Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹11.8 L+₹2.4 L (25.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
1 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER (AF) THOISE
GARRISON ENGINEER (AF) THOISE 19 FBSU, c/o 56 APO, PIN 937219
PROVN OF DISH WASH AND HAND WASH ROOM WITH SOAKAGE PITS FOR NO 2 AIRMEN MESS AT AF STN THOISE UNDER GE(AF) THOISE
2023_MES_587562_1
GEAF/T-44/2022-23
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER (AF) THOISE
As per tender document
7 documents required · 7 mandatory
₹500
GE AF Thoise
₹19,400
Yes
22 Aug 2023
30 Mar 2023
3 May 2023
30 Mar 2023
1 May 2023
8 Apr 2023
Amount
M&L for excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, laying of cable etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in soft soil, complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete type D2 1:4:8 (40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil, complete all as specified and directed by Engr-in-Charge.
M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils, complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles, Complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, Complete all as specified and as directed by Engr-in-Charge.
M&L precast cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) block masonary with solid blocks exc 10 cm in with and setting in cement mortar 1:4, Complete all as specified and as directed by Engr-in-Charge.
M&L rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth surface without using extra cement, Complete all as specified and as directed by Engr-in-Charge.
M&L for preparing new untreated plaster surface of walls and applying two coat of cement based paint etc, Complete all as specified and as directed by Engr-in-Charge.
S & F Mild steel flat sections Fe-410-W (Gde-E-250 Quality-B, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Complete all as specified and as directed by Engr-in-Charge.
M&L two coat of synthetic enamel paint over a coat of red oxide on newly steel surfaces of any description,over 10cm in width or girth including preparation of surface, Complete all as specified and as directed by Engr-in-Charge.
M&L Providing, cement concrete B1,1:2:4 in 20 mm graded crushed stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60 cm in height, copings, kneelers, apex stones,bed plates , kerbs not provided for watertroughs and the like includingweathering, slightly roundedor chamfered angles complete all as specified and directed by Engr-in-Charge.
S&F 0.63 mm thick Galvanised, corrugated mild steel shetting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275, etc complete all as specified and directed by Engr-in-Charge.
M&L Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) 25 mm thick,Complete all as specified and as directed by Engr-in-Charge.
M&L 100 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection and hard standing, finishing cement concrete surface even an smooth wothout using extra cement, Complete all as specified and as directed by Engr-in-Charge.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410W (Grade E- 250 ) Quality A, including for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete all as specified and as directed by Engr-in-Charge.
S&F 0.63 mm thick plain Galvanised, mild steel sheeting in ridges, hips, valley gutters, drip, straight flashings (length and girth as fixed) & fixed with L-type or J-type or cranked hook bolts in lieu of screw in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and as directed by Engr-in-Charge.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W (Grade E- 250 ) Quality A complete all as specified and as directed by Engr-in-Charge.
S&F 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new zinc (or galvanised) surfaces over 10cm in width or girth,not otherwise described to receive painting, by a coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of zinc crome, red oxide primer, in camuoflage pattern, etc complete all as specified and as directed by Engr-in-Charge. Note: Camouflaging pattern shall be approved and directed by GE.
S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type and washer in roof, wall complete all as specified and directed by Engineer- in - Charge.
M&L Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed by Engr-in-Charge.
S&F PUFF Insulated tank capacity 1000 Litres including hoisting and fixing in position and connecting with circulating pipes complete all as specified and directed by Engr-in-Charge.
M&L Ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F for Galvanised steel tubes, medium grade, 20 mm dia, complete all as specified and directed by Engr-in-Charge.
Supply and fixed sinks made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with waste coupling and pipe complete all as specified and directed by Engr-in-Charge.
S&F 15 mm dia Pillar taps, cast copper alloy with capstan heads chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set over rendering 10 mm thick in cm 1:4 and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.
M& L Non Skid ceramic joint free coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including15 mm thick screed bed in cm 1:4 in floors etc. set and joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge.
M& L Screed bed or bedding layer or layer of 1:4 mortar 20 mm thick for laying floor finishes complete all as specified and directed by Engr in Charge.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing. complete complete all as specified and directed by Engr in Charge.
S & F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, bottle trap 32mm dia.and waste cupling 32 mm dia. complete all as specified and directed by Engr in Charge.
M&L for PCC (1:2:4) Type B-1, Plain cement concrete with using 20mm graded aggregate in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth course, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, complete all as specified and directed by Engr in Charge.
Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for Drain cover . complete all as specified and directed by Engr in Charge.
Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed by Engr in Charge.
M&L for RCC (1:2:4) type B1 ( using 20mm graded stone aggregete) as in slabs supported on walls and the like complete all as specified and directed by Engr in Charge.
S&F for Galvanised steel tubes, mediam grade 15 mm dia with all fittings complete all as specified and directed by Engr in Charge.
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engr in Charge.
S & F CP Bib taps 15 mm dia, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr in Charge.
S & F for PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr in Charge.
S & F for PVC (SWR) pipes 110 MM bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr in Charge.
M&L for hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface using broken stones or boulders, complete all as specified and directed by Engr in Charge.
S & F for PVC (SWR) bends any radius 110 MM bore dia complete all as specified and directed by Engr in Charge.
S & F for PVC (SWR) junction single (single T) of bore dia 110 MM complete all as specified and directed by Engr in Charge.
S&F CP Stop valves,15 mm dia bore fancy type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in Charge.
M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and sketch fittings etc) and new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly for One light point/fan point controlled by one single pole one way switch complete all as specified and directed by Engr-in-Charge.
All as per BOQ Srl item No. 46.00 here-in-before but for One socket outlet on the same board controlled by one single pole 5 Amp switch complete all as specified and directed by Engr in Charge.
All as per BOQ Srl item No. 46.00 here-in-before but for One 5 amps socket outlet independent controlled by one single pole 5 Amp switch complete all as specified and directed by Engr in Charge.
All as per BOQ Srl Item No. 46.00 here-in-before but for One 15 Amps socket outlet controlled by one 15 Amps suitable wiring with 4.00 Sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductor with continuous earth wire of size 2.5 Sqmm PVC insulated FRLS, unsheathed,multistranded copper conductor cable complete all as specified and directed by Engr in Charge.
S & F Switch piano flush type 5 amps, one way duly ISI marked complete all as specified and directed by Engr in Charge.
S & F Switch socket combinationof 5 and 16 A flush type , one way ISI marked complete all as specified and directed by Engr in Charge.
S & F Socket outlet 3 pin,6 Amps, piano flush type duly ISI marked complete all as specified and directed by Engr in Charge.
S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked complete all as specified and directed by Engr in Charge.
S & F Lamp holder insulated body threaded dome pattern ,suitable for bracket / batten fitting complete all as specified and directed by Engr in Charge.
S&F T Bulb Curve , 12 Watt LED Base B22 Cool day Light complete all as specified and directed by Engr in Charge.
S&F LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.
Supply & Fix in repair sheet metal enclouser DB's 12 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed by Engr in Charge.
Supply & Fix in repair sheet metal enclouser DB's 6 way TPN double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed by Engr in Charge.
Supply & Fix MCB Triple pole(TP) 240 volts, 63 Amps, 10 KA complete all as specified and directed by Engr in Charge.
Supply & Fix MCB single pole neutral(SPN) 240 volts, 20 to 60 Amps, 10 KA complete all as specified and directed by Engr in Charge.
Supply & Fix MCB single pole(SP) 240 volts, 05 to 30 Amps, 10 KA complete all as specified and directed by Engr in Charge.
M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 25 Sqmm, 4 -core, laid in trenches or passing through pipes, including suitable lugs and accessories for making connections at both ends, complete all as specified and directed by Engr in Charge.
M&L for PCC cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid Flat in trenches over the cable with length 250mm perpendicular to the direction of cable, adjacent/ abutting each other complete all as specified and directed by Engr in Charge. Note:-Excavation and earth work to be measured and paid for separately
M&L for Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed by Engineer-In-Charge. Note: Punned thickness of 18 cm shall be measured for payment purpose only.
M/S GHULAM MOHAMMAD CHATAPA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .