounted on M.S. Plate of Size 130mm x 310mm x 3mm thick. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright. The Bearings used are of “6007zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester of Ackzonoble or Berger Paints with 60 to 70 Micron assembly. A16, A 24 mm circlips are used for assembly. Bolt M8x16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

ABS Board - Product Area: - 1.6 X 0.8 mtr. Safe Play Area: - 2.6 X 1.8 mtr. The main frame of ABS BOARD is made up of 80 NB G.I. pipes with leg support structure. The back rest is fixed over 40 NB back rest frame. Back rest is made up of rectangular pipes of 50 X 25 X 3 mm thick. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe closed by GI/HDPE caps for user safety against entrapment. The powder coating done with Pure Polyester powders of Ackzonoble or Berger with 60 to 70 micron thickness. All the sharp edges and corner properly grinded to give smooth finishing.

Pommel Horse - DIMESIONS: - 2150mm (Length) x 800mm (Width) x 800mm. (Height). SAFE ARAE: - 5Mtr x 3.5Mtr. Pommel horse equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of GI Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frame of 80 NB and 50NB made from “B” Class G.I. pipe. The handle frame is of 32NB made from “B” Class G.I. pipe. 40mm x 40mm CRC square pipes frame is placed on the 25mm x 25mm x 3mm M.S. L Angle with 60 x 10 m thickness flat is used for support. Closing Caps are made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness.