14.Construcion of Anganwadi Building at Elaikadambur Village Mariyamman Kovil Near in Periyakuruchi Panchayat in Sendurai Block of Ariyalur District Under AGAMT 2025-26

Amount

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 22 X 11 X 7cm for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.

Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

RCC M20 - 1:1.5:3 mix using 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering shuttering and cost of reinfircement grills placed in position.

Supply of Steel door 0.90 x 2.10 m

Supply of Steel door 0.75 x 2.10 m

Supply of Steel window 1.20 x 1.30 m

Weathering course in Brick jelly lime using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges etc.,

Finishing the top of roof with one course of machine pressed tiles of size 20cm x20cm x 2cm of approved quality laid in CM 1:3, 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide etc., Complete comlying with standard specification

Plastering with CM 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with CM 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Paving the flooring with special type of flooring tiles (Cement based hydraulically pressed anti skid tiles 20mm thick) in CM 1:3, 20mm thick (Hall, Skerting alround)

Paving the flooring with special type of flooring tiles (Cement based hydraulically pressed anti skid tiles 20mm thick) in CM 1:3, 20mm thick (Toilet and Kitchen)

Plain Cement concrete 1:2:4 mix using 20mm ISS HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Dadoodling the walls with colored glazed tiles approved size, quality and color set in CM 1:2 - 10 mm thick. And pointed with suitable cement including finishing the joint and pointing flesh with walls and tile surface in all floors at the rate of 0.40 Kg /Sqm etc. complete. Basic cost-Rs.318/sq.m

Painting two coats with plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., including cost and conveyance to site and all labour charges etc., complete

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including all labour charges etc., complete

Supplying & Fixing in position Europeon Water Closet with all fittings and 10 lit capacity flusing tank including all labour charges etc., complete

Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm including all labour charges etc., complete

PVC Light / Fan point SD No.17

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL SD No 83

Supply and fixing of single box type 4'40 W fluorescent fitting complete with copper chock and condensor with conduit pipe suspension form the ceing with PVC unsheathed Copper leads from terminals to the fitting with tube SD No 89

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD No.110

Open PVC plug point SD No.36

TNEB meter board SD 125

Supply and run of 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe suitably bent at both ends with necessary angle iron upright and end supports for main (SD No.69)

Service connection SD No.64

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall openeing and making good of the wall main SD No.114

Provision for Bala Painting

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Kalamegam B (BID ID -1326829)