REPAIR AND MAINTENANCE OF CERTAIN B/R ITEMS IN MD/OTM ACCN AT CMVL AND MH AREA UNDER GE (U) MEERUT CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortor,complete all as specified and directed.

Dismantling plain or corrugated asbestos cement ( corrugated or semi-corrugated etc) sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick ( AZ 150) of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed self tapping screwe/ J or L type cranked hook bolts complete all as specified and directed.

All as per above item but plain sheet as in ridge all as specified and directed

Dismantling wrought iron or mild steel work of any desription not other wise provided complete all as specified and directed.

S&F MS wind tie for roof including securing bolt etc complete all as specified and directed.

M&L 20-25mm thick machine cut Kota stone slab of size 550mmx550mm in flooring laid and jointed with grey) cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give high gloss (mirror) finish complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per above item 9 above but in skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L providing cement concrete1:2:4 type B1 (using 20 mm graded stone aggregate) in roof kerb or mud stops rounded or chemfered edge complete all as specified and directed.

Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc complete all as specified and directed.

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed

Dismantling wall and ceiling boards ( fibre pulp insullation etc) or insullation boards/ slabs blankets any thickness including cover fillets complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screwas at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50mm and flange of 26mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre all as specified as directed.

Providing and fiing Gypsum board 12 mm thick in ceiling fixed with screw as per manufactures instructions parately) complete all as specified and directed.

M&L preparation of new ceiling surfaces for applying two coat of oil bound distemper over and including 1 mm thick wall care putty complete all as secified and directed.

M&L for applying 15 mm thick rendering in cm 1:4 on brick/ concrete surfaces of external walls finshed even and fair complete all as specified and directed.

M&L preparation of new plastered/ umplastered surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two cement base paint of any tint/shade complete all as specified and directed.

S&F anodised aluminium glazed cupboard shutters, two track (each shutter approx. half the size of opening with two Nos. glazed shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as handle clips (suitable size), locking device, and glazing in panels with 3.5 mm thick coloured/tinted glass Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified a and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.including taking down old cupbaord shutters complete all as specified and directed.

BHAGWAN DAS & Co (BID ID -3509998)