Day to day maint and certain other works at OTM and Rep/Maint to water proofing treatment, sunken floor, toilet block, sanitary fittings and all connected works in OR/JCO Md Accn at Mil Stn Gaya

Amount

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples as directed by Engg- in- charge.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or rubber beading in squares of any size complete all as specified and directed by Engr-in-charge.

S&F 4mm thick figured glass pin head type and glazing with oil putty or rubber beading in squares n exc 0.50 Sqm each pane complete all as specified and directed.

S&F as in repair double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge. Make Classic or equivalent

S&F 15mm size with Stainless Steel Braided Hose/Connection Pipe with Brass Nuts of length 750 mm all as specified and as directed. Make: Jaguar/Hindware/Prayag

S&F as in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. Make - Prayag/Polytuff/Symet

S&F in repair 15 mm dia two way Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-Parryware/ Prayag/Hindware)

S &F as in repair chromium plated shower rose 125 mm dia with 600mm CP shower arm fancy type fixed to 15mm bore pipe all as specified and directed. (Make-Parryware/ Prayag/Hindware)

S & F CP as in repair jet spray complete all as specified & directed. (Make-Plumber/Prayag/Hindware)

S & F as in repair soft closing white Seat Cover for EWC incl accessories complete all as spd (Make-Jaguar/Hindware/Kohler )

Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supplying and laying as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

S&F as in repair 15mm bore two way angle valves brass chromium plated fancy type concealed type screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed Make - ESSCO/Jaguar/Prayag

S&F in repair white colour rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/Polycon

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L Rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed.

M&L Rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.

M&L Rendering 15mm thick external surfaces on brick/concrete walls in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC shall be measured and paid separatly

M&L Applying two coats of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces

M&L Applying two coats exterior emulsion paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed

M&L Granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed

M & L Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6.including taking down existing tiles. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring)

M & L Digital Glazed ceramic coloured tiles in vertical surfaces area of each tiles not exceeding 0.16 sqm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 as backing for tiles incl taking down old tiles complete all as specified and as directed. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring)

M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6.(Note : Work will be carried out as in repair of patches in lieu of existing broken flooring)

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 557 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 600 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete.

S&F in repairs of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engineer-in-Charge. Make : Everest/Armstrong

S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as per specified and directed by Engr-in-Charge.

S & F Taper clips, tee, angles and other items for aluminium door complete.

S & F Rubber gasket for aluminium door glass complete

S & F Aluminium handles, cast type, D shape for aluminium door anodised of size 250mm.

S&F 4.80 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exc 0.5 Sqm in each pane, complete all as specified and directed.

S& F 125mm butt hinges, extruded Stainless steel with hinge pin complete. Make Prayag or equivalent

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section.

S&F in repair steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia, 100 mm size

S&F 150 mm long mortice lock with four levers (vertical type), mild steel body complete all as specified and directed.

Supply only liquid water proofing compound

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

S & F as in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. Make : Jaguar/Hindware/Kohler

S & F as in repair 10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets (Make:- Parryware/ Hindware /Jaguar)

S&F as in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)

Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level)

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor finishes 75 mm thick as in sub base complete

S&F in repair 15 mm bore bib taps long body, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make-Jaguar/Hindware/Prayag)

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed Make: Gordrej/Link

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

Roughening surfaces of old concrete flooor by picking, sweeping clean and washing down with water to remove dust etc.

Taking down chowkhats or frames exc 1.5 Sqm but exc 4.0 Sqm (without taking shutters from the frame).

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples

M&L 25 mm thick cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in levelling coarse of floor complete.

M&L Non skid ceramic tiles coloured 400 x 400 x 7 to 8 mm thick in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed or bedding layer of cement mortar(1:4) complete.

S & F Glazed ceramic coloured tiles 450mm x 300mm x (7-8mm) thick (square /rectangular) in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match 10 mm thick rendering/backing coat on other than fair faces of brick wall in CM 1:4 all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with S or P trap front or back inlet complete including connection to trap and to flushing pipe anti syphonape pipe , including provn of lean concrete (1:5:10) using 40mm brick aggregate bedding with 40 mm bore GI spout pipe (750 mm long) complete all as specified and as directed. Make Hindware/Parryware/Cera

S&F PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed.

S&F 15mm dia steel braided hose connection 60cm long with CP nuts fixed as in repairs.

S&F in repairs brass chromium plated. Soap dish fixed to wall with CP screw all as specified and as directed. Make -Seiko/Plumber/Essco- K.

S&F Brass chromium plated corner glass shelf (8") (Cat No-192) fixed with screw to the corner of the toilet all as specified and as directed. Make- Prayag/commander.

S&F 600mm long brass chromium plated tubular tower rail 20mm dia, D type fixed with two rawl plugs in cement mortor 1:3 with MS screws complete all as specified. Make -Seiko/Pumber/Parryware/Essco-K

S& F PVC ( SWR ) nahani trap / floor trap plain incuding jointing with solvent cement 75 mm dia all as specified and as directed. Make-Reliance/fnolex/Supreme/Kisan/Prince.

S&F Grating steel chroumium plated gratings fixed on floor trap/Nahani trap in cement mortar 1:6 as specified and as directed. Make -Seiko/Pumber/Perryware/Essco-K

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and solvent, laid in trenches or in floors and connecting with manholes or disposal place all as specified and as directed. Make- Reliance/finolex/Supreme/ Kisan/ Prince.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and solvent, laid in trenches or in floors and connecting with manholes or disposal place all as specified and as directed Make-Reliance/finolex/Supreme/Kisan/Prince.

S&F 75mm dia bore (SWR) branch piece, single (single Y) equal or unequal Make-Reliance/finolex/Supreme/Kisan/Prince.

S&F PVC (SWR) 110 (T) with access door all as specified and as directed Make-Reliance/finolex/Supreme/Kisan/Prince

S&F 110mm dia bore PVC (SWR) vent cowl Make : Reliance/finolex/Supreme/Kisan/Prince

M & L Providing cement concrete Type B-0 1:2:4 in roof kerbs or mud stops, rounded or chamfered on edges complete all as directed by Engr-in-Charge.

Supply and fix as in repair 15 mm Bib taps fancy cast copper alloy (CP) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and as directed. Make -Jaguar/Hindware

S&F 15mm brass spindal for stop valves chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed Make -Essco-H

S&F PVC door frames of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplied and fixing as specified and shown of SSR 2010 part-II complete all as specified and as directed.

Supply and fix factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specificaiton and drg SSR Part-II.

S&F Butt hinges,100mm long, cold rolled mild steel medium weight, and fixed with steel screw or welded to steel frame where required complete all as specified and as directed.

S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (ISI marked)

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (MTA/ FBTA) of 20 mm outer dia complete all specified and directed.

S & F 150mm long size extruded aluminium alloy handles, cast type anodised complete as specified (ISI Marked).

M & L Applying two coat of cement base paint as per manufacturer instruction on existing old treated surfaces including preparation of surfaces all as specified.

M & L Application of 1.00mm thick birla white putty/JK white in wall/ceiling care putty in two layers and making the surfaces smooth & uniform on new plastered surfaces of walls all as specified and as directed.

M & L One coat of distemper with acrylic distemper on walls/ceiling and making the surfaces smooth & uniform incl removing existing treatment all as specified and as directed.

M & L Rendering 15mm thick on roof or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement including WPC as per manufacturer instruction complete all as specified and directed by Engineer-In- Charge. (WPC will be measured seperately)

M & L Cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. and application Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm complete.

S & F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application (including sider lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification) including taking down existing APP membrane and removing upto 500 mtr away from working site complete. Make : M/S STP (Super thermolay)/IWL

M & L Repair of sunken slab as under :- (a) M & L Application of 1:3 cement – sand mortar, mixed with Sika Latex emulsion (300 gram in 1 Kg cement), as a coving at the corners of floor and the vertical surface in the sunken area and between floor and walls in the remaining area. (b) M & L Application of Sika Top Seal 109hi @ 2.20 Kg per Sqm each coat or as per manufacture instruction– acrylic based, ready to use, cementitious, water proof coating onto the prepared surface in a continuous film on the floor of the sunken area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall (before tiling) to at least 300mm above the final finished floor level. The coating shall also be continued on to the inner surfaces of the pipe penetration holes. Two coats shall be applied & fiber Glass Cloth to be laid in between coats. (c) M & L Application of Sikagard 694 F (I) @ 100 gram per Sqm or as per manufacture instruction, a moisture insensitive epoxy putty in a continuous, 10mm thick gasket around the pipes to a width of approximately 15mm. (d) M & L Application of protective screed concrete at a desired thickness admixed with Sika Cim Pink @ 100 gram per Sqm or as per manufacturer instruction

BALAJEE CONSTRUCTION

MS HARI MOHAN GUPTA

M/S ABHAY KUMAR AND BROTHERS