Construction of New Primary School building/Kitchen Shed/Boys Toilet/Girls Toilet at Perhan, Zone Kishtwar, District Kishtwar (5th call)

Amount

Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) ,including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: 60% All kinds of soil and 40% ordinary rock)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 : 4 : 8) 1 cement 4 coarse and 8 stone aggregate grade , with 40mm nominal size . Crushed including all lead lift and carriages.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of crushed stone aggregates 20% boulders including all lead lift and carriages.

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level cement mortar 1:6 (1 Cement: 6 coarse sand) including all lead lift and carriages.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all works upto plinth level ( 1 :1.5 : 3 )1 cement 1.5 coasre sand 3 stone aggregate grade , with 20mm nominal size including all lead lift and carriages.

Providing and laying of damp proof course of 40 mm thick with cement concrete 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates),mix with 12.50 mm thick crushed stone aggregates including all lead lift and carriages.

Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar including superstructure upto floor Vth level including all lead lift and carriages.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including all lead lift and carriages.

Reinforcement of RCC work in plinth band incl straightening, cutting, bending , placing in position and binding all complete. Thermo mechanically Treated Bars including all lead lift and carriages.

Half brick masonary with bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement 4 coarse sand) including all lead lift and carriages.

Extra for brick work in superstructure above plinth level upto floor V level (by manual mean)

HONEY COMB brick work 10/11.40 cm thick bricks of class designation 75 in cement mortar 1:4,mix. 1 cement: 4coarse sand)including all lead lift and carriages.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces

Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.coir veneer board (conforming to IS 14842)(12 mm thick)

Pre-laminated particle board with decorative lamination on both sides, Grade I, Type Il lS: 12823 marked towards the cost of 4mm thick float glass

Providing and fixing paneled or glazed shutters for doors and windows and clestory windows using 10 kg /sqm (4mm thick) float glass panes including ISI marked black enameled M.S. butt hinges bright finished of requried size with necessary screws,( 35mm thick of 2nd class kail wood).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings I wooden frames with rawl plugs screws etc.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood 50x12mm

Providing form work for foundation footing bases of column (Plinth band)

Providing form work for foundation footing bases of column

Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.

Edges of slab and breaks in floors and walls(under 20 cms wide)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6 fine sand )including all lead lift and carriages.

12 mm cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 cement 6 fine sand )including all lead lift and carriages.

12 mm thick plaster in 1:4 , 1 cement:4 fine sand )including all lead lift and carriages.

6 mm cement plaster on the rough side of single or half brick wall of mix 1:3 ( 1 cement 3 fine sand )including all lead lift and carriages.

Cement concrete flooring in (1:2:4) 1 cement : 2 coarse sand : 4 stone aggregate finishing with a floating coat of neat cement including cement slurry but exd. The cost of nosing of step etc. complete 40mm thick with 20 mm nominal size stone aggregates (nallah) including all lead lift and carriages.

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick

Providing and fixing flat pressed 3layer medium density .particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately)12 mm thick

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood

Providing and fixing glass strips in joints of terrazo cement concrete floor.40 mm wide and 4 mm thick

Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring.

Providing corrugated G.S. sheet roofingincluding vertical/curved surface fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead including a coat of approved steel primer and two coats of approved paint on overlaping of steels complete ( upto a pitchin horizontal/vertical or curved surface) excluding the cost of purlin ,rafters and trusses and including cutting to size and shape where ever requried 0.63 thick with zinc coating not less than 275 gm/sqmincluding all lead lift and carriages.

Providing ridges of hips of width 60 cm 0verall width plain GS Sheet fixed with polymer coated J or L hooks bolts, nuts 8 mm diameter with bitumen and G.I limpet washers complete 0.50mm thick

Providing and fixing plained eaves boarding (12 mm Ply board),250mmx32mm nominal size.

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controlled (led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat cement primer of approved brand and manufacture on walls surfaces cement primer

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades including priming coat

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed Aggregates.including all lead lift and carriages.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. To giv e an even shades new steel work two or more coats

White washing with lime to give an even shade with two or more coats for new work.

Providing and fixing plained eaves boarding(2nd class kail wood),250mmx32mm nominal size.

Providing and fixing soil, waste and vent pipes : 100 mm dia.

Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete : 100 mm.

Providing and fixing collar :100 mm.

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: Internal work exposed on wall 15 mm dia. nominal bore(light)

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing brass bib cock of approved quali1ty. 15 mm nominal bore

Providing and fixing brass stop cock of approved quality. 15 mm nominal bore

Providing and fixing p.v.c waste pipe for sink or wash basin including p.v.c waste fitting complete semi rigid pipe 32 mm dia

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm

Providing and Fixing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 X 10 MM

Providing and Fixing aluminium tower bolt ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 200 X 10 MM

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and Fixing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 125 mm

Providing and Fixing aluminium handle ISI marked anodized (anodic coating not less than grade AC as per IS 1868)transparent or dyed to required colouur or shade with necessary screws etc. complete 100 mm

Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2mm thick PVC pipe 5amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

shafiq ahmed sheikh

BILAL ASHRAF MINTOO

NASEER AHMED