GE(W)/HSR-30/2024-25 SPL REPAIR OF OR BATHROOM TOILET OF BLDG NO P-637 PROVN OF NEW GENERATOR SHED AND SECURITY POST AT MAIN GATE

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete all as specified and directed.

M&L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm width or girth complete all as specified and directed.

S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors, ladders, frame work for securing water tank, cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.

M&L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 30 mm thick factory made solid PVC Moulded Door Shutter with Wood Free EPS, with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front & back face and all as specified in SSR and complete all as specified and directed.

Providing & fixing double rebate ventilators fabricated from roll framed sections made of galvanised steel colour coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms /Sqm )with total coated thickness of 0.60 mm complete all as specified and directed. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections: sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section should be joined with frame / mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accessories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,seccolor Handles & seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame. Solid square guard bars shall be provided between glazed shutter and mesh shutter and the same shall be measured and paid separately, the above said rates are inclusive of 5mm thick plain float glass &SS wire mesh Note:- if one ventilation has two or more sub partitions then half or more than half of the ventilators shall be double rebated openable and remaining shall be fixed type and all as specified and directed as per ground requirement.

Providing & fixing double rebate openable windows fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 wit Zinc of 120 gms /Sqm )with total coated thickness of 0.60 mm complete all as specified and directed. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section shoulb be joined with frame / mullion using mullion cap Ethyl Propylene Danien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,sector Handles & seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame. Solid square guard bars shall be provided between glazed shutter and mesh shutter and the same shall be measured and paid separately. the above said rates are inclusive of 5mm thick plain float glass &SS wire mesh.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick Prelam PVC sheet reinforced with MS square tube fixed in opening incl 3 nos 75 mm SS Hinges as per specifications and making good the plaster of wall in CM 1:6 complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles ,fabricated type complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for 50 mm long floor door stopper of aluminium alloy body and ongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 200mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate in repair complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match and complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

Demolition of cement concrete in floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

Supply only liquid type water proofing compound complete all as specified and directed.

Treatment of sunken floor slab compraises of the following specifications and complete all as specified and directed. :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy putty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and directed by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.

M&L cement concrete 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with and incl bitumen and sand 1:3 by weight complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair face of brick walls/ concrete surfaces and finished even and fair complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair face of brick walls / concrete surfaces external surfaces of any description mixed with WPC @ 200ml per 50 Kg bag of cement used and finished even and smooth w/o using extra cement complete all as specified and directed.

M&L 10mm thick rendering in CM (1:3) on concrete surfaces of ceiling complete all as specified and directed.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed.

M& L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

S&F Vitreus china wash down water closet pan (Padestal pattern) while excluding fixing bolt, flushing cistern, flushing pipe and inclusive of plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and jet spray complete all as specified and directed.

S&F in repair, PVC Low Level Cistern 10 ltr capacity, valveless, syphonic action type with float ,handle, including 32mm dia pipe of polyethylene of low or high density or PVC & bracket complete all as specified and directed.

S&F10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including PVC 'P' or 'S' trap and connection to trap including cement concrete, with PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern etc. including making good to floor, complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half Stall type complete including providing and fixing Plugs, Bedding urinal against wall in cement mortar 1:2 securing urinal t plugs with and including 60 mm long brass screws , pointing around urinal back in cement , fixing automatic flushing cistern with brackes flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern , trap , waste pipe complete all as specified and directed.

S&F vitreous China urinals, full stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Vitreous China Urinal partition white of Size 310 x 700 mm in repairs and complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified & directed.

S&F, 110mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and directed.

S&F, 110mm dia PVC bend of any radius including benching in Cement concrete 1:3:6 where required and finishing, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F, PVC Nahani trap 75mm bore with grating includiing jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & SS Peg Set of 6 , Solid Body, 200 mm to 300 mm length and complete all as specified and directed.

S/F in repair brass chromium plated waste coupling 32mm dia complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 600mm long complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm dia, Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S/F in repair PVC waste pipe for 32 mm dia of standard length complete all as specified and directed.

S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all as complete all as specified and directed.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade with concealed including taking down of existing pipe line complete all as specified and directed.

M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade with concealed including taking down of existing pipe line complete all as specified and directed.

S&F in repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn, cast copper alloy fancy type chromium plated and fixed complete all as specified and directed.

S&F 15mm dia chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair 15 mm dia CP Conceled Stop Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore all as complete.

S&F Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified

S&F 15mm dia chromium plated fancy type Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F Soap dish, Stainless steel, fixed to plugs with chromium plated brass screws complete all as specified

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified

Supply and fixing rotional molded polythylene water storage tank three layer white 500 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified

S&F Rotational Moulded polyethylene Water Storage Tanks Three layers in white colour (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified incl Dismantling/ Demolition of existing tank of any type complete all as specified and directed.

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms).complete all as specified

S & F gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for Brick work with Fly Ash bricks straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 complete all as specified and directed.

M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete and all as specified and directed.

M&L for coloured Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set jointed and in greyy cement and pointed with pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

M&L 75 mm thick Cement concrete Type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed.

M&L 100 mm thick Cement concrete Type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork In cement concrete 1:2:4, type B-0 complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 150 mm dia complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for concrete bed to drain pipes including forming cradles for 150mm dia pipe complete all as specified and directed.

S & F RCC Class NP 2, 150 mm bore pipes laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation/ filling/ mass complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, beams, lintels etc, removing all loose rust / scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars / IRC fabric 50mm x 50mm x 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : The cost of IRC 50mm x 50mm x 12 gauge or reinforcement bars shall be measured and paid separately.

Removing all disintegrated and loose concrete of any thickness including plaster if any in roof slab, removing all loose rust / scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars / IRC fabric 50mm x 50mm x 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : The cost of IRC 50mm x 50mm x 12 gauge or reinforcement bars shall be measured and paid separately.

Supply only IRC 50mm x 50mm x 12 gauge weld mesh cut to length bend to shap required and tying with and including annealed mild steel wire not less than 0.9mm or fixing with galvanised steel staples fixed to steel members with nut and bolt or fixed to RCC work or ceiling surfaces complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.

S&F TMT bars 8mm dia and over up to 10mm dia in stirrrups, spaeers and binders etc complete all as specified and directed.

S&F TMT bars 5mm dia and over up to and including10mm dia in stirrrups, spaeers and binders etc complete all as specified and directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, RCC water Tanks ,landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) as in frame for sheeting in chajjah complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps,staircase treads and risers,landind area jambs,pillars,window-cills, cooking plateform, and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed.

M&L Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/Loose soil complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed.

Preparing new surfaces of steel of any description, over 10cm in width or girth,and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&LPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

M&L 75mm thick Cement Concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L Formwork to chullah hoods, chajjas troughs and similar items including edges complete all as specified and directed.

M&L RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L RCC M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC M-25 in Chajjas, complete all as specified and directed.

S&F Steel window (Box type) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Figured glass, pin head type, 3mm thick and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with e 410 -W (Gde-E- 250) complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Steel ventilator (Box type) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Anodised aluminium snap grid (605x605mm) frame work for false ceiling complete all as specified and directed.

M&L Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceiling complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

All as per item No 136.00 but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

All as per item No 166.00 but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

All as per item No 136.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F i Sheet metal enclosure distribution board SPN, 8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

S&F i Sheet metal enclosure distribution board SPN,4 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 16 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

M & L for Sub main wiring alongwith earth wire with the 2 x 6.0 sq.mm + 1 x 6.0 sq.mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and as directed. Note:- Three length of coppper wire will be considered as one unit.

M&L for providing/cutting the round/ square hole of reqd size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type ac ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as specified.

S&F PVC insulated 10 Sqmm 2 core service wire complete all as specified and directed.

Shiva Constructin Co. (BID ID -3067467)

moti construction company (BID ID -3059968)

NAVIN KUMAR (BID ID -3069132)

SHRI HARI BUILDERS (BID ID -3060914)

Siya constructions (BID ID -3068956)