Construction of Pandeypur Ekauna Road (ODR) Km.-9 me isthit Damage Puliya ke asthan per 2x3.00x3.00 mtr. Span RCC Box Culvert Year 2025-26 in District-Shrawasti. (05 Years Maintenance)

Excavation in Soil with By Hydrolic ExcavatorEarth work in Excavation of foundation of structures as per drawing and technical spesification of MORTH Item no 304 B 15.01

Sand Filling in FDN complete as per Drawing and Technical Specifications. MORTH 304 SR No. 12.03

PCC Grade M10 using batching plant & manual placingPCC nominal mix in Foundation with crusd stone Aggrigate 40 mm Nominal size Mechenicaly mix ,Placed in foundation and Compactiing by Vibration including Curing for 14 days. MORTH 2100 Sr No. 12.04

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical SpecificationsRCC Grade M30 using batching plant & manual placing( MORTH 1500,1700 &2200 Sr No. 13.05 G)

PCC Grade M20 Using Batching Plant ,Transit Mixher and Manual PlacingPCC Grade M20 using batching plant & manual placing (MORTH 1500,1700 & 2100 Sr No. 15.11 B case II)

Providing and laying Cement concrete wearing coat M-35 grade including reinforcement complete as per drawing and Technical Specifications MORTH 2702 Sr No. 15.18

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORTH 1600 &2200 Sr No. 13.06

Providing Weephole in rainforcement concreet slab ,abutment,wing wall with 100 mm dia ac pipe extending through the full width of the structure with slop of 1V:20H towards drawing face ,complete as per drawing and specifacation as MORTH Spec 2706 and 2200

Dewatering of ground water below spring level for excavation & foundation concreting and brick work including boring of pipe operational and running charge of Diesel pumps complete.

Drainage Spouts complete as per drawing and Technical specification MORTH 2705 Sr No. 15.17

Back Filling Bihind Abutment , Wing Wall and Return Wall complete as per drawing and Specification MORTH 710.1.4.of IRC 78&2200 Sr No. 15.23

Providing and laying Flooring complete as per drawing and Technical specifications laid over cement concert bedding. Rubble stone laid in cement mortar 1:3

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications MORTH 2503 Sr No. 16.01

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. MORTH 800 Sr no. 14.16

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. MORTH 305 sr No. 3.16

Construction of granular sub-base by providing dismantaled material from existing road, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place mathod with front end loader at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the material with water at OMC in mechanical mix (Plant), carriage of mixed material by tipper to site laying in uniform layers With paver in sub-base/base course on well prepared surface and compacting with vibratory-roller to achieve the desired density. Laying using Paver

Providing and applying Primer Coat with SS1 Grade Bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer @ 0.70 kg/sqm using mechanical means.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen using bitumen pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisherwith sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507complete in all respects

Construction of Subgrade and earthen shoulder with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. MORTH 305 sr No. 3.18

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification MORTH 2504 Sr no. 16.05

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications MORTH 2503 Sr No. 16.01

The Above Rates Are Exclusive of GST

Please Enable Macros to View BoQ information