REPAIR AND MAINTENANCE OF PIPE LINE AND EXTERNAL WATER SUPPLY AND ALLIED WORK AT DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and as directed.

Removing excavated material n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Taking out old existing GI water tubing lines and connected unserviceable pipe and fitting includidng segregation of serviceable pipe and fittings and keep in safe custody and reuse serviceable pipe line and fitting from trench/ in ground/under road /under PCC path etc the site of work complete all as specified and as directed of the following bore size :- Note : Earth work will be measured and paid for separately

(a) 50mm bore pipe

(b) 40mm bore pipe

(c) 25mm bore pipe

(d) 20mm bore pipe

(e) 15mm bore pipe

Relaying/ refixing of old serviceable GI pipe and connection as obtained from item No 4 here-in-before with running GI fittings cleaning of pipe internally and externally complete all as specified and directed of the following bore sizes :- Note : New fitting (Medium grade) shall be provided

(a) 50mm bore pipe

(b) 40mm bore pipe

(c) 25mm bore pipe

(d) 20mm bore pipe

(e) 15mm bore pipe

M&L for GI water tubing medium grade and laid in trenches/floors with running fittings complete all as specified and directed of following bore sizes :-Make of GI Water Tubing medium grade - TATA/JINDAL/SURYA PRAKASH., Make of GI FITTINGS- Only ISI marked Fittings.

(a) 50mm bore pipe

(b) 40mm bore pipe

(c) 25mm bore pipe

(d) 20mm bore pipe

(e) 15mm bore pipe

M&L for GI water tubing medium grade fixed on walls or laid in floor of following bore sizes and making good the disturbed surfaces all as specified and directed :- Make of GI Steel Water Tubing- TATA/JINDAL/SURYA PRAKASH., Make of GI FITTINGS- Only ISI marked Fittings.

(a) 50 mm bore pipe

(a) 40mm bore pipe

(b) 25mm bore pipe

(c) 20mm bore pipe

(d) 15mm bore pipe

S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed of following bore of size including dismantling of old GM gate valve (Make : Kirlsokar/BIR/Zoloto)

(a) 50mm bore pipe

(b) 40mm bore pipe

(c) 25mm bore pipe

(d) 20mm bore pipe

(e) 15mm bore pipe

Re-fixing old serviceable gate valve in any location of any make including dismantling of existing ones all as directed by Engineer-in-charge of following bore sizes :-

(a) 50mm bore pipe

(b) 40mm bore pipe

(c) 25mm bore pipe

(d) 20mm bore pipe

(e) 15mm bore pipe

M&L construction of brick masonary valve pits of size 600x600x600 mm internal dimension with brick work in cement mortar (1:4) including excavation and earth work in soft/loose soil, concrete work, 3mm thick MS sheet cover with locking arrangement, hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete all as directed including demolition of existing damaged valve pit and removing unsv material all as specified and directed.

M&L construction of brick masonary valve pits of size1200x1200x1200mm internal dimension with brick work in cement mortar (1:4) including excavation and earth work in soft/loose soil, concrete work, 3mm thick MS sheet cover with locking arrangement hinges and handle rendering work, painting to all steel surfaces with two coats red oxide primer complete all as directed including demolition of existing damaged valve pit and removing unsv material all as specified and directed.

Taking up cast iron/ductile iron/MS water mains of following sizes of bore (including all fittings) with spigot and socket ends and lead joints, including burning out joints and recovering lead complete all as specified and as directed. Note :- Earth work will be measured and paid separately

(a) 300 mm bore

(b) 200 mm bore

(c ) 150 mm bore

(d) 100 mm bore

(e) 80 mm bore

M&L for MS black pipe 300 mm nominal bore , 5.00 mm thick for water alongwith joints of ends by welding /flanged etc or other jointing materials and confirming to IS 3589 Gr 330 in any length for classification complete all as specified and as directed . Make -Tata/Bhusan/JindalAsian

All as per Item No 13.00 above but 200 mm bore pipe

M&L for MS black pipe 150 mm nominal bore , medium grade 'B' class for water alongwith joints of ends by welding /flanged etc or other jointing materials and confirming to IS 1239 Part I in any length for classification complete all as specified and as directed . Make -Tata/Bhusan/JindalAsian etc

All as per Item No.15.00 above but 100 mm bore

All as per Item No.15.00 above but 80 mm bore

Taking out and Relaying after rectifying in the defects old CI/DI/MS pipe line of 300mm to 80 mm size in new or old position including cleaning , cutting to required length etc. as per site requirement Note :- Excavation earth work, jointing materials, fittings will be measured and paid for separately

M&L for CI iron special fittings such as bends (any type, radius and angle) tapers any type, (straight bend, increasing, decreasing or double socket etc) Tee pieces single branch. Y junction double branch cross (all flanged and socket type joints) collers, caps and plugs for upto 150 mm bore in mm all as specified and directed

All as per Item No 19.00 above but for 200 to 300 mm bore

Supply and fixing Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth upto 150 mm bore

Supply and fixing Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth from 200 mm to 300 mm bore

S&F in replacement of double flanged sluice valve of size 200 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 150 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete

S&F in replacement of double flanged sluice valve of size 100 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete

taking down and refixing after Repair of double flanged sluice valve of size 200 mm to 400 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete

taking down and refixing after Repair of double flanged sluice valve of size 150 mm to 80 mm bore class PN 1.6 confirming to IS 14846/2000 with stainless steel spindle including replacement of worn out rubber sheet nut, bolts and washers complete

M&L for rubber gasket push on joint suitable for following dia spigot & socket ductile iron pipe & fitting complete all as specified and as directed

(a) 100 mm dia

(b) 150 mm dia

(c ) 200 mm dia

(d) 300 mm dia

M&L for lead wool joint suitable for following dia CI/DI iron pipe & fitting complete all as specified and as directed

(a) 80 mm dia

(b) 100 mm dia

(c ) 150 mm dia

(d ) 200 mm dia

(e) 300 mm dia

M&L in replacement of worn out /unserviceable SS spindle along with gutaka of 150 mm dia sluice valve complete with gland and gasket all as specified.

M&L in replacement of worn out /unserviceable SS spindle along with gutaka of 200 mm dia sluice valve complete with gland and gasket all as specified.

M&L in replacement of worn out /unserviceable SS spindle along with gutaka of 400 mm dia sluice valve complete with gland and gasket all as specified.

M&L in replacement of worn out /unserviceable SS spindle along with gutaka of 300 mm dia sluice valve complete with gland and gasket all as specified.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 30 cm in depth for passing of pipe line and making good of disturbed surface to match with the existing surfaces by using new material i.e bitumen, aggregate complete incl compaction of cutting portion and making good all as specified and directed

M&L GI flange joint 150 mm bore 6/8 holes with rubber packing ring using suitable size nuts, bolts and washers, welding work complete to join two pipe all as specified and as directed .

All as per item No 35 but 100 mm dia

All as per item No 35 but 80 mm dia

S&F in replacement of double flanged Non return valve of size 200 mm bore including replacement of unserviceable NRV complete. Make- kirloskar/ upadhayay/ GDPA

S&F in replacement of double flanged Non return valve of size 150 mm bore including replacement of unserviceable NRV complete. Make- kirloskar/ upadhayay/ GDPA

S&F in replacement of double flanged Non return valve of size 100 mm bore including replacement of unserviceable NRV complete. Make- kirloskar/ upadhayay/ GDPA

K S BUILDERS

M/S Builders Indias

GURU KRIPA ENTERPRISES