M/o work pertaining to completed/closed scheme in South Zone.

Removal of SFRC Cover from its position placed over rain water harvesting chambers and replacing the same at its position and stacking the same within the work area/upto 50m lead i/c all T&P required complete as per direction of Engineer-in-Charge.

Removal of silt by manual means in storm water drains (not exceeding 1.0m in width), lift upto 1.5m, including getting out the excavated silt/garbage and disposal of excavated silt garbage for more than 50mtr lead upto 500mtr all complete as per direction of Engineer-in-charge.

Removal of RCC Beams/Slabs of size 2.70x 0.23x0.23 from top of rain water harvesting chambers by mechanical means/manual and shifting within work area and placing the same in position after cleaning & operation of rainwater harvesting chamber complete as per direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:2:4 (1 cement : 2 coarse sand (zone-II) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: a) Cement mortar 1:4 (1 cement : 4 coarse sand).

12 mm cement plaster of mix : a) 1:4 (1 cement : 4 coarse sand).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.