MISC REPAIR TO DRAINS, COMPOUND WALL, FENCING, HARD STANDING AND ROAD SIDE FURNITURE IN AGE B/R-I AREA UNDER GE SAUGOR

Amount

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar and removing rubbish from site complete all as specified and directed

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortor 1:6 complete all as specified and directed.

All as per Srl item No. 2 but except stone.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer including preparation of surfaces of walls complete all as specified and directed

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls etc complete all as specified and directed Make:- Asian Ace or equivalent make as specified in Appx 'C' of Particular Specifications

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.

M&L fpr cement plaster in two layers on stone masonry surfaces or surfaces other than fair face of brick work ,first layer 15 mm thick in cement mortar (1:6) and second layer cement plaster 10 mm thick in cement mortar (1:4) with WPC @ 3% by weight of ement, finished the surfaces fair and even complete all as specified & directed. (Note:-WPC shall be measured and paid seperately under respective item)

M&L for applying three coats of white wash on new plastered wall surface including preparation of surface complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed

Demolition of cement concrete unreinforced in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed

M&L for hardcore of gauge n.exc 63 mm, with broken stone or boulderes deposited, spread and levelled in layers n.exc. 15 Cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid on stone dust cushion of 40 mm thick complete all as specied and directed.

M&L for coloured designer tiles exterior grade ( Endura or equivalent ) 10 mm thicklaid over and including 15 mm thick CM(1:6) set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc including dismantling of existing floor tiling and removing rubbish from site complete all as specified and directed

M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in surface channes of drain complete all as specified & directed

M&L for PCC 1:2:4, type B 1 ( using 20 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating incl. necessary form work etc and making the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 18mm to 20mm thick pre-polished Granite slab, machine cut, for floors/ shelves,cooking platforms window cill, steps, jambs and pillor top laid over and including 15mm thck CM 1:4 cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Granite stone complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary, etc and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed

Excavating in post holes in any type of soil each n.exc 0.5 cum , getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors complete all as specified and directed

S&F mild steel Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 5 cm long dia of shank 12 mm complete all as specified and directed.

S&F chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Make:-Tata/SAIL/Jindal

M&L for painting on new steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat red oxide Zinc chromate primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer complete all as specified and directed

M&L for Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins, etc. including dismantling of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed. Make:-Tata/SAIL/Jindal

Surface exacavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing etc including nesessary formwork complete all as specified and directed.

Dismantling of old unserviceable road sign board of any shape and size complete all as directed.

S&F stainless steel of Grade 304 of circular/square section incl plate/sheets/decorative items like dooms, cover cups etc as in frame work for road sign board complete all as specified and directed .

M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in mass concrete, finshed fair and even without using extra cement complete all as specified and directed.

S&F recto reflective sign face (Square or rectengular ) consist of 4mm thick aluminium composite panel sheet sign substrate and over all lamination using high intensity grade recto reflective media 3M or Unicorp make conforming to ASTM 4956 type -IV or above with text cutting as per direction of Engr-in-Charge. Using computerised cutter plotter & pneumatic automated squeeze roll applictor ) on overlay film or similar sheetng for text /graphics & symbol etc as per approved design and aluminum rivets, break away type nut/bolts (Each sign face shall be acked by staineless steel frame and stainless steel itmes will be measured and paid separately) .

S&F in repairs recto reflective sign face (Square or rectengular ) consist of 4mm thick aluminium composite panel sheet sign substrate and over all lamination using high intensity grade recto reflective media 3M or Unicorp make conforming to ASTM 4956 type -IV or above with text cutting as per direction of Engr-in-Charge using computerised cutter plotter & pneumatic automated squeeze roll applictor ) on overlay film or similar sheetng for text /graphics & symbol etc as per approved design and aluminum rivets, break away type nut/bolts complete all as specified and directed

S&F in repairs of ABD/EPDM modular speed breaker size 400mmX50mmX250mm rectangular shape fixed on road with bitumen adhesive and dash fastener nails/bolts as per manufacturer instructions having abrasion resistance ceramic coating and reflective surface complete all as specified and directed.

S&F in repairs bi-directional reflective type road studs (Cat Eye) illumineted yellow both sides of rectengular/square shape makeup of thermo plastic body fixed with Epoxy adhesive and supported with 2 Nos 6mm MS Screw complete all as specified and directed by Engineer-in-charge. Make:- Birla 3M / Kataline or equivalent make as approved by GE.

S&F in repairs delenater DA-952 GP of size 700mmx100mmx50mm ABS round body fitted with 100 mm dia hightly reflective ,UV stabilized in yellow colour mounted on MS pipe 50 mm dia, provided with anti rust & anti theft. including PCC foundation of size 150mmx150mmx300mm with PCC 1:3:6 type C1 incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and as directed by Engr-in-Charge. Make: Dark Eye or equivalvent model in TATA BP/ Birla 3M

S&F in repairs superior quality solar delineators, which can be mounted on a pole, cone etc to warn motorists from a distance of an approaching crossovers, flyovers Cat Part No. SKU: DA-112-(SOLAR-DELINEATOR) etc.including PCC foundation of size 150mmx150mmx300 mm with PCC 1:3:6 type C1 incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and as directed by Engr-in-Charge. Make: Dark Eye SKU: DA-112-(SOLAR-DELINEATOR)

S&F in repairs of water proof, energy saving and environmetally friendly road stud with solid aluminium alloy shell power by solar cells and panels, ideal signal products for highways, parking lots, roads and similar isolated or stand alone traffic applications and fixed with epoxy hardner adhesive comprising the following complete all as specified and directed :- (i) Aluminium alloy shell (ii) Solar panel mono-crystalline solar 2.4 ZV /0.3 watt (iii) One Ni-Mh or Ni-cd rechargeable batt (1.2 V/1600mA) (iv) Six super bright LEDs (v) Colour - yellow, red, blue, green and white (vi) Working time 50 to 60 hours successively after battery is fully charged (vii) Solar energy -based power source (viii) Charging time : five to six hours / day (ix) Brightness sensitive auto switch automatically turns on at night & turn off at dawn (x) High visibility LEDs to help easy and safe night driving Make:- Birla 3M/ Dark Eye/ Kataline

pal enterprises

dipangashu barick and associates

maharaja construction and suppliers

siddhant construction

Pandey Construction and Engrs