Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.7 LAccepted-AOC VILL PO KARASA TEHSIL ROHRU DISTT SHIMLA HP | SHIMLA | HIMACHAL PRADESH | 170009 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹13.8 L+₹37,316.45 (2.78%)Rejected-Finance NA | L2 | Rejected-Finance L2 | |
| 3 | L3₹14.0 L+₹62,147.90 (4.63%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹11.7 L
EMD Value
₹23,000
Closing Date
17 Apr 2025, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
Providing Sewerage system to Saraswatinagar Hatkoti Tehsil Jubbal Distt Shimla HP SH C/O Sludge Drying Beds 2 Nos
2025_HPIPH_103450_1
JBL-SML-09-718
Open Tender
Civil Works
Item Rate
180 days
Sawra
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹23,000
5 Jun 2025
4 Apr 2025
17 Apr 2025
4 Apr 2025
17 Apr 2025
4 Apr 2025
Amount
Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited saturated soil stacking the excavated soil as per direction of Engineer in charge.
P/L cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) & curing complete in foundation & plinth as per direction of Engineer in charge.
Providing & laying cement conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work as per direction of Engineer in charge.
In Foundation & Base Slab
Wall (any thickness,but not less than 0.10 mtr thickness) attached pilasters, buttresses, plinth & string courses etc. from top of foundation level upto floor two level
Prov. & laying cement conc.1:2:4 (1cement: 2sand: 4graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work as per direction of Engineer in charge.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5 mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two level
Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pillasres buttresses,plinth & string courses and the like.
Suspended floor, roofs, landing & shelves & their support balconies, beams, girders, bressumers & cantilever upto floor two level.
Edges of slab/break in floor and walls upto 20 Cm wide
Providing & fixing C.I. Sluice valve with Stainless steel spindle and hand wheel complete in all respect as per direction of Engineer in charge. a) 80 mm dia
Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level.
Providing in RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement :3Sand) complete in all respect within all leads & lifts.
Providing and Laying filter Media
Ist Layer 150 mm thick Coarse Gravel 50-75mm
2nd Layer 150 mm thick fine Gravel 6-20 mm
Top Layer 300 mm thick Sand 0.50 to 0.75 mm
Provididng and fixing HDPE Pipe confirming to PE 80 PNB DN1600 IS 14333: 1996) in proper position by butt fusion jointing procedure including hydraulic testing as per relevent IS Code cmplete with in all material for jointing procuder like butt fusion welding machine with hydraulic jack . top loading clamp etc. pump and accessories for hydraulic testing and all labours as directed by Engineer-in-charge as confirming to IS 7634 (Part II) 2012 amended upto date) 150 mm dia
laying in trenches DI / GMS / MS Tubes (M class) tube fitting (Earth work in trenches to be measured & paid for separately) 80 mm Dia
Sushil Chauhan (BID ID -510616)
Balraj (BID ID -510618)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .