Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC | L1 | Accepted-AOC RATES ARE FOUND REASONABLE AND THE FIRM BEING L1 BIDDER | |
| 2 | L2₹37.7 L+₹1.4 L (3.73%)Rejected-Finance P O RANGIA WARD NO 3 DIST KAMRUP ASSAM | KAMRUP | ASSAM | 781354 | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹38.8 L+₹2.5 L (6.85%)Rejected-Finance T50 H NO T 50 NANGLI RAJAPUR NIZAMUDDIN EAST NEAR ISBT SARAI KALE KHAN SOUTH DELHI SOUTH DELHI DELHI 110013 UDYAM DL 08 0028221 | SOUTH EAST DELHI | DELHI | 110013 | L3 | Rejected-Finance BEING L3 BIDDER |
Tender Value
₹35.5 L
EMD Value
₹71,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RANGIA
GE Rangia C/O 99 APO Rangia
ADDITION/ALTERATION TO BUILDING NO. ET-169 AND OTHER SANCTIONED WORKS AT RANGIA MILITARY STATION UNDER GE RANGIA
2022_MES_557020_1
8588/E8
Open Tender
Civil Works
Item Rate
180 days
RANGIA
AS PER NIT
9 documents required · 9 mandatory
₹500
GE RANGIA
₹71,000
Yes
7 Dec 2022
11 Oct 2022
9 Nov 2022
11 Oct 2022
7 Nov 2022
26 Oct 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as per specified and as directed by Engineer-in-charge.
Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings or wall cladding, complete all as specified and as directed by Engineer-in-charge.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed by Engineer-in-charge.
Dismantling Unframed timber scantlings 40 Sqcm and over in section and in any position, complete all as specified and as directed by Engineer-in-charge.
M&L for 2nd class hard wood in scantling wrought timber unframed and fixed, complete all as specified and as directed by Engineer-in-charge.
M&L for 50 mm thick 2nd class hard wood boarding supplied and fixed with nails in any situation (except flooring and skirting) plained both sides, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer of any description, over 10cm in width or girth, not otherwise described, complete all as per specified and as directed by Engineer-in-charge.
Dismantling boarding, any description fixed in any position with nails, complete all as specified and as directed by Engineer-in-charge.
S&F coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300 x 300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shades of tiles over 15 mm thick screed bed or bedding layers in CM 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for Coloured Glazed ceramic tiles surface 300 x 450 x 7mm to 8 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick screed in CM (1:4), complete all as specified and as directed by Engineer-in-charge.
M&L for forming construction joint 30 mm deep x 10 mm wide filled with sealing compound grade "A", complete all as specified and as directed by Engineer-in-charge.
S&F in repair galvanized mild wire wire cloth 0.63 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete all as specified and as directed by Engineer-in-charge. .
Taking down chowkhats incl shutterrs not exc. 1.5 sqm, complete all as specified and as directed by Engineer-in-charge.
S & F solid PVC door frame of size 50x47mm made out of 5 mm singke side prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube, supplying & fixing in opening as per specification and drawing, complete all as specified and as directed by Engineer-in-charge.
S&F Factory Made Solid PVC moulded Door Shutter (with wood free EPS) 28 to 30mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam sheet on the front face and 2mm prelam PVC sheet on back face Complete as per direction of Engineer-in-charge, manufacturer's instruction and drawing, complete all as specified and as directed by Engineer-in-charge.
S&F 125mm long aluminium handle, cast type, anodised, complete all as specified and as directed by Engineer-in-charge.
S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F 250mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate, complete all as specified and as directed by Engineer-in-charge.
S&F 125 mm Butt hinges medium weight cold rolled mild steel and fixed, complete all as specified and as directed by Engineer-in-charge.
S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site, complete all as specified and as directed by Engineer-in-charge.
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening, complete all as specified and as directed by Engineer-in-charge.
S&F 100 mm long aluminium handle, cast type, anodised, complete all as specified and as directed by Engineer-in-charge.
S&F 100 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed, complete all as specified and as directed by Engineer-in-charge.
Demolition & bracking up 75/100mm bore AC/CI/PVC pipe set in cement mortor, complete all as specified and as directed by Engineer-in-charge.
S&F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed by Engineer-in-charge.
S&F 110mm bore P.V.C (S.W.R) bend, complete all as specified and as directed by Engineer-in-charge.
S&F 110mm bore P.V.C vent cowl, complete all as specified and as directed by Engineer-in-charge.
S&F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed by Engineer-in-charge.
S&F 32 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed by Engineer-in-charge.
M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landings, steps, cills, sunshades, shelves and lintels etc; and cutting chases for concealed water tubing and making good, cutting not exceeding 10 cm girth, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs viterious china wash down water couple closet size 760x360x635 mm tap distance S-220 mm including making good to floor.incl seat cover, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15mm bore basin mixer fancy type cast copper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15 mm bore brass CP wall mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses) arrangement screwed down for iron pipe & fixed, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs cromimum plated hand shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs connection 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15mm bore fancy type chromium plated two way bib taps with crutch or butterfly handle screwed down for iron pipes, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15 mm bore stop valve cast copper alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs vitreous china wall hung wash basin white, size 200x550x400 mm excluding taps, waste, but including barkets with pedestal, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs corner glass shelves with border to hold the bathing kit minimum width 150 mm and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Aluminium Door closer hydraulically regulated, designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg, complete all as specified and as directed by Engineer-in-charge.
S&F in repair health faucet with 1.00 mtr tube and hook, complete all as specified and as directed by Engineer-in-charge.
S&F in repair tubular towel rail 20 mm dia with brass chromium plated, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed by Engineer-in-charge.
S&F 15 mm bore GI water tubes medium grade with all necessary fitting fixed in walls/floor etc., complete all as specified and as directed by Engineer-in-charge.
S&F 20 mm bore GI water tubes medium grade with all necessary fitting fixed in walls/floor etc., complete all as specified and as directed by Engineer-in-charge.
S&F in repair double layered 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F PVC 20mm ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 20mm- 210 gms) and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Soap dish of size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed by Engineer-in-charge.
S&F in repair brass CP shower rose of size 125 mm swivel type fix to iron pipe, complete all as specified and as directed by Engineer-in-charge.
M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge.
M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge.
Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-charge.
S&F second class hard wood plain fillets in rectangular tringular in section, of sectional area exc. 6sqcm but not exc.13 sqcm, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, not exc. 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and as directed by Engineer-in-charge.
S&F in patches not exc. 0.50 sqm G.I. Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work built in cement mortar including all quions, arches pillars etc., complete all as specified and as directed by Engineer-in-charge.
M&L for 40 mm thick Damp Proof Course in cement concrete 1:2, Type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed by Engineer-in-charge.
M&L brick work using FLY ASH bricks curved or straight in plan exc 6 mtr mean radius in cm (1:6), complete all as specified and as directed by Engineer-in-charge.
M&L 10mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth w/o using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L for preparing new plastered surface of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-charge.
M&L for two coats of cement base paint over a coat of primer including preparation of new surfaces, complete all as specified and as directed by Engineer-in-charge.
S&F 3 mm thick ordinary quality sheet glass in squares n exc 0.5 sqm in each pane glazing with oil putty, complete all as specified and as directed by Engineer-in-charge.
M&L for galvanised mild steel wire cloth of 0.56mm dia and average aparure of 1.4mm and fixed in position, complete all as specified and as directed by Engineer-in-charge.
M&L for RCC, nominal mix, type B1, 1:2:4 using 20mm gradded stone aggregate as in lintels, etc., complete all as specified and as directed by Engineer-in-charge.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.
M&L for mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge.
S&F solid PVC door frame of size 50x95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube, supplying & fixing in opening, complete all as per specified and as directed by Engineer-in-charge.
S&F Factory made solid wire gauzed pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails M.S.frame shall be covered with heat moulded prelam PVC "C" channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panells will be wire gaused in lieu of single side prelam PVC sheet panel. The wire gause shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes, the wire gause shall be stretched to tighten firmly, and jointed to gether with solvent cement, suppling & fixing in the frame at site, complete all as per specified and as directed by Engineer-in-charge.
S&F 250 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
M&L for extruded aluminium alloy handle fabricated type of 150 mm long, complete all as per specified and as directed by Engineer-in-charge.
S&F exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 1mm dia GI suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick pre painted E- board in false ceiling including fixing arrangement from roof, complete all as per specified and as directed by Engineer-in-charge.
S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600 mm x 600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding Layer of 15mm thick in Cement Mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
All as per serial item no. 81 above, but on vertical surfaces over and including backing layer of 10 mm thick in CM (1:4), complete all as per specified and as directed by Engineer-in-charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as per specified and as directed by Engineer-in-charge.
S&F for mild steel framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders, framed balusters, walk ways railings, framework of water tanks and similar work confirming to Fe 410 -0 or Fe 310-0, complete all as per specified and as directed by Engineer-in-charge.
M&L for preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc. 10 cm width or grith, complete all as per specified and as directed by Engineer-in-charge.
Dismantling of wall & ceiling boards (fibre,pulp,insulation etc.) or insulation board/slabs/ blankets of any thickness, including cover fillets, complete all as per specified and as directed by Engineer-in-charge.
S&F powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 nun thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and ·including ceiling section(not exc 1.2 m length) of 0.55 mill thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately), complete all as per specified and as directed by Engineer-in-charge.
Surface dressing not exc. 15 cm deep and getting out soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge.
Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge.
M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as per specified and as directed by Engineer-in-charge.
M&L 15 mm thick rendering in CM 1:4 even and smooth without using extra cement on fair faces of brick work or concrete surface on external surfaces mixed with WPC @ 2% by the wt of cement, complete all as per specified and as directed by Engineer-in-charge.
Supply only integral water proofing compound confirming to IS, complete all as per specified and as directed by Engineer-in-charge.
M&L for RCC 1:2:4 Type B-1 (20 mm graded agg) nominal mix as in roof slabs, beams, cantilevers, bressummers, lintels over 1.5m span etc, complete all as per specified and as directed by Engineer-in-charge.
M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation, complete all as per specified and as directed by Engineer-in-charge.
M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge.
M&L for 75mm thick cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in sub base, complete all as per specified and as directed by Engineer-in-charge.
M&L PCC 1:3:6 type, C-2, 75mm thick as in plinth protection /path and pavement finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 including welding /fabrication and errection, complete all as per specified and as directed by Engineer-in-charge.
S&F steel ventilator with top hung shutters including hinges with steel handle and steel peg stay with glazeing bars, complete all as per specified and as directed by Engineer-in-charge.
S&F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty, complete all as per specified and as directed by Engineer-in-charge.
S&F extruded aluminium alloy with galvanised C-21 butt hinges 100 mm long, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium anodised, barrel tower bolt of extruded section 150mm long, complete all as per specified and as directed by Engineer-in-charge.
S&F of viterious china wash down water couple closet size 760x360x635 mm tap distance S-220 mm including making good to floor incl seat cover, complete all as per specified and as directed by Engineer-in-charge.
S&F 15mm bore basin mixer fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc, complete all as per specified and as directed by Engineer-in-charge.
S&F 15 mm bore brass CP wall mixer for mixing hot & cold water (Exposed Straight legs) with telephonic shower arrangement & Crutch (without hand shower and hoses) arrangement screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F chromimum plated hand shower with CP flexible pipe up 15 mm bore (ABS Body) with 1 mtr long Easy Flex tube in chrome finish, complete all as per specified and as directed by Engineer-in-charge.
S&F connection 15 mm size with PTMT nuts of length 450 mm, complete all as per specified and as directed by Engineer-in-charge.
S&F 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes, complete all as per specified and as directed by Engineer-in-charge.
S&F 15mm bore fancy type chromium plated two way bib taps with crutch or butterfly handle screwed down for iron pipes, complete all as per specified and as directed by Engineer-in-charge.
S&F vitreous china wall hung wash basin white of size 200 x 550 x 400 mm excluding taps, waste, but including barkets with pedestal, complete all as per specified and as directed by Engineer-in-charge.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as per specified and as directed by Engineer-in-charge.
S&F corner glass shelves with border to hold the bathing kit minimum width 150 mm and fixed in position, complete all as per specified and as directed by Engineer-in-charge.
S&F fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc, complete all as per specified and as directed by Engineer-in-charge.
S&F health faucet with 1.00 mtr tube and hook, complete all as per specified and as directed by Engineer-in-charge.
S&F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as per specified and as directed by Engineer-in-charge.
S&F Angle stop valve 15mm dia of PTMT any colour pressure screwed for iron pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F double layered 1000 Ltrs capacity rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed by Engineer-in-charge.
S&F PVC (SWR) floor trap plain 75 mm size with grating including jointing with solvent cement, complete all as specified and as directed by Engineer-in-charge.
S&F brass CP shower rose of size 125 mm swivel type fix to iron pipe, complete all as specified and as directed by Engineer-in-charge.
M&L for construction of septic tanks, exc, in ordinary soil, foundation in PCC (1:2:4), brick work in CM (1:4), RCC (1:1.5:3) Slab covers including RCC(1:1.5:3) precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 25 users.as per drg. No. CESZ/2019/TD-115, complete all as specified and directed.
M&L for construction of soakage wells excavation of 1.2 M dia X 3 M effective depth, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25 cover, interconnecting pipes of RCC/DWC complete filled with brick bats, complete all as specified and as directed by Engineer-in-charge.
S&F DWC (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional at depth 0.70m – 1.65 m, complete all as specified and as directed by Engineer-in-charge.
Excavation in post holes (or similar holes) each n.exc 0.5cum in soft/loose soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing of surplus soil to a distance n.exc 50 meters and making good surface, complete all as per specified and as directed by Engineer-in-charge.
S&F Mild Steel Plates for steel gates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe -290 (Gde E-165) complete all as specified and as directed by Engineer-in-charge.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge.
M&L for 100 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in flooring finishing the surface even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge.
M&L of Reinforced concrete pipes of size 300mm, class NP2, laid and jointed with collars, complete all as per specified and as directed by Engineer-in-charge.
M&L for plastic dividing strip, 38 x 1.5 mm thick and inserted in position to confirm to design, complete all as per specified and as directed by Engineer-in-charge.
S&F Mild Steel framed work as in doors or gates (Ornamental/ Design type ) of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per specified and as directed by Engineer-in-charge.
S&F screw bolts (machine made) (diameter = 11 to 15 mm) with hexagonal or square head at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or square nut exc. 10cm but n.exc. 15cm long MS Work as in bands , straps, supports or stays incl bolts, if reqd. , hold fasts, wall ties and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as directed by Engineer-in-Charge.
S&F for ACP (Aluminium composite panel material) Sheet with central core of thermoplastic material with an outer skin of aluminium sheet of specified colour of 3 mm thick with weight 3.8Kg per Sqm and impact strength not less than 50 Kg/Sqcm including all connected items and fixing, complete all as per specified and as directed by Engineer-in-charge.
S&F powder coated anodised aluminium door using 96.6mm X 44.8 mm X 1.5 mm aluminium chowkhats, 84.0 x44.7mmX1.5mm section vertical styles and 101. 60X44.88X1.5mm rails mounted 04 Nos SS butt hinges 100 mm for each shutter with hydraulic door closer, mortice lock six lever vertical type mild steel 100 mm size 02 Nos tower bolt 150 mm , sliding bolt 300 mm long 01 No, 200 mm 2 Nos door handles and bottom panel and top panel fixed with snap beading rubber of suitable size, complete all as per specified and as directed by Engineer-in-charge.
S&F 4.0 mm thick Sheet glass, ordinary quality sheet glass is ground or obscured or frosted, on one side, in squares exceeding 0.5 Sqm in each pane fixed with cut & mitred beads, complete all as per specified and as directed by Engineer-in-charge. Note - Beads will be measured under serial item No 141.
Taking down carefully aluminum/copper point wiring (light fan, socket or power) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade conical, regulators etc and separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as specified and directed complete all as per specified and as directed by Engineer-in-charge.
Taking down carefully unserviceable main switches and DB’s including wooden boards and removing from site including making good disturbed surfaces of walls complete all as per specified and as directed by Engineer-in-charge.
Taking down old ceiling fan/exhaust fan and to be kept safely in store and refixing the same fans after proper cleaning and testing to its original position, complete all as specified and as directed by Engineer-in-charge.
M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and incl PVC casing capping sleeves and caps of adequate width and length with all accessories and fittings like bends . elbow crosses etc with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings etc like switches sockets and fan regulator incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly complete all as specified and as directed for one light point controlled by one switch, complete all as per specified and as directed by Engineer-in-Charge.
All as per Serial item No. 145 above but for one fan point controlled by one way switch.
All as per Serial item No. 145 above but for one 3 pin socket outlet 5 AMPs on same board.
All as per Serial item No. 145 above but for one 3 pin socket outlet 5 AMPs on independent board.
All as per Serial item No. 145 above but for one bell push point controlled by one 5 amps bell push.
All as per serial item no. 145 above but with 4 sqmm (nominal area) cable with 4.00 sq mm size copper earth continuity conductor of green colour for 15 A socket on independent boards.
Supply and fix switch socket combination 05/16 Amp 6 pin flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch piano flush type, 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.
Supply and fix socket outlet, 3 pin 5/6 Amps, flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix switch socket combination 05/06 Amp 3 pin flush type, complete all as specified and as directed by Engineer-in-charge.
Supply and fix ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge.
Supply and fix bell push 5 Amp flush type single pole 230 volts one way complete all as specified and as directed by Engineer-in-charge.
Supply and fix Call bell ding dong type, AC, 230 Volts, Single pole, complete all as specified and as directed by Engineer-in-charge.
Supply and fix fan regulator electronic type, flush type 240 Volt, complete all as specified and as directed by Engineer-in-charge.
Supply and fix LED tube light fittings1 x 20 Watt, 220 V, AC decorative box type with driver holder including LED tube rodconnecting up with three core flexible copper conductor cable from ceiling rose to tube light fitting complete all as specified and as directed by Engineer-in-charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm, complete all as specified and as directed by Engineer-in-charge.
S&F PVC rectangular block for mounting, DBs, etc. with 3mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 8 way double door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 240 Volts, 40 Amps, C-curve, breaking capacity 10 KA rating including, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed by Engineer-in-charge.
Supply and fix in repair 16 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed by Engineer-in-charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps for AC point, complete all as specified and as directed by Engineer-in-charge.
S&F LED light fitting 1x9W /1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE:- (i) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply and fix sheet metal enclosure powder painted for MCB SPN 02 way single door DB with din rail and suitable bus bar complete all as specified and as directed by Engineer-in-charge.
Supply and fix MCB SPN 240 Volts 6-32 Amp, C-curve, breaking capacity 10 KA rating, complete all as specified and as directed by Engineer-in-charge.
Supply and fix 10 Sqmm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .