REPAIR / MAINT OF SOLAR LIGHT FITTINGS INCLUDING BATTERY AND CONNECTED WORKS AT AWC UNDER GE (AWC) MHOW.

Amount

Supply and fixing in replacement of solar light fitting type BRP402 1x16 LER - HP/CW 28 w DIM 12 Vv3 system flux 2300K lumen 12v DC supply CCT 5700K complete all all as specified and directed.

Supply and fixing in replacement of Solar ALL-in-ONE street light fitting , smart integrated solar street light with built in mono crystalline panel ,lithium ferro phospate (LiFe P0 battery, MPPT Charge controller and PIR sensor with colour temperature 6000-6500K 20 watt all-in -one standard complete alll as specified and directed.

Supply and fixing in replacement of Battery 12V 180AH tubuler type for suitable solar light fitting type BRP402 1x16 LER - HP/CW 28 w DIM 12 Vv3 system flux 2300K lumen 12v DC supply CCT 5700K, complete alll as specified and directed.

M&L for pole painting approx 1 Mtr height up to battery stand Steel Tublar solar Poles including clamp, bracket and Battery box with two coats of aluminium paint after preparation of old painted surface and providing 03 No alternate strip of 30 cm wide with black and white super quality enamel paint above embeded level and writing pole No with 2 inch wide letter complete all as specified and directed by Engr-in-Charge

Trimming/ lopping branches of tree branches touching to solar panel not exceeding 30 cm girth , shrub, vegetation, bushwwod and saplings at least upto 2 M from outer edge of solar panel including removing of braches of trees etc. to a distance exceeding 100 m and not exceeding 150 M complete all as specified and directed. Note :- (i) Linear length centre to centre of the poles shall only be measured ) (ii) Shutdown wherever required shall be taken in writtig from Engr-in-Charge.

S & F cross arms of mild steel channel or angle sections of required size and shape including clamps, D clamps, eye hooks, back plate with bolts, nuts and washers, welding, bending cold or hot drilling holes for bolts, insulator in any shape or size as indicated or directed and inclusive of one priming coat and two coats of aluminum paint including preparation of surfaces complete.

M & L for takeing down & cleaning of solar street light panel including cheacking of connnection and replaced losses wire and petroleum jelly on battery terminal including top distil water and Hydro sulfurice acid testing of gravity of battery by hydro meter and charging as requried level and fixing the same complete all as specified and directed.

Supply, fixing, testing and commissioning energy saving long life LED Street light fitting limanaries 45 watt LED pressure die cast exoxy power coated alluminium housing with effcient designed heat shrink with heat resistent toughned glass with frame fixed with SS Screws suitable for fixing the exiting steel tubler pole and including nut bolt as per site requirement complete with ingress protection IP- 66 class -1 color temperture 5700K power factor not less then 0.95 , total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge.

MODI CORPORATION

S.S. Engineers

AGARWAL BUILDERS