REPAIR REPLACEMENT TO CEILING FAN EXHAUST FAN AIR CIRCULATORS HOT WATER APPLIANCES AND OTHER CONNECTED ITEMS UNDER AGE EM WEST OF GE W AGRA

Amount

Taking down water heater (Geyser) of capacity 25/35/50 Ltrs for replacement & refixing in original location duly replacement as directed by Engineer-in-charge of any make after disconnecting all electric connections including hot and cold water connections, and painting / numbering at site etc Note :- Replacement work and painting / numbering will be measured and paid separately under appropriate item here-in- after.

Labour for disconnecting assembly of Geyser 25 Ltrs capacity, any make/ shape, inspecting the serviceability state of all parts and carry out complete descaling of all serviceable parts such as inner tank, geyser assembly, thermostat, heating element etc with cleaning rod, brush or cleaning solution (chemicals) or any other suitable method and reassemble the geyser complete including replacing the unservicable parts with new parts to make the geyser serviceable complete all as specified & directed.

All as per item No. 2 above but Geyser of 35 Ltrs capacity.

All as per item No. 2 above but Geyser of 50 Ltrs capacity.Note for item No. 02 to 04 :- Replacement of any un-serviceable parts required for making the geyser serviceable shall be measured and paid separately under respective item here-in-after as supply only.

Supply only steel inner tank for 25 Ltrs capacity with any number of holes for fixing under item No. 2 here-in-before complete as specified and directed.

Supply only steel inner tank for 35 Ltrs capacity with any number of holes for fixing under item No. 3 here-in-before complete as specified and directed.

Supply only steel inner tank for 50 Ltrs capacity with any number of holes for fixing under item No. 4 here-in-before complete as specified and directed.

Supply only cover outer complete including top and bottom suitable for 25 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 2 here-in-before complete as specified and directed.

Supply only cover outer complete including top and bottom suitable for 35 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 2 here-in-before complete as specified and directed.

Supply only cover outer complete including top and bottom suitable for 50 Ltrs capacity geyser of any make, shape & size as per existing but gauge of sheet not less than 22 SWG for fixing under item No. 2 here-in-before complete as specified and directed.

Supply only geyser assembly with Rubber gasket 5 mm thick of copper, 6 holes suitable for 25 ltrs capacity geyser complete as specified and directed.

Supply only geyser assembly with Rubber gasket 5 mm thick of copper, 9 holes suitable for 35/50 ltrs capacity geyser complete as specified and directed.

Supply only Heating element 2000 watts rating operated on 220 volt AC in round/tringle shape with rubber gasket complete as specified and directed.

Supply only Heating element 1500 watts rating operated on 220 volt AC in round/triangle shape with rubber gasket complete as specified and directed.

Supply only Thermostat rating operated on 220 volt AC suitable to adjust the temperature from 0º C to 80º C complete as specified and directed.

Supply only heat resistant rubber ring of existing size to the lower and upper housing of geyser, any make / size complete as specified and directed.

Supply only Air release valve (weight type) complete as specified and directed.

Supply only fusible plug type air release valve complete as specified and directed.

Supply only Neon Indicator lamp of round/rectangular shape / size / colour complete as specified and directed.

S&F in replacement galvanized iron nuts, bolts and washers (not exceeding the size 50 mm x 6mm) or existing size complete all as specified & directed

S&F in replacement 15mm dia stop cock, cast copper alloy, out side thread, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified & directed.

S&F in replacement bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in replacement PVC connection 15mm bore, 450mm long in any position with both end brass nut with inner threading and washer suitable for cold water connection complete all as specified & directed.

S&F in replacement heavy duty heat resistance PVC connection 15mm bore, 450mm long in any position with both end brass nut with inner threading and washer suitable for Hot water connection complete all as specified & directed.

S&F in replacement fastener mild steel 100 mm long x 10 mm dia with pin and bolts complete for hanging of geyser and making good the disturbed surfaces including plastering and white washing complete all as specified & directed.

S&F in replacement 15mm bore 'medium grade' galvanized iron tubing with all fittings fixed on walls, ceiling or laid in floors complete all as specified and directed.

S&F in replacement 20mm bore 'medium grade' galvanized iron tubing with all fittings fixed on walls, ceiling or laid in floors complete all as specified and directed.

S & F in replacement metal plug top 20 Amp complete all as specified and directed.

S & F in replacement metal plug socket 20 amp complete all as specified and directed.

S&F in replacement 3 Pin plug top, 15/16 Amps, ISI marked 230 volts fixed on geyser complete all as specified and directed. Make :- Anchor/ Cona/ Havells

Taking down carefully ceiling fan/exhaust fan/wall mounting fan any height of bldgs, type and size for replacement and re-fixing in same or in other location or depositing to MES store yard of AGE E/M(W) complete all as specified and directed.

M&L for making good surface body by painting (one coat) of ceiling fan main complete body with blade & down rod by spray painting with synthetic enamel white paint complete all as specified and directed.

M&L for strip opening of unsv fan of any type and size identify the defect, over hauling by removing dust from field coil, armature, providing lubrication, greasing on bushes and bearings for smooth running complete with and including replacement of unserviceable parts such as screw, check nut, washer, split pin, lock nuts, connectors, Gun metal bushes/ rubber reel/bearings including jointing, soldering of wire, reassembling the fan and checking it mechanically and electrically for its proper functioning and smooth running etc complete all as specified and directed. Note : Gun metal bushes, bearings of desired size will be measured and paid under relevant items here-in-after.

M&L for rewinding of ceiling fan of size 1200mm to 1400mm sweep fans AC single phase any make, model with supper enameled copper winding wire of existing size and turns & applying proper insulating material such as varnish, cotton tape and fiber sleeves etc complete all as specified and directed.

All as per item No 34 above but Exhaust fan 225mm to 300mm sweep

All as per item No 34 above but Exhaust fan 375mm to 450mm sweep

All as per item No 34 above but Table fan/Pedestal fan/Air circulator Fan of sweep 400mm

Supply only gun metal bush for any type and size of fan as per existing specifications complete all as specified and directed.

Supply only ball bearing No. 6201

Supply only ball bearing No. 6202

Supply only ball bearing No. 6203

Supply only ball bearing No.L-5 6000

S & F in replacement rubber reel of suitable size for ceiling fan complete all as specified and directed.

S & F in replacement capacitor of 2.5 MFD capacity suitable for fan complete all as specified and directed.

S & F in replacement capacitor of 6 MFD capacity suitable for fan complete all as specified and directed.

S & F in replacement mild steel clamp for holding ceiling fan with nut, bolt & split pin etc complete all as specified and directed.

S & F in replacement flexible cord twin core copper wire of size 0.5 Sqmm for fans from ceiling rose to fan and connecting up complete all as specified and directed.

S & F in replacement canopies (upper & lower) set of 02 Nos with locking screw of ceiling fan any type/size/model of fans complete all as specified and directed.

S & F in replacement blades of required size/model duly balanced and painted (factory made) suitable for ceiling fan size 1200mm to 1400mm complete all as specified

S & F in replacement 15mm dia and 450 mm long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed.

S & F in replacement 15mm dia and 1000mm long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed.

S & F in replacement 15mm dia and exceeding 1 mtr & not exceeding 2 mtr length long GI light grade down rod for ceiling fan duly drilled holes, split cutting as directed including painted all as specified and directed.

S&F in replacement fan hooks of length 30 to 45 cm long fabricated from MS flat of size 40x6mm including nuts, bolts and washer suitable for fixing on structural steel trush/ hoding trush as applicable at site. complete all as specified and directed.

S&F in replacement iron metal body air vantilating fan 300mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed.

S&F in replacement PVC body fresh air circulating fan with PVC louvers of size 225 mm to 300 mm sweep, 230 volts, 50 Hz, including connecting from ceiling rose to fan connector complete all as specified and directed.

Material and labour for making hole in wall of size 225 mm to 300 mm dia for fixing of exhaust fan and making good the disturbed surface as per existing complete all as specified and directed.

Taking down desert cooler of any capacity/ make and in any position from site and re-fixing the same in existing location after necessary replacement/overhauling work/ painting etc complete all as directed. Note:- replacement/ overhauling / painting will be measured and paid seperately.

M&L for cleaning the inside & outside surfaces of steel body desert cooler till clean and clear smooth surfaces and after prepration of serfaces painting the inside serfaces with & including one coat of red oxide primer and painting of outside surfaces with & including one coat of synthetic enamel paint and oiling and greasing of fan kit/ exhaust fan and pump motor and replacement of unserviceable worn out nuts, bolts and washer complete all as specified and directed.

S&F in replacements, new wood wool pad covered/ packed by GI wire mesh suitable for desert coolers any size complete all as specified and directed.

S&F in replacements, new submersible pump motor 40 watt to 60 Watt discharge 3800 to 4500 Ltrs per Hrs at 2.5 feet head suitable to operate at AC 230 volts single phase supply suitable for desert cooler complete all as specified and directed. Make :- Kheitan/ Bansal/ Universal

M&L for taking out the burnt winding of exhaust fan of 375mm to 450 mm sweep from desert cooler and rewinding the same with and including superior quality enameled copper winding wire of existing gauge and No of turns including proper insulation with top quality insulating material such as varnish, glass paper, sleeves, cotton tape and replacement of gun metal bushes/ bearingas and re-fixing the same into its original position and testing on completion complete all as specified and directed.

M&L for replacement of rusted/ worn out exhaust fan kit with blade of size 375mm to 450 mm sweep of minimum 90 watt copper bound suitable for fixing in desert cooler with mounting 04 Nos steel strips complete all as specified and directed.

S&F in replacements, capacitor of 4 MFD capacity suitable for desert cooler complete all as specified and directed. .

S&F in replacement 3 Pin plug top, 5/6 Amps, ISI marked 230 volts fixed on desert coolers complete all as specified and directed. Make :- Anchor/ Cona/ Havells

Supply and fixing of water proof ply wood 6mm thick in replacement, cut to shape as required and fixed on wall/ window/ cooler opening with and including necessary nuts & bolts/ screws with gully etc complete all as specified and directed.

Supply & fixing of desert cooler's body in replacement, over all size 0.75Mx0.75Mx0.88M having tank size 0.75Mx0.75Mx0.20M made out of 22 gauge PGI sheet by means of fabrication welding/ rivet jointing with and including front grill of size 0.46Mx 0.46M alongwith provn for air flow direction, 03 Nos perforated side panels of size 0.68Mx0.61M of each including wood wool pads not less than 3.50Kg/ Sqm with and including provn for water flow from tank to pads i.e PVC flexible/ hard pipes of required sizes alongwith necessary PVC fittings but excluding submersible pump and also having electric control panel consisting of two nos 5 Apms switches, one no rotary type speed regulator switch complete all as specified and directed.

M&L for in replacement of rusted/ worn out exhaust fan kit with blade of size 375mm to 450 mm sweep of minimum 90 watt, 230 volt copper bound suitable for fixing in desert cooler with mounting 04 Nos steel strips complete all as specified and directed.

Supply & fixing of PVC front grills of desert coolers in replacement of existing size with and including piano type switch complete all as specified and directed.

jmd engineers

M/S NAVIN & ASSOCIATES