COMPREHENSIVE MAINTENANCE OF CERTAIN SERVANT QUARTERS COMMON STAIRS CASE AREA OF OMQ OTHER MISC WORKS IN SP AREA OF AGE BR I UNDER GE AF SUBROTO PARK DELHI CANTT 10

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm complete all as specified and directed by Engr-in-Charge.

All as per item 1 above but not exc 1.5 Sqm complete all as specified and as directed by Engr-in-Charge.

Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed by Engr-in-Charge.

S & F rolled mild steel framed work as in doors, chowkats or gates of angle or other section, grills confirming to Fe 410 - W, with gusset plates, rails braces, lugs etc., complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.

S&F Factory made wire gauzed i.e. panel will be of wire gauze PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes fixing in frame at site as per specification complete all as specified and as directed by Engr-in-Charge.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and as directed by Engr-in-Charge.

Factory made solid panel both side prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam sheets PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and stile and rails feathered at edeges, supplying & fixing in the frame at site as per specification & drawing complete and as directed by Engr-in-Charge.

Supply and fixing windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series). Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed by Engr-in-Charge.

S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F of 75 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed by Engr-in-Charge.

S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

Demolition to brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M & L for screed bedding 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of APP membrane finished even and fair using WPC complete all as specified and as directed by Engr-in-Charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatment complete all as specified and directed.:- (a) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminous oil based primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyester non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (c) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (d) Painting with two coats of water proofing paint with aluminium finish.

Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed by Engr-in-Charge.

M&L 15 mm thick cement mortar 1:6, on fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed by Engr-in-Charge.

M&L 15 mm thick cement mortar 1:4, on fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

S&F Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick Cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in sub base floor complete all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic tiles in vertical surface 300x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick in cm 1:4 complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed by Engr-in-Charge.

All as per item 31 above but 75 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed by Engr-in-Charge.

S&F 15mm bore CPVC pipe of pressure rating 10 Kg/Sqm , with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan “Orissa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, PVC ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and as directed by Engr-in-Charge.

Providing precast cement concrete louvers and jallies in repair , 35 mm thick ( measured solid) including all moulding but excluding frame type B-0 1:2:4 ( 12.5 mm graded stone aggregate) set in CM 1: 4 complete all as specified and directed by Engr-in-Charge.

S&F in repair Rotational moulded polyethylene 3 layer heat resistant water storage tanks in white colour (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity complete all as specified and directed by Engr-in-Charge.

S&F PTMT valve high pressure with ploythenic float and fly nut complete screwed for iron pipe or brass ferrule 20 mm dia complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or concrete surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of colour wash over a coat of lime wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment of surfaces by steel wire brushing, scraping down smoke soots, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall surface and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment of surfaces by steel wire brushing, scraping down smoke soots, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall surface and applying two coats of colour washing complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment of surfaces by steel wire brushing, scraping down smoke soots, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of ceiling and applying two coats of white washing complete all as specified and directed by Engr-in-Charge.

M&L for dismantling loose concrete cover of RCC slab, columns, beams, chajjas, balconies, stair case and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA rustoff 100 applied in two coats @ 0.15 Kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry including S&F welded fabric GI wire mesh, size not less than 75mmx75mm and 3.00 mm dia as reinforcement to concrete. After placing the additional reinforcement, all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allowed to dry. To this surface, apply chemical polyester admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of Cement and 2 parts of Ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sqcm by guniting machine and surfaces finished even and fair including necessary padding, shuttering/form work etc and finally applying 5 mm thick cement plaster in CM 1:3 complete all as specified and directed. . Note: (i) Where ever steel reinforcement required will be paid separately (ii) Work to be executed for upto two storey buildings and in Patch work.

M&L 75mm thick PCC 1:2:4 Type B2 (40mm graded aggregate) as in floor/ Path/ Plinth protection including necessary form work, surfaces finished even and fair without using extra cement incl making joints 10mm wide and upto full depth at every 3m and at each corner filling them with sand bitumen mastic complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove the debris complete all as specified and directed by Engr-in-Charge.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed by Engr-in-Charge.

Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough surface complete all as specified and directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 5 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work exc 5cm but n exc 10cm wide Roughed finished surface of concrete complete all as specified and directed by Engr-in-Charge.

M & L for 18 to 20 mm thick pre polished Udaipur green marble laid over 15mm thick 1:4 CM screed bed in cooking plateform, tread ,riser of stair case in one piece (upto 1.2m width) including polishing complete all as specified and as directed by Engineer-in-Charge.

M&L for Rounding to edges of stone slabs complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement in patch work of chhajja and ceiling incl supply and fixing of chicken wire mesh of dia 0.6mm mesh size 50mm incl taking down of plaster complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified and as directed by Engr-in-Charge.

M & L for Chequered cement concrete tiles grey cement with pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M& L for 80 mm thick, M-40 grade machine pressed rubber form moulded precast interlocking concrete paver block in any shape and size as approved confirming to IS 15658-2006 over sand cushion complete all as specified and as directed by Engr-in-Charge.

M& L for 60 mm thick, M-40 grade machine pressed rubber form moulded precast interlocking concrete paver block in any shape and size as approved confirming to IS 15658-2006 over sand cushion complete all as specified and as directed by Engr-in-Charge.

M&L for sand filling under floor incl spreading and levelling in layers n exc 25 cm thick complete alll as specified and as directed by Engr-in-Charge.

M/S MG GROUP

Ashish Sehgal and Co.

M/S PRADEEP ENTERPRISES