REPAIR / MAINTENANCE AND POLISHING TO WOODEN FURNITURE AT BRICHGUNJ MILITARY STATION UNDER GE BRICHGUNJ, PORT BLAIR

Amount

Table Dining 6 person (FD-273 , FD/MAP-II/03)

Taking out old unserviceable top and Supply and fixing new top of size 1500 mmx900mm X 760MM of 18/19mm thick pre-laminated MDF board both side teak colour ,exterior grade,duly covered with 6mm thick teak wood beading alround complete all as specified and as shown on drg .Make - Novapan/Century/Greenply/Action Tessa

Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg.

All as per item ser No. 1.02 above but long rail of table dining

All as per item ser No. 1.02 above but short rail of table dining

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the table fixed with screw to provide more strength.

Taking down old U/S hard pvc ring and S/F new hard pvc ring of each leg with fixied 2mm screw of table dining .

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing under item No 1.02 to 1.05 required gioss to match with the exisiting complete all as shown on drawing and as directed by the Engineer-in-charge.

TABLE CENTRE (FD-274 & 29M)

All as per item No. 1.01 above but top of table centre of size 900mmx450mm

All as per item No. 1.02 above but leg of table center

All as per item No. 1.02 above but long rail of table center

All as per item No. 1.02 above but short rail of table center

All as per item No. 1.02 above but stiffiner of table center

All as per item No. 1.05 above but konia (wooden bracket) of table center

All as per items ser No 1.06 above but hard pvc ring of table centre of each leg

All as per item No 1.07 above but under item No 2.02 to 2.06 of table centre.

TABLE PEG (FD-277 & 236)

All as per item No. 1.01 above but top of table peg of size 450x300mm

All as per item No. 1.02 above but leg of table peg

All as per item No. 1.02 above but long rail of table peg

All as per item No. 1.02 above but short rail of table peg

All as per item No. 1.02 above but side stiffiner of table peg

All as per item No. 1.05 above but konia (wooden bracket) of table peg

All as per item No 1.06 above but hard pvc ring of table peg

All as per item No 1.07 but under item No 3.02 to 3.06 of table peg

TABLE WRITING (FD-275 FD-33M)

All as per item No. 1.01 above but top of table writing of size 1145x600mm

All as per item No. 1.02 but leg of table writing

All as per item No. 1.02 but center stiffiner of table writing

All as per item No. 1.02 but side stiffiner of table writing

All as per item No. 1.02 but top rail long of table writing

All as per item No.1.01 but shutter of existing size as shown on drawing.

Taking down old U/S drawer of front and back side and S&F new drawer of front and back side of 18mm thick pre-laminated MDF board as per required size complete all as shown on drawing.

All as per item No.4.07 above but side drawer of 12mm thick existing size as shown on drawing.

All as per item No 4.06 but bottom of drawer 6mm thick commericial ply BWR grade

All as per item No 1.06 but under hard pvc ring of table writing

Taking down old unserviceable knob and supply and fixing new decorative knob 40mm dia shape and size complete all as specified and as shownon drg.

All as per item No 1.07 but under item No 4.02 to 4.08 of table writing

Table 900 x 900 x760mm (FD-291)

All as per item No. 1.01 above but top of table 900 x900 x760 mm

All as per item No. 1.02 above but leg of table 900 x900x760 mm

All as per item No. 1.02 but bottom rail of table 900 x 900x 760 mm

All as per item No. 1.05 but konia (wooden bracket) of table 900 x900 x760 mm

All as per item No 1.06 but under hard pvc ring of table 900 x900 x760 mm

All as per item No 1.07 above but under item No 5.02 to 5.04 of table 900x900x760mm

TABLE DRESSING LADIES WITH MIRROR ( FD-251, FD 378 & FD-32)

Taking out existing old unserviceable foggi fadded looking mirror size 1200x380mm x 5mm thick with frame and S&F new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror shall be completed and all as spceified and shown on drg.

Removal of brocken glass panel and new glass pane of size 5mm thick duly slotted glass for sliding purpose compelete all as specified and shown on drg.

Taking down old us legs and S&F new leg of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing ..

Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified and as shown on drg.

All as per item No 6.04 but bottom of drawer 6mm thick commericial ply BWR grade as per required size complete all as per speccified and as shown on drg.

All as per item No, 6.04 above but exiting table top of table dressing ladies.

All as per item No, 6.04 above but table dressing ladies bottom.

All as per item ser No, 6.04 above but sides of table dressing ladies.

Taking down of unsv bottom frame and S&F new frame with legs of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing and shown on drg.

All as per item ser No, 4.11 above but knob of table dressing ladies.

All as per item No 1.07 above but under item No 6.03 to 6.09 of table table dressing ladies

Table Dressing Gents (FD-230)

Replecement of existing unservicable drawer for table dressing gents and S/F new drawer made out of prelaminted MDF Board exterior grade 12mm thick both side teak colour and 4mmmm teak wood beading around all as shown on drg.

Supply and fix in repairs new mirror 5mm thick of size 380x76mm with full frame all as shown on drg.

Supply and fix repair new top of size 900x300mm made out of 18mm thick prelaminated MDF Board exterior grade of approved size and shape shown on drg.

All as per item No. 7.03 but bottom of table dressing Gents.

All as per item ser No, 4.11 above but knob of table dressing gents

Material and labour preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all s shown on drawing and directed.

Table Bed Side MAP [FD/E6/MAP/15]

All as per item No. 1.01 above but top of table bed side of size 450x450mm

All as per item ser No,1.01 above but sides of table bed side

All as per item ser No, 1.01 above but bottom of table bed side

Removing of existing unserviceable Back of Table Bed Side MAP and providing new Back of size 460mm x 440mm with 6mm plywood commercial fixed with headless nail, rest all as shown on drg and as directed by the Engr-in-Charge. Make - Century Ply/ Greenply/ Kitply

All as per item ser No 1.01 above but pull out try of Table bed side

All as per item No. 1.01 above but side drawer of table bed side

All as per item No. 1.01above but front drawer of table bed side

All as per item No. 1.01above but bottom drawer of table bed side

Taking down old unserviceable handle and supply and fixing new cp handle 75mm long shape and size complete all as specified and as shownon drg.

Table Dining 1200x900mm (FD/MAP-II/03)

All as per item No. 1.01 above but top of table size 1200x900mm

All as per item No. 1.02 above but leg of table 1200x900mm

All as per item No. 1.02 above but short rail of table 1200x900mm

All as per item No. 1.02 above but long rail of table 1200x900mm

All as per item No. 1.05 above but konia (wooden bracket) of table 1200x900mm

All as per items ser No 1.06 above but hard pvc ring of table dining 1200x900mm of each legs.

All as per item No 1.07 above but under item No 9.02 to 9.05 of table 1200x900mm

TABLE WITHOUT DRAWER 900x 600 x 760mm [FD-231,284]

All as per item No. 1.01 above but top of table size 600x900mm

All as per item No. 1.02 above but leg of table 600x900mm

All as per item No. 1.02 above but short rail of table 600x900mm

All as per item No. 1.02 above but long rail of table 600x900mm

All as per item No. 1.02 above but side stiffiner of table 600x900mm

All as per item No. 1.02 above but centre stiffiner of table 600x900mm

All as per item No. 1.05 above but konia (wooden bracket) of table 600x900mm

All as per items ser No 1.06 above but hard pvc ring of table without drawer 900x600x760mm of each leg

All as per item No 1.07 above but under item No 10.02 to 10.07 of table 900x900x760mm

TABLE WITH DRAWER 900x 600 x 760mm [FD-224,283]

All as per item No. 1.01 above but top of table with drawer of size 900x600mm

All as per item No. 1.02 above but leg of table 900x600mm

All as per item No. 1.02 above but short rail of table 900x600mm

All as per item No. 1.02 above but long rail of table 900x600mm

All as per item No. 1.02 above but side stiffiner of table 900x600mm

All as per item No. 1.02 above but centre stiffiner of table 900x600mm

Supply and fix in repairs to unserviceable damaged drawers of size 300mm x 30mm x 18mm for table with drawer made out of pre-laminated MDF Board both side teak colour with including providing 6mm thick commercial ply to bottom of drawer complete, rest all as shown on drg and as directed.

All as per items ser No 1.06 above but hard pvc ring of table with drawer 900x600x760mm of each leg

All as per item No 1.07 above but under item No 11.02 to 11.07 of table with drawer 900x600mm

TEA POY(FD-278)

All as per item ser No. 1.01 but top size 600mm x450mm of teapoy

All as per item ser No. 1.02 but leg of teapoy

All as per item NO. 1.02 above but long rail of teapoy

All as item NO. 1.02 above but short rail of teapoy .

All as per item NO. 1.05 above but Konia (wooden bracket) of teapoy

All as per items ser No 1.06 above but hard pvc ring of teapoy of each leg

All as per item No 1.07 but under item No 12.02 to 12.05 of teapoy

Side board (FD-241, FD-1112)

Taking down U/S legs and S&F new legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size duly French polished to match existing surface complete all as specified and as shown on drg.

All as item No 13.01 above but bottom frame of size 1060x 290x 25x 45mm.

Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified and as shown on drg.

All as per item No 13.03 but bottom of drawer 6mm thick commericial ply BWR grade

All as per item ser No. 13.03 but partition of side board

All as per item ser No. 13.03 but top or bottom

All as per item No.13 .03 but shelf of side board

All as per item ser No. 13.03 but front shutter of side board

Taking down old unserviceable back ply and supply and fixing new back ply 6mm thick commericial BWR grade, IS-303 grade complete all as specified and as shown on drg.

Taking down old unserviceable cp handle and supply and fixing new CP handle shape and size complete all as specified and as shownon drg.

Preparation of surface with sand paper after scrubbing and French polishing to side board, with and including to the parts repaired/ replaced under item No 13.01 to 13.09 required gloss, to match with the existing complete all as specified and as shown on drg.

STOOL DRESSING CB (FD-252,27, 282)

All as per item No. 1.02 but leg of stool dressing

Same as item No. 1.02 but long rail of stool dressing

Same as item No. 1.02 but short rail of stool dressing .

Same as item No. 1.02 but centre stiffner of stool dressing .

Same as item No. 1.02 but side stiffner of stool dressing

Taking out unserviceable canning and new recanning of stool dressing of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane all as per specified and as shown on drg.

All as per item No 1.07 but under item No 14.01 to 14.05

Bin linen Multi purpose (FD/E6/MAP/09)

Taking down of unsv bottom frame and S&F new bottom frame with of 1st class seasoned teak wood free from knots and cracks with permissible moisture contains as per shape and size compelete all as specified on drawing and shown on drg.

All as per item ser No. 13.03 but drawer of Bin linen multi purpose

All as per item No 13.03 but bottom of drawer 6mm thick commericial ply BWR grade

All as per item ser No. 13.03 but partition of Bin linen multi purpose

All as per item ser No. 13.03 but top or bottom of Bin linen multi purpose

All as per item No.13 .03 but shelf of Bin linen multi purpose

All as per item ser No. 13.03 but front shutter of Bin linen multi purpose

All as per item ser No. 13.09 but back ply of Bin linen multi purpose

All as per item ser No. 13.10 but CP handle of Bin linen multi purpose

All as per item No 13.11 but under item No 15.01 to 15.08

CHAIR DINING (MAP) JCO/ORS (FD/E6/MAP/04)

Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.

All as per item ser No 16.01 but rear legs

All as per item ser No 16.01 but stiffener

All asper item ser No 16.01 but side rail

Same as item No 16.01 but back support

Provn of stiffiner (teak wood ) of size 25mm x25mm and 35 mm long seasoned teak wood between side rail of the chair fixed with screw to provide more strenghth. of PVC seat .

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the chair fixed with screw to provide more strength.

Taking out unservicable PVC seat of chair dining and supply and fixing new PVC seat 5mm thick white/cream colour fix of chair bottom all as directed.

Preparation of surface with glinderand sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 16.01 to 16.07, to the required gloss to match with the existing complete all as specified and as shown on drg.

Chir Writing (FD-280)

All as per item ser No. 16.01 but front leg of chair writing

All as per item ser No 16.01 but rear legs of chair writing

All as per item ser No 16.01 but stiffener of chair writing

All asper item ser No 16.01 but side rail of chair writing

All as per item ser No 16.01 but back support of chair writing

All as per item ser No. 16.01 but handle of chair writing

All as per item ser No. 16.07 but konai of chair writing

Taking out unserviceable caning and S&F new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern boarder side 4mm wide cane all as per specified and as shown on drg.

All as per item No 16.09 but under item No 17.01 to 17.07 of chair writing

Chair easy (FD-229)

All as per item ser No. 16.01 but front leg of chair easy

All as per item ser No 16.01 but rear legs of chair easy

All as per item ser No 13.01 but stiffener of chair easy

All asper item ser No 16.01 but side rail of chair easy

Same as item No 16.01 but back support of chair easy

All as per item ser No. 16.01 but handle of chair easy

All as per item ser No. 16.07 but konai of chair easy

Taking out unserviceable caning and S&F new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane all as per specified and as shown on drg.

All as per item No 16.09 but under item No 18.01 to 18.07 of chair easy

Chair Dining (FD-279)

All as per item ser No. 16.01 but front leg of chair Dining

All as per item ser No 16.01 but rear legs of chair Dining

All as per item ser No 16.01 but stiffener of chair Dining

All as per item ser No 16.01 but side rail of chair Dining

Same as item No 16.01 but back support of chairDining

All as per item ser No. 16.07 but konai of chair Dining

Taking out unserviceable caning and S&F new recanning of chair writing of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane all as per specified and as shown on drg.

All as per item No 16.09 but under item No 19.01 to 19.07 of chairDining

Bed ply top (FD-246)

Taking out unservicable plytop and S&F new 12 mm thick BWR plywood grade A OF SIZE 900X1800MM ISI Marked as confirmed to IS 303 in single place as per drawing without any joint to the bed frame with suitable stainless steel screws with cup whsher including removal of damaged plywood all as shown on drg and directed by the Eng-in-charge. Make of ply - Greenply/Centuryply/Kitply

Taking out old undervicable long rail and S&F new long rail 1st class teak wood as per existing size 1800mm x 85mm x 25mm of bed ply top including removal of damaged long rail all as shown on drg.

All as per item No. 20.02 but short rail of bed ply top

All as per item No 20.02 but stiffiner of bed ply top

All as per item No 20.02 but leg of bed ply top

Supply and fix in repairs to 4mm tick OST ply wood commercial of size 780 x180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as shown on drawing and as directed.

Supply and fix in repairs to 4mm tick OST ply wood commercial of size 780 x340mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as shown on drawing and as directed.

Supply and fix in repairs to flat iron of mild steel of size 35mm x5mm ,150 long cleat bent to right angle on each coners of bed all as shown on drawing and as directed.

Material and labour preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all s shown on drawing and directed.

Hat Stand With Mirror (FD-233)

Taking out old mirror and S&F new mirror 5mm thick for hat stand with mirror of approved make with complete frame back all as shown on drg. Make of Mirror- Sanit gobin/ Modigrard/ Atul

Taking out old undervicable back ply and S&F new back ply 6mm commercial of size 710mm with mirror fixed with headless nail all as shown on drg.

Supply and fix in repairs brass pegs with brass screw in place of lost/damaged pegs in hat stand with mirror rest all as shown on drg.

Material and labour preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abrasive colth thoroughly for smooth and clean surace and applying two coats french polish over a coat of wax to the depressed surace for smooth finishing complete all s shown on drawing and directed.

Chair Dining Offers Map (FD/E6/MAP/10)

All as per item ser No. 16.01 but front leg of chair Dining

All as per item ser No 16.01 but rear legs

All as per item ser No 16.01 but stiffener

All asper item ser No 16.01 but side rail

Same as item No 16.01 but back support

All as per item ser No. 16.07 but konai of chair Dining

Replacement of existing U/S cushion of chair dining and new foam cushion of size 40 density 75mm thick duly covered with tapestrycloth/ raxine and bottom side 12mm thick plywood including with stitching, rest all as shown on drg and as directed by the Engr-in-Charge. Note :- (i) Each cushion for seat will be measured as single unit. (ii) The tapestry cloth raxine shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make

All as per item No 16.09 but under item No 22.01 to 22.07 of chair Dining

SOFA SET 4/5 PERSON WITH CUSHION [FD-281,373]

Replacement of existing U/S cushion of Sofa Set with new foam cushion of size 40 density 100mm thick duly covered with tapestry cloth including mulmul cloth and stitching, rest all as shown on drg and as directed by the Engr-in-Charge. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapestry cloth shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make

Removing the existing unserviceable front leg from Sofa and providing new first class teak wood leg of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and providing new first class teak wood leg of size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable Armrest from Sofa and providing new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and providing new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable bearers from Sofa and providing new first class teak wood bearers of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable battens from Sofa and providing new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and providing new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and providing new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by the Engr-in-Charge.

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge.

SOFA SET 4/5 PERSON WITH CUSHION [TP]

Replacement of exisiting U/s foam cushion of Sofa set with new foam cushion of size 40 density 100mm thick duly covered with tapestry/raxien with stitching, rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each foam cushion for seat or back will be measured as single unit.

Removing the existing unseviceable front leg from Sofa and providing replacement new leg as directed by the Engr-in-Charge

Removing the existing unservicable rear leg from Sofa and providing replacement rear leg as directed by the Engr-in-Chage

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge. for the following furniture articles:-

Bed Ply /Bed newar [FD-246/ 247]

Book Case [FD-237]

Peg Table [FD-236,FD-277]

Side Board [FD-241,FD-1112]

Stool Dressing [FD-282]

Table dressing Ladies with mirror [FD-251]

Table dressing Gents with mirror [FD-230]

Teapoy verandah (Top only) [FD-208, FD-255]

Table dining 6/8 persons [FD-273]

Teapoy [FD-278,382]

Table centre [FD-274 / 235]

Table writing [FD-33,275]

Form with back wooden [FD-77M

Chair Easy [FD-229

Chair Writing [FD-280

Chair Dining [FD-279]

Chair wooden bottom (FD-285)

Desk with Dias [FD-399]

Hat stand with mirror [FD-233

Rack side 3/4 spaces [FD-106]

Sofa set 5 seater [FD-281,373]

Sofa set 4 seater [FD-281,373]

Table 3'X2' without drawer [FD-231,284]

Table office clerk wooden [DB-4120]

Table Dining 1200x900mm

Table 3'X2' with drawer [FD-224,283]

Table 900mmX900mmX760mm [FD-88,291]

SUBASH FURNITURE SHOP