Providing illumination with LED light fitting on old 9 mtr. long octagonal pole and bollard light on the pariphery of park near Surya Enclave Under Municipal Corporation, Karnal limits

Amount

Supply & Erection of fabricated round bracket made of 40 mm dia G.I pipe duly fitted on octagonal pole including the cost of errection, etc.

NS"150 watt Flood light :- Supply LED based Street light IP66 and it must posses the minimum specification & condition :- 1.3 No's surge protector & 3 No's drivers are to supplied with supply of LED for the 5 years warranty period. After replacing these drivers/SPD with defected part, further defected drivers/SPD stock are to be replaced with new drivers & surge protector within 5 year warranty period. (Suitable for 150 W LED flood Lights).2.The 05 years warranty will be given by the Manufacturer/Brand area Manager in written. Only then, LED light will be acceptable.,3.LED lights fittings as per Category- A &B (Phillps, bajaj, GE, Havells) of list approved by PWD Department etc.",1.Input voltage:- 90-270 V, AC standred with cut off at 300v with automatic on provision. for protection from surge high voltage the provision of auto shut down should be provided.,2.Input Frequency:- Input Frequency =50 Hz + 3%,3.Power factor :- (>0.95),4.Working Humidity:-10% to 90% RH,5.Working temperature:- -10°C to (+) 50°C),6.Luminary efficiency:- ≥100 lumen/watt as per LM79 data from certified third party testing facility like NABL approved lab/UL Lab.,7.Optics-Lens Material/Make of lens:- High impact polycarbonate (PMMA)/Cathode, Ledlink, Ledil.,8.Luminary Housing:- power pressure die cast aluminium housing with ADC 12 Or LM6 alloy and toughened glass cover.,9.Screws, Fasteners & Clamping material:- Stainless steel Grade – 304.,10.Surge / Spike Protection:- 4 KV (internal) and 10 KV using external certified surge protector.,11.Make of LED:- Lumileds / Cree/ Osram /Nichea/ Samsung/Seoul or any other equivalent. ,12.Color Temperature:- 5500-6500K,13.Color rendering index:- ≥ 70,14.Life expectancy of the project (LEDs):- Minimum 50000 hrs. with minimum 70% lumen output L70 data to be produced for LEDs and LM79 for Luminaries.,15.LED Printed Circuit Board:- Metal Core Printed Circuit Board. Thermal Conductivity ≥ 2W/MK,16.Class of Power Supply:- Class II, LVLE input output isolations (Max 100 VA output),17.THD:- ≤ 10%,18.Uplight:- Zero Uplight as per LM79 report from NABL/Lighting Facts/accredited third party testing facility.,19.Photomtry :- LM79 Report from NABL/Lighting Facts accredited lab for all variants. ,20.Lumen depreciation (L-70) :- ≥ 50,000 hours (as per TM21 using L80 data & INSITU data by LED manufacture LM 80 report).,21.Ingress Protection:- IP66 as per IEC 60598/IEC 60529 from NABL accredited lab for all LED.,22.Conducted Emission and Radiation:- Emission test report from NABL accredited lab conforming limits complying with IEC 61000.,23.Driver Test:- As per BIS,24.Wattage Variation:- ±10%,25.Wattage of LED:- 1-3 watt ,26.Pole entry dia :- Should be suitable for mounting of 30 to 56mm outer diameter poles with locking bolts / should provide with complete bracket with locking bolt.,27.LED drive current:- <1000mA ,28.Beam angle:- 80° / 135° with lens ,29.Safety Test:- As per IEC 61347 – 2 - 13,30.LED lights fittings as per Category- A & B(Phillps, Bajaj, GE, Havells) of list approved by PWD Department etc.,31.LED light fitting will provide a on site Guarantee/Warranty certificate applicable for minimum five(5) years from the date of commissioning of LED lights fitting from company in written.

Supply and Erection of cosmic bollard modal as Lux Max TLS-B 172R (H-980 mm) are made of extruded aluminum profile with cast aluminum basis combination of PC rings and die cast aluminum lovers suitable for LED Strip light retrofit B-22d/E-27 of twinkle, bajaj or similar make with 1:2:4 C.Conc. Block of size 0.3x0.3x0.46 mtr below ground level and 0.23 mtr above ground level including the cost of PVC pipe and petty material required to complete the job complete in all respect including necessary connections up to the entire satisfaction of Engineer in-charge.

Supply and Erection of wire casing made of 1"x1"x1/8" A.l. frame and welded with 1.25" square M.S jali with 6" long legs fixed in ground with cement concrete mixture, duly painted with green or white paint as required with lock and roof of wire casing should be fully covered. The size of casing is 1'x1'x3'-6" to cover with CC base of size 2'-6" high(1'-6" above G.L. & 1' below GL) and 12" squire duly plastered with 12.5 mm thick cement and mortar fitted with 16 GMS junction box of size 10"x7"x4" up to the entire satisfaction of Engineeer-in-charge.

Construction of RCC foundation for bollard light of specification 1' x 1' x 3' (L x B x H) with 4 nos. x 12 mm dia verticle and 2 nos. x 8 mm dia reinforcement steel rod complete in all respect as per the appended design including the cost of digging sand filling Bar binding cement concret (M-20) shuttering, fixing of foundation bolts, refilling, carrying and erection of fibre pole on foundation including petty material to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (Foundation Bolt is to be arranged by the agency).

Supply, erection and commissioning of Digital time switch (Make as per Category- A & B of list approved by PWD Department).

Along with 3 pole power contactors type ML4, AC3 Rating (A) 32, aux. Contacts (2NO+2NC), (Make as per Category- A & B of list approved by PWD Department) in pedestal at along with wiring contacts and programming of time switch to control street light ON-OFF . Time to be set as directed by Engineer in-charge of the work.

Bidder Name

Amount

Choudhary Electricals