Renovation of Amma unavagam in Paruvatha Singha Raja Street in Ward no 25

Dismantling of tiles clearing away and carefully stacking materials useful for re-use for any thickness of walls

Clean removal of cement plastering from walls

3-phase pannel board including labour charges

Paving the floor with vitrified tiles of 20mm thick in cm 1:3 and pointed with same colour cement including all cost of materials and labour charges etc., complete as per standard specifications.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing of 1200 mm (48") sweep AC Ceiling fan complete with stepped elctronic 300 W regulator with 1m down rod with fan clamp with side plates and cross cum size 450 mm (18") etc., complete.

Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton/K-Lite) suitable for 11W CFL lamp with CFL (SD 83)

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall andcovered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for light point / fan point (for electronic regulator)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Manufacturing, Supplying and Fixing of SS Hand Rails for staircase using 50mm dia 304L grade SS pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia SS pipe post of 1.00mm thick as vertical at 900mm centre with 2 No's of 25mm dia intermediate horizontal SS pipe of 1.60mm thick in between the vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete the rate is inclusive the charges of all labour charges etc., complete asper std specifications