Loading…
Loading…
Tender Value
₹4.6 Cr
EMD Value
₹9.3 L
Closing Date
14 Aug 2026, 11:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
10.2.The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where. V=Advertised value of the tender in crores of Rupees. N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turn over. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported byAudited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. b(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows. The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as
Defination of Similar Work :- Execution of telecom works of OFC/Quad cable OR LAN/WAN/MAN/Data connectivity OR Integrated Passenger Information System in Railways OR Any zonal telecom works OR VSAT terminals OR IP based Exchange OR CCTV OR VHF/UHF/LTE//Radio/Wi- fi/wireless communication OR PDH/SDH/DWDM/IPMPLS in Railways, Metro Railways, LRT, Monorail, suburban transit system, High Speed Railways or any other Government PSUs or any Government Organization.
8 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer has to go through the Special Conditions as stipulated in Annexure - XVIII of the Tender Document and comply
Name of the work: Hyderabad Division:1) Construction of New Control Office and SCADA building at Hyderabad Bhavan -Telecom arrangements. 2)Provision of facilities for centralized control centre including SCADA at new SCADA building of HYB Bhavan.
Y-SG-36-2026-27-14
Y-SG-36-2026-27-14
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹9.3 L
14 Aug 2026
22 Jul 2026
31 Jul 2026
128 items across 6 schedules · ₹4,64,87,511.63 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of 50 Pair cable of 0.5mm dia, polythene insulated, polythene Sheathed, jelly filled underground telephone cable with poly aluminium moisture barrier, annealed copper conductor, polythene jacketed double steel tape armoured as per specification IRS: TC 30 2005 Amdt 5 or latest (INSPECTION : CONSIGNEE) | Metre | 500.00 | 304 | 1,52,000 |
| 2 | Supply of Thermo shrink jointing kit for jointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77- 2012 Rev. 3 (Amd. itoAmd. 3) or latest. (INSPECTION : RDSO) | Numbers | 5.00 | 3,715 | 18,575 |
| 3 | Supply of Permanently lubricated HOPE Duct with outer diameter of 40mm and inner diameter of 33mm as per specification RDSO/SPN/TC/45/2013 Revision 2.0 or latest . The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. (INSPECTION : RITES) | Kilometre | 18.00 | 66,223 | 11,92,014 |
| 4 | Supply of Plastic couplers - Slip fit / push type for permanently lubricated HDPE duct. (INSPECTION : CONSIGNEE) | Numbers | 500.00 | 85 | 42,500 |
| 5 | Supply of End plug for permanently lubricated HDPE duct (INSPECTION : CONSIGNEE) | Numbers | 500.00 | 34 | 17,000 |
| 6 | Supply of Cable sealing plugs for permanently lubricated HDPE duct. (INSPECTION : CONSIGNEE) | Numbers | 500.00 | 43 | 21,500 |
| 7 | Supply of Rotary duct cutter suitable for cutting HDPE ducts of diameter 20mm to 42mm. The duct cutter shall have a facility of replaceable blades. The blades shall be of high carbon steel. (INSPECTION : CONSIGNEE) | Numbers | 50.00 | 1,046 | 52,300 |
| 8 | Supply of UTP CAT 6 Cable (Roll is 305 Mtr) of D.LINK/AMP/ KRONE or similar make (INSPECTION : CONSIGNEE) | Metre | 50000.00 | 37 | 18,50,000 |
| 9 | Supply of Switch board cable 20 Pair / 0.6mm dia. as per lEO 68080:2002 or latest GR WIR 0603 March 2002 or Latest (INSPECTION : CONSIGNEE) | Metre | 1500.00 | 88 | 1,32,000 |
| 10 | Supply of Switch board cable 5 Pair /0.6mm dia. as per TEC68080:2002 or latest. (INSPECTION : CONSIGNEE) | Kilometre | 2.00 | 17,649 | 35,298 |
| 11 | Supply of Switch board cable 10 Pair / 0.6mm dia. as per TEC 68080:2002 or latest. (INSPECTION : CONSIGNEE) | Metre | 2000.00 | 35 | 70,000 |
| 12 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: 5 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour to be specified by Engineer in charge (INSPECTION : CONSIGNEE) | Metre | 500.00 | 391 | 1,95,500 |
| 13 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour to be specified by Engineer in charge. (INSPECTION : CONSIGNEE) | Metre | 350.00 | 178 | 62,300 |
| 14 | Supply of 10 Sq.mm PVC insulated, multi- strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. (INSPECTION : CONSIGNEE) | Metre | 200.00 | 124 | 24,800 |
| 15 | Supply of 32 Channel NVR as per Specn RDSO/SPN/TC/ 65/2013 ver 6 or latest. (INSPECTION : CONSIGNEE) | Numbers | 2.00 | 28,500 | 57,000 |
| 16 | Supply of STQC approved 8MP or high resolution camera spec with water proof, dust proof for outside application with RDSO SPEC. RDSO/SPN/TC/65/2013 ver. 6 or latest, with STQC Certification(INSPECTION : RDSO) | Numbers | 30.00 | 27,500 | 8,25,000 |
| 17 | Supply of 6TB internal hard disc with power and SATA data cables suitable for 16/32/64 channel super NVR. Make: HP/Dell/Seagate or better (INSPECTION : CONSIGNEE) | Numbers | 4.00 | 15,727 | 62,908 |
| Schedule total | ₹48,10,695 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022.pdf
ATTACHMENT
GCCcorrectionSlip1to10.pdf
ATTACHMENT
GCCCorrectionSlipNo.11.pdf
ATTACHMENT
LetterofCredit.pdf
ATTACHMENT
MakeinindiaPolicy1.pdf
ATTACHMENT
Experience.pdf
ATTACHMENT
Annexure-VIBTurnover.pdf
ATTACHMENT
BankGuaranteee-
ATTACHMENT
TD14_.pdf
ATTACHMENT
Acceptanceofe-BankGuaranteee-BGinWorksContracts.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .