Tender for the Work of construction of 5.0 lakhs liter sump cum pump house, 130 HP Submersible pumpset, 350 mm dia DI rising main, construction of 5.0 lakhs liter OHT and allied works coming under NW-1 division.

Tender for the Work of construction of 5.0 lakhs liter sump cum pump house, 130 HP Submersible pumpset, 350 mm dia DI rising main, construction of 5.0 lakhs liter OHT and allied works coming under NW-1 division.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Same as above for 3.00 6.00 m depth

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Same as above for Depth exceeding 1.5 m, but not exceeding 3 m

Same as above for Exceeding 3 m but not Exceeding 4.50 m

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Same as above for Depth exceeding 1.5 m, but not exceeding 3 m

Same as above for In Hard Rock Blasting prohibited Depth Exceeding 3 m but not Exceeding 4.50 m

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes m...

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Form work for centering

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granitetrapbasalt crushed graded coarse aggregates and fine a...

Form work for centering

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Form work for centering

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Form work for centering

Steel Fabrication Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingweld...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 1 cement: 4 coarse sand including cost of all materials, labour,...

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 1 cement 6 coarse sand including cost of all materials, labour, s...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Form work for centering Plinth Beams

Form work for centering Lintels

Form work for centering Roof Beams

Form work for centering Roof slab

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Form work for centering Chejjas

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Form work for centering Loft

Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 1 cement: 4 fine sand including rounding off corners wherever required smooth rendering, providing and re...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 1 cement: 6 fine sand including rounding off corners wherever required smooth rendering, providing and ...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 1 cement: 3 fine sand including rounding off corners wherever ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth...

Providing White washing with lime to give an even shade :New work three coats with lime of approved quality, including cost of materials, labour complete as per specifications and as per direct...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work two coats over and in cluding water thinnable priming coat with cement prime...

Finishing walls with water proofing cement paint of required shade :New work Two coats applied @ 4.84 kg10 sqmt to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and laying vitrified floor tiles with thickness 10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours...

Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 1cement: 4 coarse sand , with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & ...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work Two coat applied @ 1.67L10 sqmt over and including priming coat of exterior primer applied @ 2.20 kg10 sqmt with pai...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work hard and soft wood including preparing the surface after thorougly cleaning oil,...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L10 sqmt over an under coat of primer applied @0.75 L10 sqmt of approved brand and manufacture t...

Providing Thermo Mechanically Treated bars of grade Fe 500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Providing & fixing of 2.5 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum T iO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Ela...

Providing and fixing storage unit of 0.60m depth made out of 19mm thick commercial ply vertical ply finished in approved 1.00m laminate with 18mm thick ply packing internally finished with enamel pain...

Providing and fixing aluminium tower bolts, ISI marked, anodised anodic coating not less than grade AC 10 as per IS : 1868 transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. for Sump

Providing and fixing chromium plated brass handles of 100125 mm with necessary screws etc. complete. for Sump

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete for Sump

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, ic fixing the pipe with cl...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, ic fixing the pipe with cl...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, ic fixing the pipe with cl...

Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore for Sump

Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete : 15mm dia Nominal bore for Sump

Providing and fixing brass bib cock of approved quality : 25 mm nominal bore. for Sump

roviding and fixing PVC S.W.R Nahani Trap 10cms x 10cms with all

fitting arrangements & all necessary accessories complets for Sump

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia Common for Sump

Providing and fixing unplasticised PVC connection pipe with brass unions :20 mm nominal bore for Sump

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terraceChajjasSunken portion of WC Bathroom, cold applied PU...

Providing and placing on terrace at all floor levels polyethylene water storage tanks IS 12701 marked with cover and suitable locking arrangements and making necessary holes for inlet, outlet and ove...

Providing & fixing White vitreous china water closet squatting pan Indian type along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operat...

Providing and fixing white vitreous china laboratory sink with C.I. brackets,C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.brass trap with necessary C.P. brass unions complete,...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the ...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. for Sump

Providing and laying cinder concrete in cement 1:15 1 cement : 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, ...

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pi...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. for Sump

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150mm diameter. for Sump

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g for Sump

Providing and fixing 8 mm dia C.P. S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge. for Sum...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm inner dimensions with modular bricks of CD 75in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plasteri...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...

Providing and fixing M.S. Inspection door of size 60 cms x 60 cms. including M.S. frame, size 50 x 50 x 6 mm and shutters of 3mm thickness with hinges at top and locking arrangements painting with all...

Providing and fixing MS ladder between landings, 45 cms wide usingangle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed, ...

Providing and fixing Enamelled guage with iron sheet of 3 mm to 4 mm thickness, 0.23 Mtr. width with copper floats indicators and flexible nylon wires, painting figures with approved enamelled gauge p...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end ocks, mounted on speci...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded P...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to st...

Providing and fixing R.C.C. finial and ventialators as per approved design and specification with form work and protected with wire mesh. The plinth to be of R.C.C. circular pillars and canopy with an...

Filling available excavated earth excluding rock in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...

Supplying and fixing DICI puddle flanges conforming to IS 7181 1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...

Same as above for 300mm dia inlet & outlet

Same as above for 400mm dia outlet

Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining CML with Portland Slag Cement as per IS 455:1989 PN 16 for Sump

Do 150 mm Dia over...

Same as above for 300mm dia inlet & outlet

Same as above for 400mm dia outlet

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewer, effluent and water treatment plants...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050, shaft of stainless steel, wedge f...

Same as above for 200mm Dia PN16

Same as above for 400 mm dia sluice Valve of PN 16.0

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes m...

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super ...

Form work for centering

Steel Fabrication

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingweld...

Concealed Conduit System: Supplying……mm dia 2mm2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metalPVC junction boxes adhesive paste etc., and running before concreting the sl...

Same as above for 25mm dia 2mm thick

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thickwith suitable size bends, metal junction boxes adhesive paste etc., bygroove cutting in the wall and fixing by bracing U or J hooks and ...

Same as above for 25mm dia 2mm thick

Supplying and fixing PVCmetal conduit accessories.Deep junction box 25mm deep junction box. Special type junction box: 1920mm for Sump

Same as above for Deep junction box: 25mm Deep Junction Box

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall 3Way for Sump

Same as above for 4 5Way

Same as above for 6Way

Same as above for 8Way

Same as above for 10 12 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with necessary supporting back plate with required nos. of machine screws, bolts,...

Same as above for 4 module

Same as above for 6 module

Same as above for 8 module

Same as above for 10 12 Module

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5sqmtm Phase & Neutral & 1x1.0 sqmtm Earth wire FRLS multi strand PVC insulated copper wir...

Same as above for Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

Supplying and fixing of modular switch Socketstepped electronic fan regulator dimmertelephone socket etc on existing modular switch plate. I. Using Group "A" materials for Sump

6 Amps one way.

Same as above for 6 Amps two way.

Same as above for 6A Three Way socket

Same as above for Stepped fan regulator two module

Same as above for 16A One way switch

Same as above for 6A Bell push

Same as above for 32 Amps DP switch

Same as above for 616A Universal Socket

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm .... etc. as required. a 20mm for Sum...

Supplying PVCGI flexible conduit pipe .... mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using...

Supplying and fixing one of 230volts ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. Ding Dong Bell for Sump

Supplying and fixing of round or oblong type bulk head fitting glass cover. for Sump

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diHead Roomuser with Life of 25000 burninghours 70% lumen maintenance with CRI 80. PowerInput: 220 240 5060Hz & Power facto...

Supply of roundsquare recesssurface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivellin...

Providing, supplying to work site, Single Phase Submersible Pump Sets of 100mm dia 4 inch suitable for bore well confirming to IS 8034 2000 specifications,with testing of as per instructions of engi...

Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS 374 1979 and with double ball bear...

Supplying of 1440rpm heavy duty exhaust fan with bracketblades suitable to operate on 230V 50Hz, AC Supply complete. 12" sweep for Sump

Fixing all types and all capacities fluorescent false ceiling spot light CFL fittings indoor on the wall ceiling rafters girders using 230.0076" twin twisted pvc insulated wires, required nos. of...

Fixing a ceiling wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 ampers ceiling rose, necessar...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with suHead Roomicient length of 230.0076 inch pvc insulated twin core wire of approved make. ...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 Mtr long GI pipes with GI funnel with mesh and suitable size reducer fixed ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring stripthickness and resistivity as per IS 3975 for Sump...

Supplying litres capacity verticalhorizontal type wall mounting Electrical water heater with 22 SWG copperSS sheet metal inner Container tinned inside and anticorrosive paintoutside and 20 SWG M.S. sh...

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff for Sump HT cable 3x95 to 150 sqmtm

Digging of trench of 0.6m deep x 0.50 Mtr wide refilling the trench to the required ground level and consolidating etc., complete.b In soil hard for Sump

Wiring for lightingpower circuit using one of PVC insulated 1100v grade, multistrand copper conductor single core cable in open or concealed system of wiring. 1.5sqmtm for Sump

Same as above for 2.5 sqmtm

Same as above for 4 sqmt

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS 732...

Providing and fixing Steel work welded in built up sections framed work, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer using structural steel etc....

Pump Supply and delivery of the equipment included in the facilities at project site Raw water submersible Pumpsets Supply delivery at site brand new best efficient make Centrifugal raw water submers...

Manufacturing, providing, trasporting, rolling, lowering, laying,jointing and commissioning of ERW Electric Resistance Welded SAW Submerged Arc Welded MS pipes of Outer dia Fe 410 grade conforming...

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS 732...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron DI conforming to IS 1865 and of grade GGG 4050, shaft of stainless steel, wedge f...

Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...

CONTROL SWITCH GEAR PANELS

Supply and delivery at site brand new any Board approved make floor mounting, free standing, cubicle type control panel board unit suitable for operation on 3 phase 50 cycle...

Supply, delivery and commissing at site brand new board approved make or equivalent floor mounting, free standing, cubicle type Soft Starter panel board unit suitable for operation on 3 phase 50 cycle...

Power capacitor Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400440 V grade, for power factor improvement of rotating machineries like induction motor...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring stripthickness and resistivity as per IS 3975 Main si...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring stripthickness and resistivity as per IS 3975 Load si...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring stripthickness and resistivity as per IS 3975 3X50 sq...

Erection of pumpset: Formation of suitable block machine foundation in CC 1:2:4 confirming to the latest ISS 2974 using all the required materials such as cement, sand, jelly etc., complete. Erection ...

Erection of Control Panel Board & starter on CC foundation including formation of CC foundation in CC 1:2:4 prop. using all the required materials such as cement, jelly etc., complete including erecti...

Laying and jointing of MS pipes and specials for suction & delivery connections of the pump using suitable size bolts, nuts, packing etc., complete including fixing foot valve, all types of valves, ga...

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using WoodenAluminum Rollers as directed by the departmental staff main side cable

3.5X 120 sqmtm UG cable 2run for Submerible pumps...

LAYING IN G.I. PIPE: Running the cable in 2.9 mm thick 100mm GI pipe above the grand using all the required materials such as GI pipe clamps, bolts, nuts, washers etc., for fixing the GI pipes to the ...

Laying of load side cable Running the cable in existing ducts including properly securing cable in position etc., complete using all the required materials etc., complete 3.5X 120 sqmtm UG cable for ...

capacitor cable

3.5X 50 sqmtm UG cable for Submerible pumpset

Cable Terminations: Termination of cable using Alluminiumcopper lugs to the terminal end for solderless crimping to aluminimum conductors by adopting crimping tool 3X120sqmtm 1.1 KV Class cable main ...

3X50 sqmtm 1.1 KV Class cable capacitor cable for Submerible pumpset

240 sqmtm, 3.5 Core, 30 GI Strips 4 x 0.8 mm for Submerible pumpset

70 sqmtm, 3.5 Core, 18 GI Strips 4 x 0.8 mm for Submerible pumpset

25 sqmtm, 4 Core, 13 GI Strips 4 x 0.8 mm for Submerible pumpset

Laying of cable in Existing TrenchGI pipeStone WareRCC Hume pipe using

WoodenAluminum Rollers as directed by the departmental staff for Submerible pumpset

35 to 95 sqmtm for Submerible pumpset

120 to 240 sqmtm for Submerible pumpset

Heavy Duty Copper Terminal Long Barrel

25 sqmtm Copper Terminal, Apprx Wt: 11 Gm for Submerible pumpset

Installation of Pre Insulated Lug CPTAU for 25 sqmtm for Submerible pumpset

70 sqmtm Copper Terminal, Apprx Wt: 38 Gm for Submerible pumpset

Installation of Pre Insulated Lug CPTAU for 70 sqmtm for Submerible pumpset

150 sqmtm Copper Terminal, Apprx Wt: 98 Gm for Submerible pumpset

Installation of Pre Insulated Lug CPTAU for 120 sqmtm for Submerible pumpset

240 sqmtm Copper Terminal, Apprx Wt: 218 Gm for Submerible pumpset

Installation of Pre Insulated Lug CPTAU for 120 sqmtm for Submerible pumpset

Tool Kit: Supply and delivery at site best Tapariapr any other Board approved make and other reputed make tool sets for operation and maintenance of the above pumpsets comprising of the following.

Supply and installation of 2kg Fire Extinguisher Mono AmmoniumPhosphate Powder 50, Stored Pressure Type, Pressure Gauge, GrossWeight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter108MM, Disch...

Supplying of first aid box. complete

Supplying of FIRST AID CHART with lamination. Complete

Supply and installation of 1kg Stored Pressure Type, Pressure Guage,Gross Weight 2.7 Kg, empty weight 1.7 Kg, Can Height 344MM, Diameter108MM, Discharge Time less than 8 Sees, Controllable discharge m...

Supplying and installation of RUBBER MAT 1mtr x 1mtr 1Omm thick.complete including cost of materials, labour, usage charges of machinerycomplete as per specifications. for Submerible pumpset

Rubber Hand gloves 15 kV, SEAMLESS Confirming toISS Sample to be verified for seamless before approval for electrical purpos for Submerible pumpset

CautionDanger Board for Submerible pumpset

Fixing Danger Board for Submerible pumpset

Servicing and commissioning: The pumpsets along with all other elecrical equipments and Vaccum pumpsets shall be serviced and commissioned in the presence of the Engineer in charge of work including t...

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Means Bituminous course 350 DI Pipe for Rising ma...

Dismantling of Concrete pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Means Concrete pavement350 DI Pipe for Rising mai...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution ligh...

Same as above for Depth exceeding 1.5 m, but not exceeding 3 m for Rising mains

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect l...

Providing Ductile Iron Push on special confirming to IS 9523:2000 ALL DI Flanged MJ Collar 350 mm dia for Rising mains

Providing Ductile Iron Push on special confirming to IS 9523:2000 ALL DI Flanged Bend350 mm dia 11.25 digree bend for Rising mains

Same as above for 350 mm dia 22.5 digree bend

Same as above for 350 mm dia 45 digree bend

Same as above for 350 mm dia 90 Digree Bend

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron DI conforming ti IS 1865 with the latest amendments and of grade GGG 4050, shaft ...

Same as above for 350 mm dia

Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 EN 1074 4. Body and bonnet of DI conforming to IS 1865 of...

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS 732...

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

Form work for centering

Steel Fabrication

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingweld...

Refilling available earth around trenchespipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including cleaning with mechanical Broom of road surface and spraying primer at the rate o...

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG 40 @ 3.3% by weight of mix, tr...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributer at the rate of 0.25 kgm2 on Granular surface for Rising mains

Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 5.2 per cent of mix an...

Construction of un reinforced plain cement concrete pavement using RMC M 30 grade with OPC @ 270 kgm3 and GGBS@ 90 kgm3 75:25 proportion as per approved mix design procedure and thickness as per des...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work. for: for Rising mains

Manufacturing, providing, trasporting, rolling, lowering, laying, jointing & testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS 732...

Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire ch...

Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI DI pipe as per the sketch . The cost is inclusive of all materials, i.e, rubber O rings, flanges, bolts and nuts, con...

Supply, Installation, Commissioning and Testing for receipt of readings to the Central Server at Cauvery Bhavan of GPRS GSM based Multi Track Ultrasonic Bulk Flow Meters to the inlet, outlet, feeder...

Construction of un reinforced plain cement concrete pavement using RMC M 30 grade with OPC @ 270 kgm3 and GGBS@ 90 kgm3 75:25 proportion as per approved mix design procedure and thickness as per des...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ONOFF Energy cross 3 with short circuit breaking capacity...

Supplyingway plastic gang box and fixing using necessary wooden rawlphill plugs and screws. 2 to 4 Way Gang Box 2 to 4 Way Gang Box for Rising mains

Supplying and fixingreplacing of 61632Amps electrical accessories on existing switch board. 6A SP Switch for Rising mains

Supplying and fixingreplacing of 61632Amps electrical accessories on existing switch board..6A Bell Buzzer 6A Bell Buzzer

Supplying & fixing of Porcelain fuse channel with cut out on existing woodenpanel using necessary nuts, bolts and washers. 16 A for Rising mains

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 12" x 1...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 Part 1 or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975 2core 10...

Supply of 16A Universal socket flush type. Group A for Rising mains

Labour charges for laying of 1.1 KV class UG cable in existing trench Gl pipe stoneware pipe on wall on pole as required. In existing trenchduct. 6 sqmtm to 16 sqmtm for Rising mains

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. In soil hard for Rising mains

Providing and laying in position 100mm dia stone ware pipe in existing trench for Rising mains

Supplying and fixing of class A medium duty GI pipe of wall thickness not less than 3.25mm on polewalldrain crossing with necessary clamping 38 arrangements for UG cable of 1.1 KV for Rising main...

Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumeninsulating compound complete with terminals, clamps, bolts, nuts and washers etc. for Ri...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick G1 pipe 2.5 mtr long buried in a pit... The pit shou...

GlCopper strips for grounding connections, using necessary fixing materials as required. for Rising mains

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS ...

Arranging 230 volts AC Power supply to flow meter from BESCOM Including payment of 2 MMD Charges and other charges. for Rising mains

Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution ligh...

Same as above for do In ordinarysoft rock without blasting Depth 1.5m to 3m

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of b...

Same as above for In Hard Rock blasting prohibited Depth 1.50m to 3m

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super ...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Same as above for For Form work

Same as above for Above 5 M upto 10 M height

Same as above for For Form work

Same as above for Above 10 M upto 15 M height

Same as above for For Form work

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Same as above for For form work

Same as above for 15 to 20 mtr

Same as above for For form work

Same as above for 20 to 25 mtr

Same as above for For form work

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour up to 25.0 Mtr Height for OHT

Providing and fixing M.S. ladder between landing 45 cms. wide using angle iron of size 65 mm x 65 mm x 8 mm and 20 mm M.S. bars at 25cms. centre to centre with necessary supports of same angle iron as...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...

Supplying and fixing DICI puddle flanges conforming to IS 7181 1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc. ...

Same as above for 200 mm dia

Same as above for 250 mm dia

Same as above for 350 mm dia

Providing, of DI flanged pipe conforming to IS 8329 : 2000 with latest amendments with Cement Mortar Lining CML with Portland Slag Cement as per IS 455:1989 PN 16 150mm dia for OHT

Same as above for 200mm dia

Same as above for 250mm dia

Same as above for 350mm dia

Suppling Ductile Iron Push on special confirming to IS 9523:2000 All Double Socket Duck Foot DI Bends.150mm dia for OHT

Same as above for 200mm dia

Same as above for 250mm dia

Same as above for 350mm dia

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron DI conforming ti IS 1865 with the latest amendments and of grade GGG 4050, shaft ...

Same as above for 200mm dia

Same as above for 250mm dia

Same as above for 350mm dia

Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 m. intervals for a height of 7...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

Providing 6 mm cement plaster with cement mortar 1:3 1 cement : 3 fine sand on concrete surface ceilings including rounding off corners wherever required smooth rendering, providing and removing sc...

Finishing walls with water proofing cement paint of required shade :New work Two coats applied @ 4.84 kg10 sqmt to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work two coats including a coat of approved steel primer but exclud...

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side top centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard ...

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to RCC structures like floor and walls of reservoirs, sewe, effluent and water treatment plants,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes m...

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super ...

Form work for centering

Steel Fabrication

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingweld...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settingout, shoring, strutting, barricading, caution ligh...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes m...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 1 cement : 6 coarse sand

Providing and laying in position Cement Concrete for all Foundation works. The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granitetrap...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingwelding joints, tying ...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 1 cement : 4 coarse sand inc...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 1 cement: 4 fine sand to brick masonry including rounding off corners wherever required smooth rendering, prov...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge. De...