Maintenance and Repair works to the Peelamedu Hospital Building in Ward No.26, North Zone

Amount

Scrappimg the existing plaster surface in cement mortar etc. completed as per the direction of depart. officers

Dismantling the damaged Cement mortar brick work as per the instruction of Departmental officers,

Dismantling the damaged Cement Concrete flooring as per the struction of Departmental __ officers

Brick work in cement mortar 1:5 mix using best | quality of country bricks of size 8 3/4" x 41/4" x2 3/4" for foundation and basement including curing | etc complete complying std specification.-1m3

Cement concrete 1:4:8 mix, using 40mm HBG jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm 4 thick and compacted,etc., complete

Plastering with cement mortor 1:5 mix (1 part cement and 5 part sand) using 12mm thick

European Water Closet (Colour) with 'P' or 'S' 4 Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all intemal fittings

Painting with first quality emulsion paint two § coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc.,completed.

Painting with aluminium paint two coats for old iron works as per the direction of departmental officer etc.

Flooring with Cement based Hydraulically pressed Anti skid tiles (pattern design) - 20mm thick of approved colour and quality in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly

Dadooing the walls with white colour Glazed tiles of best approved quality 1on cement mortar 1:2 (One cement and two sand) and pointing with the same colour cement neatly to full depth of tiles in all floors as directed by the departmental officers and complying with standard specification. The colour of the tiles should be got approved by the Departmental officers before execution.

Wiring with 2x1.5sq.mm (22/3.0) PVC . insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch and making good of the concealed portion with suitable colour for PVC open light/Fan Point (For electronic regulator) (5 Points ser coil

Supply and fixing of bulk head fitting with 40w bulb etc. completed.

Supplying and fixing of position of Indian make colour glazed earthwere wash basin550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Wastecoupling, Rubber plug and chain, 32mm dia 'B' class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.,

Cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm gauge hard broken granite stone jelly for All CC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete fixtures in CC works wherever necessary as directed by departmental officer etc., complete..

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixingrequired space extruded section shall be of 6063 and alloy of BSH 9 confirming T is - 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer