Package No. TRC/SOPD-G/GOH/14

Amount

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. (II) By Manual Means (B) In area of non thorny jungle

Plastic Bag Garbage waste Dusbin (200 Lt)

Scarifying Existing Bituminous Surface to a depth of 150mm and disposal of scarified materials with a lift upto 3m and lead upto 1000m

WBM Gr III: Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Prime Coat : Providing and applying primer coat with Bitumen Emulsion on prepared surface of Granular Base including clearing of road surface anr spraying primer at the rate of 0.90 - 1.20 kg/Sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat:- Providing and applying tack coat with bitumen emultion (CRS-1) using emultion distributor at the rate of 0.25-0.30 Kg/sqm on the prepared granular surface treasted with primer & cleaned with hydraulic broom as per technical specification clause 503. ( 38 % of total area)

Semi Dence Bituminous Concrete: (Providing and laying semi dence bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed stone aggregate of specified grading premixed with bituminous binder @ 4.5 to 5% of mix and filter transorting the hot mix to work site, 508 @ 4.5 to 5%, laying with a hydrostatic paver finsher with sensor control to the reqd. grade level and alignment rolling thesmooth wheeled vibratory anf tandem roller to achieved the desire compaction as per MoSRT&H Clause No. 508 complete in all respect. (including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 km initial lead from mixing plant (including cost of testing of material at site and laborotory as directed by the deptt.) (a)With hydrated lime/cement as filter (refer table 500-9 of MoSRT&H specification) (I) With 60/70 or VG 30 grade bitumen (ii) For Grading-II (10mm nominal size).

Supplying, fittinng and fixing RCC guard post size 15cm dia 150cm long 75cm above the ground and 75cm below ground, with 4 Nos. 12mm tor steel main reinforcement and 6mm MS stirrups at 30cm centres tied in position with annealed black wire, cement concrete position 1:2:4 with broken stone aggregate upto 20 mm size including centering moulding the top, curing painted black and white alternately in 23cm stirrups up to .75m from the top having reflective band 2 Nos. desired 2 shade etc. as per design and direction complete . (i) 15cm dia with 4-12mm tor bar.

Providing and Laying of hot appliied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gm per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35. the finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications.

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting............with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. ( All the Steel work must be Tata/Sail/or any other approved brand) 60 cm Equilateral Triangular

60 cm Circular

80 cm x 45 cm Rectangular

60 cm x 60 cm Square

90 cm High Octagaon

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the produres recommended by the manufacturers with three months replacement warranty and free maintenance.

Providing and erecting direction place identification retro-reflectrorised sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 75x75x6mm, 2 Nos. firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing.

Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire conforming to IS:280 & IS: 4826 in 100mm x 100mm mesh (weaved diagonally) including 10% extra for laps and joints laid with stone boulders weigning not less than 40 Kg each.)

JANARDHAN BRAHMA