Stock Storage HP

Amount

Demolition of brick work above GL upto floor two level including stacking of serviceable materials and sisposal of un-serviceable materials with 20mtr. Lead in cement mortar.

Half Brick masonary using common burnt clay building bricks above plinth upto floor two level in cm 1:4(1cement:4sand)conventiohal brick first class

Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-

foundation footing and bases of columns & like mass concrete.

Column.pillar & post upto floor two level

landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level

Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-

Foundation footing bases of columns & mass concrete.

Column.pillar & post upto floor two level square, rectangular& polygonal in plan.

Beams, cantilever Girders& lintals sides&soffits of beams, beams,haunching cantilever girders not exceeding 1mtr. Depth.

Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.

Slopping and battering surfaces I/c folding plates where inclination to horizontal plane not exceeding 30 degrees.

Edge of slab and break in floor 20 cm wide

Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete

Providing wopopd work in frames of doors windows cleastorey window etc.

Painting two coats excluding priming coat over new wood and wood base surfaces after and including the surface smooth.

Distempering (two coats) withoil bound washable distemperof approved brand andof approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including aprimming coat with distemper primmer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth .

Applying one coat of disteper primer of approved brand and manufactur on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth sq.m 8.75 17.45

Providing and fixing panelled glazed panelled or glazed shutter for door and window cleastorey window etc.2nd class d/wood

Providing and fixing wire gauge shutter galvanised M.S wire gaugeof IS gauge designation 0.85G with wire of dia 0.56mm for door and windows and clerestorey with necessary screw.

Providing and fixing brass double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium / wooden door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge I/c making good the floors.

Providing and fixing brass over head hydraulic Hinges door closer of approved brand and manufacture (conforming to IS specification ISI marked) for door with screws complete as per the direction of Engineer-In-Charge .

Providing and fixing magnetic catcher (M-15) including carriage of materials within all leads and lifts.

Providing and fixing ornamental 20mm dia brass hanger rod with brackets on both ends with screws etc complete including carriage of materials within all leads and lifts.

Providing and fixing ornamental brasscoat hooks strip with six hooks fixed with rawl plugs & screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing brass 100mm morice latch and lock with six levers and a pair of handles and knobs including necessary screws etc. as approved by the engineer-in-charge complete including carriage of materials within all leads and lifts.

Applying a priming coat over new wood and wood surfaces including preparing the surface smooth.

10 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand)

Providing and fixing butt hings stainless steel hings with bolts and nuts screws etc. complete.

Providing and fixing Stainless Steel almira lock chorme with screws etc. complete.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete.

Providing and fixing channel for cup Board with the necessary screws etc complete

Providing and fixing 19mm thick Commercial kit ply (gold) board or equivalent water proof shutters for Cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica ) on boards /ply wood sheet with approved adhesive and nails etc complete.

Sushil Chauhan (BID ID -513269)

Babu Ram (BID ID -513280)