Widening and strengthening work from Jahangirabad Feeder Bypass Road to Sugar Mill Road in District Bulandshahr

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per MORT&H specification 301 SI. No. 3.6 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per MORT&H specification 305 SI. No. 3.19 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Construction of embankment with approved material obtained from Right of way pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (3.16) MORT&H Specification 305 Sr No 3.16 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Construction of sub-grade and earthen shoulders with approved material obtained from Right of way with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. MORT&H Specification 305 Sr No 3.18 (Ordinary Earth work) including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. As per MORT&H Specification 401 (B) Sr No 4.1 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Providing, laying and spreading of graded stone aggregate (WMM) after mixing with 4% Ordinary portland cement with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform single layer on sub base/subgrade (Modified Soil) and compacting with the road roller to achieve unconfined compressive strngth as specified by Enginer-incharge. As per MORT&H Specification 406 (A) Sr No 4.14 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORT&H Specification 406 (A) Sr No 4.14 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. MORT&H Specification 502 Sr No 5.01 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 Sr No 5.2 including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 B) Sr. No. 5.5 complete in all respects including cost of all material, labour, T&P, and all taxes labour cess etc. required for proper completion of work as per direction by the Engineer-in-charge. But excluding cost of GST.