PMN/NIT/74/25-26/PMZP/PM,SL-09

Purba Medinipur Zilla Parishad

NIT No.- 74 of 2025-2026, Sl No.- 09

ABSTRACT COST FOR THE PROJECT

ITEM OF WORKS COST

A. GROUP - A Civil Work. Rs.

B. GROUP - B Sanitary & Plumbing Works. Rs.

C. GROUP - C Electrification Works. Rs.

Add : GST @ 18.00% Rs.

Add : Cess @ 1.00% Rs.

TOTAL TENDER AMOUNT OF THE PROJECT Rs.

Rupees Eleven Lakhs Ninety Seven Thousand Nine Hundred Forty Seven Only

District Engineer Additional Executive Officer

Purba Medinipur Zilla Parishad Purba Medinipur Zilla Parishad

Tender Inviting Authority Additional Executive Officer, Purba Medinipur Zilla Parishad

Contract No. NIT No.- 74 of 2025-2026, Sl No.- 09

GROUP - A : (Civil Work)

Sl. No. Brief Description of the Item of Works Total Qty. Unit Rate (Rs.) Words Amount (Rs.)

1 Earthwork in excavation in foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking………… (a) Depth of excavation not exceeding 1,500 mm. 40.26 m3 119.27

2 Earth work in filling in foundation trenches or plinth with good earth, in layers not………. 40.26 m3 Rupees Seventy Seven And Fifty Four Paise Only

3 Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) (b) (i) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth. 15.1 m3 379.82 Rupees Three Hundred Seventy Nine And Eighty Two Paise Only

4 Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 84 m2 10 Rupees Ten Only

5 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed…….. (B) Do - by fine sand. 0.999 m3 851.73 Rupees Eight Hundred Fifty One And Seventy Three Paise Only

6 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand…………… 0.999 m2 348 Rupees Three Hundred Forty Eight Only

7 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety a) In ground floor 0.000 m2 Rupees Five Thousand Six Hundred Eight And Seventy Four Paise Only

8 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and..………………………………… (f) 25 mm to 30 mm thick wooden shuttering with out staging 0.199 m2 205 Rupees Two Hundred Five Only

(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Above plinth with stagging 0.799 m2 324 Rupees Three Hundred Twenty Four Only

9 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 0.200 m2 24 Rupees Twenty Four Only

10 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.i) Pakur Variety……………. 0.000 m3 Rupees Six Thousand One Hundred Twenty Seven And Thirty Four Paise Only

11 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite………… (a) For works in foundation, basement and upto roof of ground floor/upto 4 m II. JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL Gr. Floor 0.999 MT Rupees Fifty Five Thousand One Hundred Fifty Four And Seventy Four Paise Only

12 Brick work with 1st class bricks in cement mortar (1:6) (A) In foundation and plinth. Wall above Foundation Beam up to Tie Beam 2side 0.000 m3 5198 Rupees Five Thousand One Hundred Ninety Eight Only

13 (B) In Superstructure 0.000 m3 5420 Rupees Five Thousand Four Hundred Twenty Only

14 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 0.000 m2 712 Rupees Seven Hundred Twelve Only

15 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local. At ground floor 0.999 m3 72954

16 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. At Ground Floor 4.2 m2 2968 Rupees Two Thousand Nine Hundred Sixty Eight Only

17 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 12 Nos. 25 Rupees Twenty Five Only

18 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm. 12 Nos. 43 Rupees Forty Three Only

19 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (ix) 300mm long x 10mm dia. bolt. 4 Nos. 99 Rupees Ninety Nine Only

20 Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iii) 300mm x 16mm dia. bolt. 2 Nos. 231 Rupees Two Hundred Thirty One Only

21 Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete. (ii) 225mm grip x 16mm dia rod x 38mm plate x 3.2mm thick. 4 Nos. 177 Rupees One Hundred Seventy Seven Only

22 Door Stopper (Brass) 4 Nos. 117 Rupees One Hundred Seventeen Only

23 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 29.85 m 279 Rupees Two Hundred Seventy Nine Only

24 PVC 26 Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and ther100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. 37 mm thick 9.765 m2 2287 Rupees Two Thousand Two Hundred Eighty Seven Only

25 (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii) Grill weighing above 16 Kg./sq.mtr and above 0.605 Qntl. 9696 Rupees Nine Thousand Six Hundred Ninety Six Only

26 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster At groundFloor (Ceiling) 0.600 m2 125 Rupees One Hundred Twenty Five Only

27 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster 189.27 m2 159 Rupees One Hundred Fifty Nine Only

28 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster 107.52 m2 139 Rupees One Hundred Thirty Nine Only

29 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 31.38 m2 34 Rupees Thirty Four Only

30 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass. 3.78 m2 468 Rupees Four Hundred Sixty Eight Only

31 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of oncrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative 0.999 m2 737 Rupees Seven Hundred Thirty Seven Only

32 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of oncrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Wall With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative [Building Sch. Page No. - 64, Item No. - 35(B)(a)(i) ] (B) Wall (i) Coloured decorative 0.999 m2 743 Rupees Seven Hundred Forty Three Only

33 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (a) On timber or plastered surface : 15.12 m2 38 Rupees Thirty Eight Only

34 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (iv) Two coats (with any shade except white) 15.12 m2 81 Rupees Eighty One Only

35 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer 0.399 m2 30.8 Rupees Thirty And Eighty Paise Only

36 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality 0.399 m2 70 Rupees Seventy Only

37 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat 76.14 m2 31.4 Rupees Thirty One And Forty Paise Only

38 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. b) Premium 100% Acrylic Emulsion 76.14 m2 84 Rupees Eighty Four Only

39 Supplying fitting & fixing granite slab 15 mm. To 18 mm. Thick in floor , lobby, stair landing and treads ect. Over 2mm. (avg.) thick base of cement morter (1:2) laid with white cement slurry @ 4.40 kg/square meter before placing of Granite and jointed with white cement slurry @ 2.0 kg/Sq.m. with necessary pigments and complete as per direction of Engineer in charge including cost of all materials, labour, curring and roughening of concrete surface complete. 2.025 m2 3159 Rupees Three Thousand One Hundred Fifty Nine Only

Rupees Seven Lakhs Seventy One Thousand One Hundred Thirty Six Only

Tender Inviting Authority Additional Executive Officer, Purba Medinipur Zilla Parishad

Contract No. NIT No.- 74 of 2025-2026, Sl No.- 09

GROUP - B : Sanitary & Plumbing Works

Sl. No. Brief Description of the Item of Works Total Qty. Unit Rate (Rs.) Words Amount (Rs.)

1 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-11 15 mm 37 m 140 Rupees One Hundred Forty Only 1. A.

(a) For Exposed Work (b) 20 mm 20 m 133 1. B.

(a) For Exposed Work (c) 25 mm 12 m 180 Rupees One Hundred Eighty Only 2

(a) For Exposed Work (d) 32 mm 12 m 265 Rupees Two Hundred Sixty Five Only 3. A.

2 Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe lineincluding all specials No separate payment will be made for accessories, specials.) (a) 32 mm 12 m 250 Rupees Two Hundred Fifty Only 3. B.

(b) 50 mm 12 m 403 Rupees Four Hundred Three Only 4

3 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 5 Nos. 452 Rupees Four Hundred Fifty Two Only 6

4 Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (a) 25 mm 2 Nos. 912 Rupees Nine Hundred Twelve Only 7

(a) 32 mm 2 Nos. 1258 Rupees One Thousand Two Hundred Fifty Eight Only

5 Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 13 Nos. 539 Rupees Five Hundred Thirty Nine Only

6 Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity 1 No. 5128 Rupees Five Thousand One Hundred Twenty Eight Only

7 Labour for punching hole in plastic water storage tank upto 50 mm dia. 2 Nos. 19 Rupees Nineteen Only

8 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size 3 Nos. 2208 Rupees Two Thousand Two Hundred Eight Only

9 Supplying, fitting and fixing 15 mm. Swan neck top with left & right hand operating nob with aerator ( Equivalent to Code No. 510, 5109A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). 3 Nos. 811

10 Supplying, fitting and fixing bib cock or stop cock. (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar 13 Nos. 493 Rupees Four Hundred Ninety Three Only

11 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iv) 750 mm long 8 Nos. 117 Rupees One Hundred Seventeen Only

12 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps (iv) 1050 mm long 3 Nos. 91 Rupees Ninety One Only

13 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap 4 Nos. 1421 Rupees One Thousand Four Hundred Twenty One Only

14 Sypplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap { excluding cost of concrete for fixing). (ii) 530 mm. X 410 mm. 1 No 1522 Rupees One Thousand Five Hundred Twenty Two Only

15 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm 4 Nos. 945 Rupees Nine Hundred Forty Five Only

16 Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm 3 Nos. 881 Rupees Eight Hundred Eighty One Only

17 Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm 5 Nos. 613 Rupees Six Hundred Thirteen Only

18 Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (ii) 25 mm dia. and 600 mm long 5 Nos. 430 Rupees Four Hundred Thirty Only

19 Supplying, fitting and fixing soap holder. (b) Fibre glass 5 Nos. 58 Rupees Fifty Eight Only

20 Supplying, fitting and fixing liquid soap container (d) Polythene 5 Nos. 188 Rupees One Hundred Eighty Eight Only

21 Supplying, fitting and fixing 32 mm. Dia Flash Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flash Pipe. 5 Nos. 155 Rupees One Hundred Fifty Five Only

22 Supplying, fitting and fixing C.I. round grating. (i) 100 mm 7 Nos. 62 Rupees Sixty Two Only

23 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592- 992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm 22 m 292 Rupees Two Hundred Ninety Two Only

24 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592- 992 (B) Fittings xii) Door Bend (LH) & (RH) (b) 110 mm 5 Nos. 284 Rupees Two Hundred Eighty Four Only

25 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592- 992 (B) Fittings v) Plain Y 5 Nos. 206 Rupees Two Hundred Six Only

26 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592- 992 (B) Fittings xv) Vent Cowl (b) 110 mm 2 Nos. 33 Rupees Thirty Three Only

27 iv) Door Tee(LH) & (RH) (b) 110 mm 5 Nos. 85 Rupees Eighty Five Only

28 Plain Bend 450 mm 2 Nos. 89 Rupees Eighty Nine Only

29 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white 4 Nos. 380 Rupees Three Hundred Eighty Only

30 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 5 Nos. 1015 Rupees One Thousand Fifteen Only

29 Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. 1 Nos. 6949 Rupees Six Thousand Nine Hundred Forty Nine Only

30 Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. (iv) For 30 users 1 No 59714 Rupees Fifty Nine Thousand Seven Hundred Fourteen Only

31 Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. 1 No 16232 Rupees Sixteen Thousand Two Hundred Thirty Two Only

Rupees One Lakh Seventy Six Thousand Seven Hundred Eighty Only 29

Tender Inviting Authority Additional Executive Officer, Purba Medinipur Zilla Parishad

Contract No. NIT No.- 74 of 2025-2026, Sl No.- 09

GROUP - B : Sanitary & Plumbing Works

Sl. No. Brief Description of the Item of Works Total Qty. Unit Rate (Rs.) Words Amount (Rs.)

1 Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 240V DP 32 A with fuse on L&N Havells make 1 Each 1315.31 Rupees One Thousand Three Hundred Fifteen And Thirty One Paise Only 1. A.

2 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+ 6 Way Havells Make 1 Each 1105.19 1. B.

3 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Rupees Only 2

32 A DP Havells Make 1 Each Rupees Four Hundred Ninety Two And Thirty Four Paise Only 3. A.

6-32 A SP Havells Make 3 Each 173.04 Rupees One Hundred Seventy Three And Four Paise Only 3. B.

4 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casing-capping and Switch board both on surface] 17 point 754.99 Rupees Seven Hundred Fifty Four And Ninety Nine Paise Only 4

5 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] 11 point Rupees Two Hundred Twenty Two And Forty Eight Paise Only 6

6 Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC 59 RM 87.55 Rupees Eighty Seven And Fifty Five Paise Only 7

7 Supply & Laying 2core 4 sq mm Al armoured cable 6 RM 83.43 Rupees Eighty Three And Forty Three Paise Only

8 Supply & Fixing 240 V,4 no 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 4 Each 1741.73 Rupees One Thousand Seven Hundred Forty One And Seventy Three Paise Only

9 Supply & Fixing 240 V16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 1 Each 166.86 Rupees One Hundred Sixty Six And Eighty Six Paise Only

10 Supply ultra bright LED tube light fittings with high efficacy suitable for installation existing tube light G13 Lamp holder to give glare light 1x22 W LED Tube 9 Each 509.8 Rupees Five Hundred Nine And Eighty Paise Only

11 Supply of double bering ceiling fan of Heavels,Bajaj cromptan make with ISI make energy consumption 50/60 W 1200 mm sweep and including wiring the down road of standard length (upto 300 mm with all accessories as required complete. 2 Each 1968.75 Rupees One Thousand Nine Hundred Sixty Eight And Seventy Five Paise Only

12 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.. 2 Each 398.61

13 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary copper wire connection as required by 2x1.5 sqmm flexible. 2 Each 67.98 Rupees Sixty Seven And Ninety Eight Paise Only

14 Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required 14 Each 165.83 Rupees One Hundred Sixty Five And Eighty Three Paise Only

15 Supplying & Fixing 9 wattL ceiling light 1 Each 674 Rupees Six Hundred Seventy Four Only

16 Supplying & Fixing 10 wattL LED Lamp 3 Each 150 Rupees One Hundred Fifty Only

17 Supplying 9' Exhaust fan 3 Each 1800 Rupees One Thousand Eight Hundred Only

18 Fixing exhaust fan after making hole in wall and making good danages and smoth cement finish etc. as practicible as possible and providing necessary length of PVC insulated wire and making connection for exhanst fan. 3 Each 254.41 Rupees Two Hundred Fifty Four And Forty One Paise Only

19 Fixing only louver shutter/coul on wall haith necessary bolts and nuts (6 mm. dia. x 62 mm. long) 3 Each 156.56 Rupees One Hundred Fifty Six And Fifty Six Paise Only

20 Supplying & Fixing Out door type CFL luminaire (Havells make-LHRC4185099) with deep drawn aluminium housing anodised inside & clear acrylic cover and accessories incl. for 85 watts CFL lamp incl. S&F 32mm dia GI pipe bracket, clamp, nut & bolts etc. 1 Each 1904.47 Rupees One Thousand Nine Hundred Four And Forty Seven Paise Only

21 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 1 Each 64.89 Rupees Sixty Four And Eighty Nine Paise Only

22 Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 1 Set 31.93 Rupees Thirty One And Ninety Three Paise Only

23 Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: 1 Each 1569.72 Rupees One Thousand Five Hundred Sixty Nine And Seventy Two Paise Only

24 Excavation of soil for installation of Earth Electrode and filling & ramming. 2 Cum Rupees Two Hundred Twenty One And Forty Five Paise Only

25 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 1 Item Rupees One Thousand Fifty Nine And Eighty Seven Paise Only

26 Extra for treatment of soil by using salt & charcoal or coke for plate electrode 1 Item Rupees Six Hundred Fifteen And Ninety Four Paise Only

27 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required 1 Mtr 160.68 Rupees One Hundred Sixty And Sixty Eight Paise Only

28 Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm alvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 3 Mtr 94.76 Rupees Ninety Four And Seventy Six Paise Only

29 Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages 4 SWG 3 Mtr 18.54 Rupees Eighteen And Fifty Four Paise Only

Rupees Fifty Seven Thousand Two Hundred Forty Two Only 29

Tender Inviting Authority Additional Executive Officer, Purba Medinipur Zilla Parishad

Contract No. NIT No.- 74 of 2025-2026, Sl No.- 09

GROUP - C Submersible Pump

Sl. No. Description of Item of Work Total Qty. Unit Rate (Rs.) Words Amount (Rs.)

1 Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia. (ii) 80 mm dia. boring etc. top enlargement 54 mtr 287 Rupees Two Hundred Eighty Seven Only

d)(d) 40 mm dia boring upto 150 m. depth. 96 mtr 90

f) (ii) 40 mm dia boring beyond 150 m. depth. 100 mtr 111 Rupees One Hundred Eleven Only

2 Supply of PVC pipes & fittings schedule 80 (medium duty) conforming to ASTMD 1785 and threaded to match with GI pipes as per IS: 1239 (Part-1). 40mm dia. 186 mtr 207 Rupees Two Hundred Seven Only

80 mm dia (internal) 54 mtr 578 Rupees Five Hundred Seventy Eight Only

3 Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with V notch including hire and labour charges for all tools and plants and scaffolding as required complete in all respect. 1 days 7538 Rupees Seven Thousand Five Hundred Thirty Eight Only

4 Supplying PVC strainer of approved make with adapted conforming to IS 12818 specification. a) 40 mm nominal dia. 10 LS 293 Rupees Two Hundred Ninety Three Only

5 Supplying fitting and fixing steel cutter pices upto 450mm longwith socket 40 mm dia. 1 m 124 Rupees One Hundred Twenty Four Only

6 Supplying fitting and fixing heavy type bell mouth reducing socket. 50 mmx100 mm dia. 1 nos 455 Rupees Four Hundred Fifty Five Only

7 Supplying fitting and fixing 300 mm M S housing clamp of approved quality. 1 nos 2235 Rupees Two Thousand Two Hundred Thirty Five Only

8 Supplying fitting and fixing GI cap at top. 100mm dia (internal) 1 set 139 Rupees One Hundred Thirty Nine Only

9 Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. (i) 40 mm 1 Each 51 Rupees Fifty One Only

10 Supply and delivery of submerssible pump sets suitable for 100 mm. borewell having IS specification mark. 1 Each 11000 Rupees Eleven Thousand Only

11 2.5 sq.m. 3 core PVC ubsykated 1.1 KV grade flat submerssible Cable (Make - Finolex / Havells). 40 Each 104 Rupees One Hundred Four Only

12 16 Amps DP Main Switch having rewireable tupe grip Make Havells / Standare. 1 m 588 Rupees Five Hundred Eighty Eight Only

13 Supply of Motor Control Panel suitable for the supplied submerssible pump motor including Start - Stop push buttom Ammeter, Voltmeter, reset buttom, contractor, capacity etc. as necessary all complete as per direction. 1 LS 3291 Rupees Three Thousand Two Hundred Ninety One Only

14 Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes 20 mm 30 143 Rupees One Hundred Forty Three Only

Rupees One Lakh Forty One Thousand Seven Hundred Fifty Three Only

E. ROAD FURNITURE & TRAFFIC SAFETY MEASURE :

Sl. No. Description of Item of Work Total Qty. Unit Rate (Rs.) Amount (Rs.)

1 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

i) 60 cm equilateral triangle 19 Nos. 3164

Rupees Three Thousand One Hundred Sixty Four Only

ii) 60 cm Circular 16 Nos. 4274

Rupees Four Thousand Two Hundred Seventy Four Only

iii) 60 cm x 60 cm square 2 Nos. 4947

Rupees Four Thousand Nine Hundred Forty Seven Only

2 Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). 1 No. 10731

Rupees Ten Thousand Seven Hundred Thirty One Only

3 Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, 2 Nos. 2410

Rupees Two Thousand Four Hundred Ten Only

5 Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.

(ii) Ordinary kilometre stone (precast) 4 nos 1749

Rupees One Thousand Seven Hundred Forty Nine Only

(iii) Hectometer stone (precast) 15 nos 498

Rupees Four Hundred Ninety Eight Only

6 Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips, curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering,making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position

true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. 80 nos. 912

Rupees Nine Hundred Twelve Only

7 Supply fitting and fixing Boundary Pillars as per type design IRC-25 1969 with cement concrete 1:2:4 with stone chips including cost of providing 2 nos. of 6 mm dia M.S. rods of length 1.84 m in the form of inverted U-Shape as main reinforcements placed crosswise to each other and 5 nos. of round shaped 6 mm dia M.S. rods used as binders; the placing of 1st binder should be at 75mm below the top finished surface and the other 4 nos. of binders should be placed at 1.85mm C/C and to be of 90 cm. long with 20cm dia at the base tapering to 15cm dia at the top with head properly round and sunk inscriptions (as directed) at the side with 60cm embedment into the ground after making hole in the ground of size 50cm x 50cm x 75cm and repacking the hole properly with cement conc. 1:4:8 with stone chips and finishing the exposed portion of 30cm length with white wash & painting the inscription as directed including carriage of the post to the site with loading & unloading etc. complete in all respect. 28 nos. 1179

Rupees One Thousand One Hundred Seventy Nine Only

TOTAL : Rs. 274383

Signature of Contractor Signature of S.E.

D. CROSS DRAINAGE WORKS :

1.5m Slab culvert 5 no.

Sl. No. Description of Item of Work Total Qty. Unit Rate (Rs.) Amount (Rs.)

1 Excavation for Structures cum

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . I. Ordinary Soil i) Upto 3m depth. 1

2 Sand filling in foundation trenches and at the back of abutments, wing-wall etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete excluding supply of sand. Quality of sand is to be approved by the Engineer-in-Charge. cum 743.06 0

Fine Sand filling

3 Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. (a) M-15 Grade Using concrete mixer. cum 5704.42

4 Plain / Reinforced Cement Concrete in Open foundation with or without reinforcements, in any part of foundation of bridges / culverts with graded stone chips of appropriate nominal sizes, including screening and cleaning of coarse aggregates, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary, cost of curing with water, including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control, sampling, testing etc. including cost of formwork but excluding reinforcement complete as per drawing and technical specifications. A PCC Grade M20 cum 6616.27

5 Plain / Reinforced Cement Concrete in Substructure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality, cement and water reducing admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete as per drawing and technical specifications. B PCC Grade M25 (i) Height upto 5m I) Using concrete Mixer cum 7132.61

6 Furnishing and Placing Reinforced / Pre-stressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications. B RCC Grade M25 I. Using Concrete Mixer cum 7604.61

7 Furnishing and Placing Reinforced / Pre-stressed Cement concrete in Super-structure with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement and admixtures, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete as per drawing and technical specification including the cost of necessary form work and staging complete. as per drawing and technical specifications. C. RCC Grade M30 I. Using Concrete Mixer cum 7711.78

8 Supplying, fitting and placing HYSD bar reinforcement in Bridge Super-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications MT 49584.53

9 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

20mm thick ( 4:1) cement mortar sqm 176

10 Neat cement punning about 1.5mm thick in wall, dado, window sill,floor etc. sqm 34

11 Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. No. 115

12 Providing and applying of cement washing with admixture of pigment if necessary as directed by E.I.C. 2 coats using cement @ 2.50 Kg /10 sqm sqm 18.3

Executive Engineer

Signature of Contractor Purba Medinipur Zilla Parishad

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Additional Executive Officer, Purba Medinipur Zilla Parishad.

Name of Work: Construction of School Toilet at Dakshin Bishnur Primary School within Bhagwanpur-I P.S in the District of Purba Medinipur.

Contract No: NIT No - 74 of 2025-2026, Sl No-09

Sl. No. Item Description Item Code / Make Quantity Units Estimated COST Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1.01 Construction of School Toilet at Dakshin Bishnur Primary School within Bhagwanpur-I P.S in the District of Purba Medinipur. BI01010001010000000000000515BI0100001113 Nos Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information