Restoration of cable cutting and providing shed for Genset and improvements to the common toilet in the Chest Clinic, Puducherry.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m -All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand) , cost of required centring , shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars(ISI BRAND OF APPROVED MAKE) including placing the M30 grade Athees make cover block @ 60cm centre to centre

Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm +/- 02mm . Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joint mitred and plastic wilded . The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1 mm +/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as manufacturers specification - Extruded section Profile size 42x50mm.

Providing and fixing to existing door frames - 30mm thick factory made (polyvinyl chloride) PVC door shutters made of styles and rails of a UPVC profile section of size 30x60mm and wall thickness 2mm +or- 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75x220mm metre and welded at the corners. The - stiles of the shutter reinforced by inserting galvanized M.S.tube of size 25x20mm and 1mm + or - 0.1mm wall thickness. The lock rail made up of 'H' section , a UPVC profile section of size 30mm x 100mm and 2mm + or - 0.2 wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620mm,having overall thickness of 20mm and 1mm + or - 0.1mm wall thickness with 20mm panel beading of suitable size / glass (4mm thick plain glass) / louver section, louver frame of suitable size, as per manufactures specification. (For W.C. and bathromm door shutter).

Steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.

Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete

Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 0.80mm thick with zinc coating not less than 275gm/m2

Providing and fixing colour coated galvalume sheet of 550 M.P.A yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31mm pitch of 250mm and overall width of 1060mm and thickness 0.5mm with required J or C hook bolts and nets 8mm dia G.S paint and working etc., complete excluding the cost of purlin, rafter and truss etc.,

Applying one coat of cement primer of approved brand and manufacture on wall surface - Cement primer

Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm)

Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - With cement mortar 1:4 (1 cement : 4 fine sand)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Dismantling precast concrete or stone slab in walls, partition walls etc. including stacking within 50m lead - Thickness above 40mm upto 75mm

Acid cleaning for the existing Mosaic floors, glazed tiles work and removing the stains and decays to give a glassy look etc complete (The acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm.

Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet 250 x 130 x 30mm.

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 25mm nominal outer dia pipes

Providing and fixing ball valve (brass) of approved quality complete. high or low pressure with plastic floats - 25 mm nominal bore.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 - 15 mm nominal bore.

Providing and fixing CP brass pillar cock of approved quality - 15 mm nominal bore

Desilting the canal by removing silt,slush and debries from the bed of the drain removing the grass, buses etc., complete in unhygenic and foul condition including diposal of the same within an average lead of 1km without polluting the environment as directed by the engineer-in-charge- by manual means.

Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.4 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.