PROVISION OF GARDEN LIGHTS AND HIGH MAST LIGHTS AT APPROACH ROAD AND PERIPHERY LIGHT AT ALG AREA, REPALCEMENT OF EXISTING FLUORESCENT TUBELIGHTS/CFLS, BUILDING SECURITY AND STREET LIGHT TO LED BASED LIGHTING AT 8.0 HECT CG LAND OF ICGS DAHANU

Amount

Supply & installation of 12.5M high mast shaft in two section suitable for 180 Kmph wind speed along with head frame , luminiaries carriage suitable for 06 luminiaries in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch , 5mm diameter SS wire rope , trailing cable , connector , integral power tool motor, manual handle , junction box, lightining final, ( wiring material from JB to individual luminiarie & MCB in base compartment are not included and are a part of installation) , with supply of foundation bolts manufactured from special steel along with nuts , washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminairies, power tool control with 2 No 9A contactors and raise lower push button, Incoming 35 sqmm and outgoing 16 & 2.5 sqmm terminals. Make : Bajaj,Crompton, Philips, Havells.

HIGH MAST SYSTEM Height of mast : 12.5 meter No. of section : Two Material Construction : S355 Grade as per BS-EN10 025 Base dia and top diameter ( A/F) : Top : 150mm , Botton : 360 mm Cross Section of Mast : 20 side polygon Standard for Galvanisation : As per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 670 mm Thickness of base plate : 25mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 180 Kmph Number of foundation Bolts : 12 Nos PCD of foundation bolts : 590 mm Type/ diameter/ length of foundation bolts : TS 600/30 mm dia / 850mm long

FOUNDATION DETAILS 1. Excavation dimensions 2800 x 2800 x 1500 mm size 2. Lean concrete 100mm thick ( 1:4:8 ) D2 ( using 40mm graded aggregate) 3. Matt bars 12mm dia TMT Bars @ 200 C/C both ways in double lyers 4. RCC ( 1:1.5:3 ) 2600X2600X300 MM as in footing 5. RCC ( 1:1.5:3 ) 1000X1000X1400 MM ( 1100MM below GL and 300 mm above GL) 6. 8 Nos 16mm dia TMT Bars 4 at corners 4 at centers of pedastal col as main bar with 600 mm long craking at bottom over matt bars . 7. 16 Nos 12 mm dia TMT main bars ( 4 Nos each at 4 side with 600 mm long cranking at bottom over matt bars ) 8. 10 mm dia TMT bars @ 150mm C/C as stirrups 9. 300 mm dia 850 mm long foundation bolts 08 Nos inserted in to 16 mm thick anchoring plate 590 mm dia at bottom with pointed galvanised nut one each at bottom and top of plate . 10. Foundation bolt min clerance 150 mm above pedestal col to rest high mast base plate 25 mm thick over th bolts . Galvanished nuts 01 number at bottom of base plate 2 Nos at top of base plate . Note : The unit rate is inclusive of necessary formwork , RFR removal of surplus earth , external finishes and other unforeseen items all as directed by Engr-in-charge.

LUMINAIRES CARRIAGE Material Construction : 50 NB ERW Class B-M-S pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 06 Arm, Welded, 2 Sections Load carrying capacity : 06 luminaire

TRAILING CABLE Conductor : Copper , 5 core , 2.5 sqmm Insulation : EPR insulated PCP scheathed No. of circuits per mast : One

WINCH / POWER TOOL Type / SWL of winch : Double drum , SWL 750 Kg - SGDD Methode of Operation ; Integral Motor Motor capacity : 1.0 HP ( including suitable starter ) No of speeds : 6 Pole, Single speed Torque Limitor : With Mechanical Tripping Facility

STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter ( mm ) : 6 mm Breaking load capacity : 2350 kg x 2

Supply,lay and testing LT cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with multistranded aluminium conductor of cross-sectional area 35 sqmm; 3.5 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed. Make :- Polycab/ Finolex/ Plaza/ KEI

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm, 2 core laid in trenches/pipe/ducts/walls and making cable connections by providing cable lugs and glands complete all as specified and directed. Make :- Polycab/ Finolex/ Plaza/ KEI

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1, flt, size 250mmx150mmx40mm complete all as specified and directed

Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches upto 23 cm and punning to 18 cm to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth; for laying of cables ,protection pipes and foundations etc. and getting out in any soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for GI pip 80 mm dia "light grade "complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection complete all as specified and directed . Make :- Jindal/Tata/BST

Cutting of existing road, concrete/bituminous surface by using of mechanical method of any type complete all as specified and directed (Note:-PCC for making good road surfaces shall be measured and paid separately)

Material and labour for PCC 1:3:6 type C1 using 20mm graded aggregate for coping on brick walls including form work for ducts all as specified and directed.

Supply and fix LED flood light luminaire 150 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable items complete all as specified and as directed by Engineer-in-Charge. Make :Crompton/ Bajaj/ Phillips/ Syska

Supply and fix LED street light fitting 36 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LSTS-36-CDL-M /Havells/ BAJAJ/Phillips

Supply and fix FRP looping box of size 250x200x105mm with connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc and including removing old unserviceable item complete all as specified and directed. Make:- FRP Box - National/Sintex, MCB- Havells, ABB, Schenider,L&T

Supply and fix in repair LED bollard light fitting 10 watts cylindrcal shaped integral decorative with polycarbonate diffuser with IP65 protection complete with all accessories and internally prewired and necessary fixing arrangement including PCC platform by providing GI bolts complete all as specified and directed Make:- Crompton/ Phillips/ Bajaj /Syska

M&L for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6.0 mm thick buried directely in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the earth plate not less than 1.5 metres below ground level connected to and including galvanised steel wire of size 4 mm dia protected by GI pipe 15 mm dia light grade upto 7.5 metres or equipment which ever is less by means of GI bolts, nuts, check nuts and washers etc and providing GI watering pipe 20 mm dia medium grade, GI funnel with wire mesh including charcoal, salt packed all around the earth plate in layers and PCC earth pit chamber 1:3:6 type C1, RCC cover 1:2:4 type B1 of 50mm thick all as per electrical plate No.3 of SSR pt-I including necessary excavation/earth work in any strata, returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

Material and labour for rigid non metallic PVC conduit of size 25mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locks nuts, saddles, pipe hooks etc all as specified and directed.

Taking down existing unserviceable Flourocent tube light fitting 1X40watt, 1x 10 watt, 1x 20 watts CFL/Tube Light fitttings including ceiling rose, connecting cable of any type/make complete all as specified and directed .

Taking down carefully existing unserviceable Street light fittings 2 x36 watt CFL, GI bracket, old unsv cables with PVC conduit from existing location complete all as specified and directed.

Supply & fix in repair LED tube light fitting 1X 20 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-20-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply & fix in repair LED tube light fitting 1X 10 Watt white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. Make:- Crompton Cat No- LDL-10-CDL or equivalent in Bajaj/Halonix/ Phillips

Supply and fix LED street light fitting 45 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed. Make:-Crompton cat no- LSTS-45-CDL-M /Havells /BAJAJ/ Phillips

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;0.75 sqmm and including electric connection from ceiling rose to light fittings and testing complete all as specified and directed. Make :- Polycab/ KEI/ Finolex

Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body complete all as specified and directed. Make :- Anchor/Leader/Havells

Radha Engineering Services

Saviour Security Systems