REPAIRS/MAINT OF BLDG ROOFS INCL ROOF TREATMENT/REAPAIR TO DAMAGED ROOF SHEETS AND ALLIED ITEMS IN VARIOUS BLDGS AT RS,TIPNIS AND ARJAN AREA, REPAIRS/MAINT OF JOINERY AND ALLIED WORKS AT RS,TIPNIS AND ARJAN AREA, REPAIRS/MAINT OF BPI TANKS AND ALLIE

Amount

M & L Water proofing treatment on RCC roof etc. comprising with the following operations and as specified herein below,,complete all as specified and directed:- (a) Taking down existing old tarfelt, bituminous compound, old plaster including cleaning, picking, sweeping and washing down with water and brushing with neat cement slurry @ 3 Kg per Sqm & removing debris to a distance exc 100m & n.exc. 250m. (b) 15mm thick plastering in cement mortar (1:3) mixed with liquid water proofing compound (WPC to be measured seperately) as per manufacturer instructions finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 300 ml per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be done minimum 100mm on transverse direction and 75mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 lit/Sqm.

Removal of vegetation/grass etc including cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good disturbed surfaces with cement concrete (1:2:4), type B-0 (Using 12.5mm graded crushed stone aggregate), complete all as specified and directed.

Cleaning/Uprooting of vegetation/small trees, muds, garbages, waste etc growth from inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion and above, complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 20mm steel water tubing medium grade galvanised with all fittings laid on walls, ceiling or laying in floors, complete all as specified and directed.

Re-fixing 20mm old steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 15mm steel water tubing medium grade galvanised with all fittings laid on walls, ceiling or laying in floors, complete all as specified and directed.

Re-fixing 15mm old steel water tubing and connection from wall/ceiling surfaces including cleaning for re-fixing or removal to store, complete all as specified and directed.

Demolition of reinforcement cement concrete of any description in any position not otherwise provided (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Disconnecting existing water tanks, exc 250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.

Disconnecting existing tanks, exc 500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal unserviceable materials debris and rubbish to a distance n.exc 100m, complete all as specified and directed.

Taking down soil/waste vent and rain water pipes including all fittings of any size and pattern in any position, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls,complete all as specified and as directed.

All as per item No 15 here-in-above but except pipes (serviceable pipes obtained from item No 14 shall be re-used), complete as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4), complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premisses, complete all as specified and directed.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick in two coats on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately), complete all as specified and directed.

M & L for rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling, complete all as specified and dircted.

M & L for preparing newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whitening primer, complete all as specified and dircted.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and dircted.

M & L for preparing newly plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and dircted.

Cleaning the surfaces of brick/RCC using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (pidifine 2K) @ 0.50 kg/sqm, complete all as specified and directed.

Supply only integral liquid water proofing compound of approved quality, complete all as specified and directed. (Make- CICO NO.1/SIKA/ACCO PROOF/DR. FIXIT)

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern from roof coverings including ridges, hips, valleys and flashings, complete all as specified and directed.

S & F galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120, complete all as specified and directed.

S & F plan galvanised mild steel sheeting 0.80mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description n exc 1 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 & n.exc 2 Sqm each, complete all as specified and directed.

Refixing of shutter of any description exc 1 & n.exc 2 Sqm each in same opening, complete all as specified and directed.

Resecuring or easing & adjusting without taking down of shutters of any description exc 1 & n.exc 2 Sqm each in same opening, complete all as specified and directed.

Refixing of shutter of any description n. exc 1 Sqm each in same opening, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick colour PVC sheet reinforced with M.S. Square tube, as per specification, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification,complete all as specified and directed.

S&F factory made solid wire gauzed i.e. panel will be of wire gauze PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single Side Prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of 150mm long, complete all as specified and directed.

S&F aluminium handles, cast type, anodised of 100mm size, complete all as specified and directed.

S&F butt hinge, medium weight, cold rolled mild steel of 75mm size complete all as specified and as directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay (ISI marked), complete all as specified and directed.

S&F steel windows for industrial buildings, fixed type, with glazing bars (ISI marked), complete all as specified and directed.

S&F pressed steel frames for doors size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F pressed steel frames for doors size of frame 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

M&L 2nd class hardwood plain,solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 25mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fixed in repairs second class hard wood 15mm thick boarding clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replacement of old or decayed boarding in patches including cutting out old, piecing, heading joints, etc. complete all as specified and directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over pink primer, complete all as specified and directed.

S&F 75mm aluminium anodised hasp and staple, safety type and fixed with screws,complete all as specified and directed.

S&F 100mm long ,butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 300mm mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed,complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, hold fast blocks, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing new pins/spring clips and removing rubbish off the premises, complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S & F 3 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50micron) work for doors windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other section of approved make conforming to IS-733 and IS-1285, fixing with dash fasteners of required dia and size including necessary fling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/neoprene gasket. Al sec shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, snap beading for glazing/paneling, CP brass/stainless steel screws, complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

S & F 5.5mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane fixed with aluminium doors, complete all as specified and directed.

M & L for draining of existing underground BPI tank and cleaning of sludge of BPI tanks of capacity 35 KL including replacement of filter and other accessories and following work services :- (a) Scraping inner surface of the tank with brushes taking out complete waste diesel/kerosene or any other foreign material & replacement of un serviceable nuts bolts washers of reqd size. (b) Epicoating of the tank to be carried out by using light coloured epoxy-phenolic resin free from zinc, cadmium and copper alloys minimum one coat to be done. (c) After recoating the tank is to be filled with soft water mixed with the accurate ratio of underground tank inhibitor/anti corrosive agent remidol-4000 in the ratio of 1 Ltr remidol 4000/1000Ltr of water for preservance upto 8 hrs. (d) Cleaning of surrounding area of BPI tank carefully and filling of sand above tank completely. Note : Cost of pumping of DHPP(N) and filling of sand shall be measured and paid seperately.

Dismantling of main cover and taking out diesel from BPI tank which remain in the tank and contractor shall make arrangement and refill it into the tank after cleaning, complete all as specified and directed.

S&F in relacement of gun metal gate valve with iron wheel head, screwed both ends for iron pipes and fixed of size 40mm dia, complete all as specified and directed.

S&F in relacement of gun metal gate valve with iron wheel head, screwed both ends for iron pipes and fixed of size 50mm dia, complete all as specified and directed.

S&F in repair GI tubes medium grade of size 40mm dia including all connected fittings and accessories etc, complete all as specified and directed.

S&F in repair GI tubes medium grade of size 50mm dia including all connected fittings and accessories etc, complete all as specified and directed.

S & F for power pack, industrial type,150 AH, 12 Volt, 25 plate, along with copper lead and clamp, complete all as specified and directed. Make: Exide/Amaron or equivalent make as approved by GE.

S & F for power pack, industrial type,180 AH, 12 Volt, 25 plate, along with copper lead and clamp, complete all as specified and directed. Make: Exide/Amaron or equivalent make as approved by GE.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or laying of cable in trenches etc. and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

All as per item No 79.00 above, but 50mm dia, complete all as specified and directed.

Material & Labour GI tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 16 Sqmm 4 core including taking out old u/s cable of any description, complete all as specified and directed

All as per item No 82.00 above but sectional area 35 Sqmm 3.5 core, complete all as specefied and directed.

All as per item No 82.00 above but sectional area 50 Sqmm 3.5 core, complete all as specefied and directed.

M& L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead of wire 4mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron protection pipe light grade of 20mm dia and watering pipe medium grade of 15 mm dia and filled alternate layer of charcoal or coke and salt, watering funnel with wire mesh, earth pit chamber and CI cover with angle iron frame PCC pit in, (1:2:4) type B-0 all as shown in electrical plate No 3 of SSR Part I of 2009 connected to earthing test point or as directed by Engr-in-charge all specified and indicated including necessary excavation and earth work in hard/ dense soil, complete all as specefied and directed. Note: GI Wire from Earth pit to pole/panel/DB will be included in the quoted rates

M &L for horizontal boring under the road below 1mtr from the road surface with manual method and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of outdoor type LT bus bar box of size not less than 900mm (L) x 900mm (b)x 450mm (d) of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof (CPRI approved) made out of 3.15mm thick CRCA sheet mounting on 40x40x5mm angle iron supports at the base duly painted with powder coated and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size cable glands, lugs etc, proper arrangement for ventilation, complete all as specified and directed.

Supply and fixing sheet metal enclosure for double door MCB DBs, phosphates, powder coated, triple pole & neutral (TPN), suitable for 6 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

Supply & fixing lsolator four pole capacity 100 Amps, 415 Volts fixed in proper position including connecting wire as per site requirement, complete all as specified and directed. Make: Legrand/L & T/ Hager or equivalent

Supply & fixing MCB single pole and neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, 'C' series, fixed in proper position complete all as specified and directed. Make :- Cat Part No. 4086 18 to 4086 20 of legrand or equivalent model of Havells/ L&T/ Siemens

Supply & fixing MCB single pole SP of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, 'C' series, fixed in proper position, complete all as specified and directed. Make :- Cat Part No. 4085 87 to 4085 95 of legrand or equivalent equivalent model of Havells/ L&T/ Siemens

Supply and draw sub main wiring in repairs of two run 6.0 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable FRLSH 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25mm size (ISI marked) including all conduit accessories for concealed to the surfaces of the wall/lceiling including one run of 6.0 Sqmm single core PVC insulated unsheathed copper earth continuity conductor, complete all as specified and directed. Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduits accessories shall be measured and paid as one length.

Cutting chases, pinning in, making good to facings in stone concrete wall/ blocks/slab where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

M & L in replacement of MS meter box of size 900 x300 x 1500mm (double door) 2.0mm thickness, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type including fixing transparant glass (04 Nos) infront of meter and meter mounting arrangment inside the box with powder coated painting for mounting of, electric meter etc inside the box fixed in wall by necessary cutting wall of suitable size in concealed and making good of the surface, by applying cement work, brick work and matching colour (oil bond distemper) etc including dismantling of old MS box, electric meters and fixing the new/existing electric meters in new box carefully and marking Identification number of meter including necessary electric connection by suitable size of copper conductor cable of required length and testing, complete all as specified and directed. Note: An amount of Rs 78955.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP

SHRI D P AGARWAL

M/S. NARENDRA KUMAR GARG

M/S BISHAL ENTERPRISES

M/S. VINITA CONSTRUCTION

M/S ASHOK ENTERPRISE

M/S MANODEEP CONSTRUCTION