Repair/replacement and rewiring of internal electrification to Md and OTM accn of 159 GH, 21 Raj Rif, SHO(L), 104 AD Regt and under GE (East ) Ferozepur Cantt

Amount

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed.

Taking down unserviceable and serviceable tube light fittings/ Ceiling light fittings/ Bldg security lights of any type carefully, old serviceable tube light fitting complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed.

Taking down/ disconnecting carefully old unserviceable services connection from poles and DBs of any size complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as specified and directed.

Dismantling house service brackets of any type or size from wall upto 3-5 mtrs height including GI anchor/ guy wire complete all as specifed and directed.

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.

All as per item No. 07 above but one 3 pin, 5 Amp, socket outlet on the independet board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 07 as above but one 3 pin 5 Amp, socket outlet point on the same board controlled by one single pole one way switch complete all as specified and directed. Note for item No. 07 to 09 : The rate of cutting chase for conduits and making good to existing surface wall are included in quoted rates where ever applicable or required at site.

All as per item No. 07 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 5/16 Amps socket out let on independent board complete all as specified and directed. Note : The rate of cutting chase for conduits and making good to existing surface wall are included in quoted rates where ever applicable or required at site.

All as per item No. 07 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 5/16 Amps socket out let on independent board complete all as specified and directed. Note : The rate of cutting chase for conduits and making good to existing surface wall are included in quoted rates where ever applicable or required at site

All as per Item No. 07 as above but copper cables drawn through existing PVC/ Steel conduit and accessories and in existing sunken boxes for One light/ Fan/ Bell point controlled by one single pole one way switch complete all as specified and directed.

All as per Item No. 07 as above copper cables drawn through existing PVC/ Steel conduit and accessories and in existing sunken boxes for One 3 pin, 5 Amp, socket outlet on the independet board controlled by one single pole one way switch board complete all as specified and directed.

All as per Item No. 07 as above here-in-before but copper cables drawn through existing PVC/ Steel conduit and accessories and in existing sunken boxes for One 3 pin, 5 Amp, socket outlet point on the same board controlled by one single pole one way switch complete all as specified and directed.

All as per item No.10 as above but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire drawn through existing PVC/ Steel conduits, accessories and existing sunken boxes for one 6 pin 5/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No.10 as above but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire drawn through existing PVC/ Steel conduits, accessories and existing sunken boxes for one 6 pin 5/16 Amps socket out let on independent board complete all as specified and directed.

S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14121 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14123 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14401 or equivalent in Plaza/ INDOASIAN.

S&F Socket outlet 2 in 1, 5 pin, 6 Amps, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14119 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-14307 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39040 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make - Anchor, Model- Penta Cherry, Cat Part No-39527 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified. Make - Anchor, Model- Penta PC, Cat Part No-14502 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F LED 20 W LED 6000 K, indoor E-Lite LED Curve with wide angle profile High lumen batten with efficacy of 100 Lumens, energy efficient fixed to wall/ ceiling etc complete. Make-Havells, Model-E-Lite LED Curve (LHEXBXPNIN1W020) or equivalent of Philips/ C&S.

Refixing only T/L fittings complete all as specified and directed. Note: Old T/L fittings as retrived from taking down shall be re-used.

S&F LED 18 W LED 6000 K, indoor E-Lite LED Green decorative ultra slim round profile LED lighting fixture with co extrudede polycarbonate body, environmental friendly, energy efficient fixed to wall/ ceiling etc complete. Make-Havells, Model - E-Lite LED Green (LHEXBLP7UN1W018) or equivalent of Philips/ C&S/ Crompton as approved by GE

S&F LED bulb of 10 watt all as specified and directed. Make-Havells, Model No-LED ADORE 10 W B22 CDL 3 STAR LAMP or Equivalent make as approved by GE

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed. Make-Anchor, Model- Rose Mary Ding Dong, Cat Part No-8294 or equivalent in Plaza/ INDOASIAN as approved by GE

S&F Recess and surface mounting LED flat panel 2'x2' made of CRCA sheet duly powder coated with high efficient LEDs & glare free full opal diffuser IP20 of 36 W. Make-Crompton, Model-LED TROFFER 36 W, Cat Part No. LCTLRNE-36-CDL or equivalent Havells/ Bajaj as approved by GE

S & F bldg LED Security light fittings 25 watts including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make- Crompton, Model-ASTRA, Cat Part No-LSTS-25-CDL or Equivalent of Havells/ Bajaj as approved by GE

S & F bldg LED Security light fittings 15 watts including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed. Make- Crompton, Model-ASTRA, Cat Part No-LSTS-15-CDL or Equivalent of Havells/ Bajaj as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made, including thermal based release adjustable type 4 pole 100 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified. Make- INDOASIAN, Cat Part No-811888 or equivalent in Legrand/ Schneider as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified. Make- INDOASIAN, Cat Part No-811806 or equivalent in Legrand/ Schneider as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified. Make- INDOASIAN, Cat Part No-811807 or equivalent in Legrand/ Schneider as approved by GE

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 12 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour and shade, complete all as specified and directed. Make- INDOASIAN, Cat Part No-811808 or equivalent in Legrand/ Schneider as approved by GE

S&F MCCB Thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 10 KA including testing, complete all as specified and directed. Make- INDOASIAN, Cat Part No-830708 or equivalent in HPL/ C&S/ Legrand/ Schneider as approved by GE

S&F MCCB Thermal based release adjustable type 4 pole 63 Amps 50 Hz 415 Volts with rupturing capacity 10 KA including testing, complete all as specified and directed. Make- INDOASIAN, Cat Part No-830706 or equivalent in HPL/ C&S/ Legrand/ Schneider as approved by GE

S&F MCB SPN, 63 Amps, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified. Make- INDOASIAN Cat Part No-811154 or equivalent in Legrand/ Schneider/ HPL as approved by GE

S&F MCB SP, 06 to 32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified. Make- INDOASIAN Cat Part No-811015 or equivalent in Legrand/ Schneider/ HPL as approved by GE

S&F Sub main wiring with two single core 2x10 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4 sqmm drawn in and including 25 mm bore PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as one unit length).

S&F Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4 sqmm drawn in and including 25 mm bore PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as one unit length).

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 2.5 sqmm drawn in and including 25 mm bore PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as one unit length).

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm complete all as specifed.

M&L for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends M.S. hook and stay or guy complete all as specifed and directed.

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified and directed Make-Gloster/ Havells/ Finolex/ Universal Cables as approved by GE

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, compete all as specified and directed.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. (Excavation and earth work shall be measured and paid separately). Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work shall be measured and paid separately).

Returning, filling in, earth including spreading, leveling watering and well ramming in layers, each not exceeding 25cm thick each layer, complete all as specified and directed.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and directed

S&F Electronic ballast pre wired AC supply 230 V 50 Hz suitable for 36 watt tube light fittings ISI marked complete all as specified and directed. Make - Havells Cat Part No-LHGEAFBBDPA1036 or equivalent in Wipro/ CG/ Bajaj as approved by GE.

S&F fluorescent tube rod 36/40 watt ISI mark. complete all as specified and directed. Make - Havells, Cat Part No-LHLFDLCENL70036 or equivalent in Wipro/ CG/ Bajaj as approved by GE

M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh for watering . Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit including necessary execution and earth works, PCC chamber in Cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate and RCC type B-1 using 20 mm graded crushed stone aggregate cover and complete all as shown in electrical plate No.3 of MES schedule (Part-I) of 2009 complete all as specified and directed.

KAILASH CONSTRUCTION COMPANY

M/s S B Construction Company

M/s Surjit Singh and bros

M/s Manoj Construction Co.

JAWAHAR CONSTRUCTION COMPANY

Ms Hari Singh

CHETAK CONSTRUCTION COMPANY

HAPPY ELECTRICALS