GE/BAS-50/2022-23 SPECIAL REPAIR TO CERTAIN BUILDINGS AT JANGLOT GRN UNDER GE BASOLI AND JANGLOT.

Amount

Taking down chowkat or frame with shutter (with out taking off shutter) from frame n, exec 1.50 sqm each complete all as specified and as directed.

Taking down chowkat or frame exe 1.50 mtrs n. exec 4 Sqm each complete all as specified and as directed.

Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position, complete all as specified and as directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering all as specified and directed.

S&F for Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed with self taping screw complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed with self taping screw complete all as specified and as directed.

Dismantling of ceiling asbestos cement board any thickness including cover fillites, complete all as specified and as directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system of M/S Saint Gobain. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling, using aluminium sections as specified in SSR Part-I, complete all as specified and directed.

S&F Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified and directed.

S&F exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced withcellulose fibre for fixing in 600 mm x 600 mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A, complete all as specified and as directed.

M&L for steel work in tubular trusses,post & purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed.

M & L Plates(plain or chequered) channels,square cut or notched (ordinary and counter sunk forming holes without any attachment Fe - 290 (Gde E-165) complete all as specified and as directed.

S &F mild steel screw bolt,16 to 20mm dia machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut but bolt exc 15CM and n. exc 22.5CM long, complete all as specified and as directed.

S&F Pressed steel frame for doors with double rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm all complete and as specified.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats all complete and as specified.

M&L for Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a), complete all as specified and as directed.

M&L for Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed.

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and as directed.

S&F 4mm Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m in each pane all complete and as specified.

S&F aluminium handle ,cast type, anodised ,125 mm size all complete and as specified.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long all complete and as specified.

S&F aluminium alloy , anodised ,sliding door with hasp and size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section all complete and as specified.

M&L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise describe applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins arches pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

M&L Brick masonry with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cm 1:6 , complete all as specified and as directed.

M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed.

M&L for roughening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm ,complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15 mm screed bed in CM 1:4. complete all as specified and as directed.

M&L for Vitrified tiles double charge in dark shade 9-10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed in CM 1:4, complete all as specified and as directed.

M&L for Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L Rendering 15 mm thick on brick or concrete surface over internal surface with CM 1:6 surface finished ever and smooth with out using extra cement , complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 on brick/concrete surface surface( by using WPC @ 2% by weight of cement) and finishing the surface even and fair with out using extra cement WPC shall be measured and paid separitely.

M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified.

M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified.

M&L Preparation of new plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and over applying two coats of distemper oil emulsion, complete all as specified and as directed.

M&L Preparation of old plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and over applying two coats of distemper oil emulsion, complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as fixing on to wall to make PVC Frame as per specification and drawing.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

M&L applying two coats of colour wash of any colour or tint including preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L prepration of new plastered surface and applying two coats of OBD over cement based putty on plastered surfaces preparatory to receive distemper on wall, complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of colour wash evenly complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls, plasters & cornices including brooming down with steel wire brushing, scrapping down smoke soot, module, moss and efflorescent salts, trading oil/ greasy spots etc., and applying one coat of Oil Bound Distemper (washable) complete all as specified and directed.

S& F aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg . complete all as specified and directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for all complete and as specified.

M&L 75 mm thick PCC Type C-2 ,1:3:6 (using 40mm graded agg) in plinth protection etc.laid in alternate bays all complete and as specified.

M&L for Anti-termite treatment to the under plinth at the rate of 5 Ltr per sqm of surface, complete all as specified and as directed. NOTE:- ATT work shall be carried out through approved applicator of ATT with chemical chloripyrifos 20 EC and gurantee for ATT shall be for 10 years with amount @2.5% for Gurantee money for 10 Years.

S&F Curtain rod colour coated 25mm dia with and including fixing brackets stops, rollers etc.complete all as specified and as directed.

S&F powder coating(min thickness of powder coating 50 micron) aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc, Complete all as specified.

S&F powdered coated of appproved colour, aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make. complete etc.

S&F aluminium anodized doors standard JINDAL or equivalent section size 63.5 x 38 x 1.6mm for frame and section size 47.62 x 44.45 x 1.18mm for vertical style section size 46.72 x 44.45 x 1.4mm for top and central rail section size 95.25 x 44.45 x 1.16mm for bottom rail, section size 19 x 17.3 x 0.80mm for glazing clip for shutter including fabrication to required size and glazed with 5mm thick dark tinted glass including fitting etc including necessary jointing cleat aluminium glazing clips, rubber neoprene packing handles 2 Nos in each door hinges anodised aluminum snap beading screw, mortice lock heavy duty complete all as specified & directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

Material and labour for anodised aluminum standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with and incl tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

S&F Prelaminated particle Board,12mm thick Board interior grade, prelaminated Both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work, complete all as specified and as directed.

S&F 5mm thick Dark Tinted Glass, pin head type in squares exc 0.5 Sqm in each pane, complete all as specified and as directed.

Supply only Integral water proofing compound, ISI marked, complete all as specified and directed.

M&L For PCC (1:3:6)Type C2 (using 40mm graded stone aggregate) as in surface channel and drains complete all as specified.

M & L Brick work with old size bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4, complete all as specified and as directed.

All as per serial item No. 60 herein before but except bricks (using old serviceable bricks) –ditto-

M&L For Cement concrete Type B1 1:2:4 (20mm graded aggregate) in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and as directed.

Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware /Reinforced concrete pipe etc) internal dia of pipe 150mm. Set in cement mortar including PCC packing in bed and hunching complete all as specified and directed (excavation and earth work shall be measured and paid separately).

All as per serial item No 64 here-in-before but internal dia of pipe 200mm –ditto-

Excavation in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth in any type of soil and getting out complete all as specified and as directed.

All as per item 66 above -do- but exceeding 1.5 m n. exc 3.00 m

Material and labour for Reinforced concrete pipes 150 mm bore , class NP3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

All as per serial item No 68 herein before but 200mm bore of pipe –ditto-

Material and labour for plain cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.

All as per serial item No 70 herein before but for 200mm bore of pipe –ditto-

Demolition of precast RCC cover slabs in any location or any position complete all as specified and as directed.

M&L Cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D2 (40mm graded aggregate), complete all as specified and as directed.

M&L PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in coping complete all as specified and as directed.

M&L providing precast cement concrete as in covers slab for manholes with PCC 1:2:4 type B-1, using 20 mm graded stone aggregate and set in CM 1:4 complete all as specified and as directed.

M&L for reinforcement mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with climps complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.

All as per serial item No. 77 herein before but internal dia of pipe 200mm –ditto-

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth in soils, complete all as specified and directed.

Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.

S&F Salt glazed stoneware gully traps 150mm x 100mm, square or round mouthed, complete all as specified and as directed.

Supply and fixing salt-glazed stone ware gully trap square or round mouthed, type ‘P’ 100mmX 100mm , including provision of C.I grating over the trap and embedding the trap in PCC 1:3:6 type C-2 block of size 30cm x 30cm x 45cm deep. (Cost of PCC block also included in this item), fixed as in repair complete all as specified and directed.

M&L for Construction of septic tank with cover slab RCC M-25(Design mix) for 25 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil a directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

M&L for construction of soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size,complete of size 1.8 m dia x 3.0 m deep, complete all as specified and as directed. Ref Drg no CEPZ/TD/013/13 Sht 1/5 to 5/5

S&F bends, rungs, MS round bars handle, straps, supports for stays for rain water ventilations pipes incl bolts if any reqd hooks (stay), heavy for large gates, hook and piddle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall titles, hooks for hanging fans, plan angles cleats for securing for links in wooden trusses for rafters etc confirming in to FE-410-0, FE-310-0.

M&L PCC (1:2:4) type B1 (using 20 mm graded aggregate) as in benching coping, hunching etc. complete all as specified and as directed.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified.

M&L Cement concrete1:2:4 type B-2 (40 mm graded aggregate) in surface channels and drains, complete all as specified and as directed.

Cleaning away all grass vegetation, saplings, shrubs , brush wood under growth and roots for making approach to septic tank around man holes manhole to manhole for sewage lines ancl removing rubbish upto a distance of 50 mtr out side the periphery of the area under clearance. NOTE:- This item shall be executed only after written approval of GE

Surface excavation not exceeding 30 cm and average 15 cm deep and getting out in any type of soil, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed .: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

All as per item No 92 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 92 but for one 3 pin 5 Amp socket outlet on same board.

All as per item No 92 but for bell / buzzer point

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified.

S&F switch piano flush button single pole one way 5 amps 230 volts,complete all as specified and directed by Engr-in-Charge.

S&F switch piano 15 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet 2 in 1, 5 pin 15 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface bakelite65x50mm two to three terminal isolated body suitable foe 240 V AC, complete all as specified.

Supply & fix in Fan Regulator Switch type complete all as specified and directed by Engineer-in-charge.

S& F electric call bell, ding dong, 230V, Complete all as specified and directed.

S&F in replacement LED tube light fitting. ,1x20w, 220v AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

Supply and fixing in replacement of wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge.

S&F ceiling light 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engr-in-charge.

Supply and fix in replacement of LED 48 watt Bldg Security light fitting of IP-66 protection, pressure die cast aluminium housing with epoxy powder coated finish having polycarbonate cover & connecting up with three core flexible copper conductor cable of size 1.5 Sqmm complete all as specified and as directed.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.

S&F MCBs islolator SPN 63 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified and directed.

S&F in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boardscomplete all as specified and directed.

Supply and fixing factory fabricated sheet steel enclosure, phosphatised, power painted, single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amp, 240 volts, 10KA complete all as specified and directed by engineer-in-charge.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L Earthing complete with GI earth plate electrode 60x60cmx6.3mm thick buried directly in ground earth pit not less than 2.25m deep below ground level with topedge of the plate not less than 1.5m below normal ground level connected to GI earth wire 4mm dia protected by GI pipe light grade 15mm dia, 20 mm medium grade for watering with funnel including test point up to 7.5 meter from earth pit, common salt, charcoal dust and connected to panel bd/DB by means of bolts and nuts washers made out of GI all as shown in Electrical plate No 5 of SSR part I including necessary earth work and excavations in any type of soil PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type mix cover slab with 6mm dia MS bars at 100mm dia both ways with MS hook 6mm dia MS bars etc complete a as specified.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clase 19.75 of MES Schedule part-I (2009) complete all as specified and directed. Note : Sand shall be fined sand as specifed and punned thickness shall be measured.

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed.

Supply and laying in trenches tubes medium grade with all fittings 25 mm dia complete all as specified and directed.

S&F gate valve 25 mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe all as specified and directed.

KHOSLA ENGINEERS BUILDERS

Ms International Engineers

sunny construction